10-FZ071SA100SM02-L526L18 target datasheet flow S-PFC 0 650 V / 100 A Features flow 0 12mm housing ● Ultra fast IGBT and recovery boost diodes ● Integrated capacitor ● Temperature sensor Schematic Target applications ● Grid connected motor drive ● UPS ● Battery charger Types ● 10-FZ071SA100SM02-L526L18 Maximum Ratings Tj=25°C, unless otherwise specified Parameter Condition Symbol Value Unit 650 V 75 A 300 A 106 W Boost Switch Collector-emitter voltage Collector current V CES IC T j = T jmax T S =80 °C Repetitive peak collector current I CRM t p limited by T jmax Total power dissipation P tot T j = T jmax Gate-emitter voltage V GES ±20 V Maximum Junction Temperature T jmax 175 °C Copyright Vincotech 1 T S =80 °C 27 Nov. 2015 / Revision 2 10-FZ071SA100SM02-L526L18 target datasheet Parameter Conditions Symbol Value Unit 650 V 82 A 200 A 106 W 175 °C Value Unit 650 V 17 A 20 A 33 W 175 °C Value Unit 1600 V 80 A 890 A 3960 A s 100 W 150 °C Boost Diode Peak Repetitive Reverse Voltage V RRM Continuous (direct) forward current IF Repetitive peak forward current I FRM Total power dissipation P tot Maximum Junction Temperature T jmax Parameter T j = T jmax T s = 80°C T j = T jmax T s = 80°C Conditions Symbol Boost Sw. Protection Diode Peak Repetitive Reverse Voltage DC forward current V RRM IF Repetitive peak forward current I FRM Power dissipation P tot Maximum Junction Temperature T jmax Parameter T S=80°C T j=T jmax T S=80°C T j=T jmax Conditions Symbol Rectifier Diode Peak Repetitive Reverse Voltage Continuous (direct) forward current Surge (non-repetitive) forward current V RRM IF T j = T jmax I FSM t p = 10 ms, sin 180° T j = 150°C 2 Surge current capability I t Total power dissipation P tot Maximum Junction Temperature T jmax Copyright Vincotech T s = 80°C T j = T jmax 2 T s = 80°C 2 27 Nov. 2015 / Revision 2 10-FZ071SA100SM02-L526L18 target datasheet Parameter Conditions Value Unit V MAX 630 V T op -55…+125 °C Value Unit Symbol DC Link Capacitance Maximum DC voltage Operation Temperature Module Properties Parameter Conditions Symbol Thermal Properties Storage temperature T stg -40…+125 °C Operation Junction Temperature T jop -40…+(T jmax - 25) °C 4000 V min 12,7 mm 9,75 mm Isolation Properties Isolation voltage V isol DC voltage Creepage distance Clearance Comparative Tracking Index Copyright Vincotech t p=2s >200 CTI 3 27 Nov. 2015 / Revision 2 10-FZ071SA100SM02-L526L18 target datasheet Characteristic Values Boost Switch Parameter Symbol Conditions V GE [V] V CE [V] Value I C [A] T j[ °C] Unit Min Typ Max 3,2 4 4,8 25 1,40 2,1 125 1,48 150 1,50 Static Gate-emitter threshold voltage Collec tor-emitter saturation voltage V GE(th) V GE=V CE 0,001 15 V CEsat 100 Collec tor-emitter c ut-off current I CES 0 650 Gate-emitter leakage c urrent I GES 20 0 25 125 25 100 100 125 rg none Input capacitance C ies 6560 Output capacitance C oes Reverse t ransfer c apac itanc e C res Internal gate resistance Gate c harge f=1 MHz 0 V 125 25 25 µA nA Ω 97 25 V pF 21 15 Qg 520 100 25 210 nC 0,9 K/W Value Unit Thermal Thermal resistance junc tion to sink R th(j-s) Phase-Change Material ʎ =3,4W /mK Boost Diode Parameter Symbol Conditions V r [V] I F [A] T j [°C] Min Typ Max 25 1,50 1,77 125 1,43 150 1,40 Static Forward voltage Reverse leakage c urrent 100 VF 650 Ir 25 V 5,3 150 µA Thermal Thermal resistance junc tion to sink Copyright Vincotech R th(j-s) phase-c hange material ʎ =3,4W/mK 0,9 4 K/W 27 Nov. 2015 / Revision 2 10-FZ071SA100SM02-L526L18 target datasheet Boost Sw. Protection Diode Parameter Conditions Symbol Value V r [V] I F [A] T j [°C] Min Unit Typ Max 25 1,67 1,87 125 1,56 Static Forward voltage 10 VF V 150 Reverse leakage current 25 650 Irm 0,14 150 µA Thermal Thermal resistanc e junction to sink Rth(j-s) phase-c hange material ʎ =3,4W/mK 2,87 K/W Value Unit Rectifier Diode Parameter Symbol Conditions V r [V] I F [A] T j [°C] Min Typ Max 25 1,10 1,9 125 1,05 Static Forward voltage 75 VF V 150 Reverse leakage c urrent 1600 Ir 25 50 150 1100 µA Thermal Thermal resistance junc tion to sink Copyright Vincotech R th(j-s) phase-c hange material ʎ =3,4W/mK 0,7 5 K/W 27 Nov. 2015 / Revision 2 10-FZ071SA100SM02-L526L18 target datasheet DC Link Capacitance Parameter Symbol Conditions Value T j [°C] Capacitance Min Typ Unit Max 150 C Tolerance -10 nF +10 % Thermistor Parameter Conditions Symbol V GE [V] Rated resistance ΔR/R Power dissipation P I C [A] T j[ °C] Min 25 R Deviation of R100 V CE [V] Value R100=1486 Ω 100 Power dissipation constant Typ Unit Max 21,5 -4,5 kΩ +4,5 % 25 210 mW 25 3,5 mW/K B-value B(25/50) 25 3884 K B-value B(25/100) 25 3964 K Vincotech NTC Reference Copyright Vincotech F 6 27 Nov. 2015 / Revision 2 10-FZ071SA100SM02-L526L18 target datasheet Ordering Code & Marking Version without thermal paste 12mm housing with thermal paste 12mm housing NN-NNNNNNNNNNNNNN NNNNNNNN WWYY UL Vinco LLLLL SSSS Ordering Code 10-FZ071SA100SM02-L526L18 10-FZ071SA100SM02-L526L18-/3/ Text Datamatrix in DataMatrix as L526L18 L526L18 in packaging barcode as L526L18 L526L18-/3/ Name Date code UL & Vinco Lot Serial NN-NNNNNNNNNNNNNN-NNNNNNNN WWYY UL Vinco LLLLL SSSS Type&Ver Lot number Serial Date code TTTTTTTVV LLLLL SSSS WWYY Outline Pin table [mm] Pin X Y Function 1 33,6 0 DC- 2 30,8 0 DC- 3 22 0 GND 4 19,2 0 N.A 5 12,9 0 S14 6 10,1 0 G14 7 2,8 0 N.A. 8 0 0 N.A. 9 0 7,1 Ph 10 0 9,9 Ph 11 0 12,7 Ph 12 0 15,5 N.A. 13 0 22,6 C13 14 2,8 22,6 N.A. 15 10,1 22,6 G13 16 12,9 22,6 S13 17 19,2 22,6 N.A. 18 22 22,6 GND 19 30,8 22,6 DC+ 20 33,6 22,6 DC+ 21 33,6 14,8 22 33,6 8,2 Therm1 Therm2 Copyright Vincotech 7 27 Nov. 2015 / Revision 2 10-FZ071SA100SM02-L526L18 target datasheet Pinout Identification ID Component Voltage Current Function T13,T14 IGBT 650V 100A Boost Switch D13,D14 FWD 650V 100A Boost Diode D43,D44 FWD 650V 10A Boost Sw. Protection Diode D11,D12 Rectifier 1600V 75A Rectifier Diode C10,C20 Capacitor 630V - DC Link Capacitance NTC NTC - - Thermistor Copyright Vincotech 8 Comment 27 Nov. 2015 / Revision 2 10-FZ071SA100SM02-L526L18 target datasheet Packaging instruction Standard packaging quantity (SPQ) 135 >SPQ Standard <SPQ Sample Handling instruction Handling instructions for flow 0 packages see vincotech.com website. Package data Package data for flow 0 packages see vincotech.com website. Document No.: Date: 10-FZ071SA100SM02-L526L18-T2-14 27 Nov. 2015 Modification: Pages Product status definition Datasheet Status Product Status Target Formative or In Design Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. The data contained is exclusively intended for technically trained staff. DISCLAIMER The information, specifications, procedures, methods and recommendations herein (together “information”) are presented by Vincotech to reader in good faith, are believed to be accurate and reliable, but may well be incomplete and/or not applicable to all conditions or situations that may exist or occur. Vincotech reserves the right to make any changes without further notice to any products to improve reliability, function or design. No representation, guarantee or warranty is made to reader as to the accuracy, reliability or completeness of said information or that the application or use of any of the same will avoid hazards, accidents, losses, damages or injury of any kind to persons or property or that the same will not infringe third parties rights or give desired results. It is reader’s sole responsibility to test and determine the suitability of the information and the product for reader’s intended use. LIFE SUPPORT POLICY Vincotech products are not authorised for use as critical components in life support devices or systems without the express written approval of Vincotech. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in labelling can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Copyright Vincotech 9 27 Nov. 2015 / Revision 2