UNISONIC TECHNOLOGIES CO., LTD MBR5150 Preliminary DIODE SCHOTTKY BARRIER RECTIFIER DESCRIPTION The UTC MBR5150 is a schottky barrier rectifier, it uses UTC’s advanced technology to provide customers with low forward voltage drop, high current capability and high efficiency, etc. The UTC MBR5150 is suitable for free wheeling, high frequency inverters, low voltage and polarity protection applications. FEATURES * Low forward voltage drop * High efficiency * Low power loss * High surge capability SYMBOL ORDERING INFORMATION Ordering Number Package Lead Free Halogen Free MBR5150L-TA2-T MBR5150G-TA2-T TO-220-2 MBR5150L-Z21D-B MBR5150G-Z21D-B DO-201AD Note: Pin Assignment: A: Anode K: Common Cathode Pin Assignment 1 2 K A K A Packing Tube Tape Box MARKING INFORMATION TO-220-2 DO-201AD Cathode Band for uni-directional Only MBR5150 www.unisonic.com.tw Copyright © 2015 Unisonic Technologies Co., Ltd L: Lead Free G: Halogen Free Date Code 1 of 3 QW-R601-263.b MBR5150 Preliminary DIODE ABSOLUTE MAXIMUM RATINGS Ratings at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. PARAMETER SYMBOL RATINGS UNIT DC Blocking Voltage VDC 150 V RMS Voltage VRMS 105 V Recurrent Peak Reverse Voltage VRRM 150 V Average Rectified Output Current IF(AV) 5.0 A Non-Repetitive Peak Forward Surge Current: 8.3ms IFSM 150 A Single Half Sine-Wave Superimposed on Rated Load Operating Junction Temperature TJ -65~+150 °C Storage Temperature TSTG -65~+150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. THERMAL DATA PARAMETER Junction to Ambient (Note 2) Junction to Case (Note 1) SYMBOL θJA θJC RATINGS 50 12 UNIT °C/W °C/W ELECTRICAL CHARACTERISTICS PARAMETER SYMBOL TEST CONDITIONS IF=5.0A TJ=25°C Forward Voltage Drop (Note 3) VF IF=5.0A, TJ=100°C Peak Reverse Current at Rated DC TJ=25°C IR Blocking Voltage TJ=100°C Notes: 1. Measured at ambient temperature at a distance of 9.5mm from the case 2. Minimum Pad Area 3. Pulse test: 300μs pulse width, 1% duty cycle UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN TYP MAX UNIT 0.9 V 0.7 V 50 μA 10 mA 2 of 3 QW-R601-263.b MBR5150 Preliminary DIODE UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R601-263.b