■ Mounting the XC4W The C-shaped Spring supplied with the XC4W Contacts is needed to mount the XC4W to the XC4/XC4N Housing. It does not lock the Contacts securely to the hous- ing, but is used for self-alignment to keep the contact terminals from bending when mating. The Contacts may bend slightly after they are connected if lateral force is applied to them. Make sure the Contacts are not bent prior to wiring. • Right-angle Contacts Contact Removal Tool ■ XC4M/XC4N Tools Press-fit Tool and Mold (unit: mm) Solder XY2D-0011 (Press-fit Tool and Mold) XY2D-0012 (Mold for 2.2 mm dia. sleeve) XY2D-0013 (Mold for 3.2 mm dia. sleeve) XY2D-0014 Metal cap Insulator Braided shield (93.5) (70.5) Sleeve B(5.5) Coaxial Cable Solder the core and press fit the sleeve as you would a straight contact. Insert the insulator and cover it with a metal cap. Do not solder the cap to the contact. Model XY2D-0011 Braided shield Core • The Press-fit Tool connects a coaxial cable to a coaxial contact. • Place the sleeve over the terminal end of the coaxial cable and insert the contact. solder the core of the coaxial cable. Solder Unit: mm Coaxial Contact Sleeve Coaxial Cable • Slide the sleeve in place and press fit it with the Press-fit Tool. Sleeve a Straight 9.5 +0/−0.3 cableconnecting contacts 5.5 dia. 1 dia. 4.8 dia. b 7 +0/−0.3 Section A 14 dia. Note 1. Section A is covered. Note 2. Section B moves from 5.5 to 26. Note 3. Section C moves from 13.4 to 0. Model XY2D-0013 Braided shield 11.9 XY2D-0014 Cable Dimensions XY2D-0012 C(13.4) 19.8 dia. c 4 ±0.3 • High-current Contacts and Coaxial Contacts can be inserted into the Contact Housing manually by pushing them in from the back of the Connector. • Use the special tool shown above to remove Contacts. • Pull out the Removal Tool lance. Align the four ridges on the end of the Tool with the four ridges on the Contact Housing. Push the lance in firmly. • The Contact can then be easily removed by pushing in the lance. • Perform these steps from the mating side of the Connector. Right-an- 11.5 +0/−0.5 10 +0/−0.5 5.5 ±0.5 gle cableconnecting contacts DIN Medium/High-Current Connectors XC4 15