UNISONIC TECHNOLOGIES CO., LTD SB360 DIODE 3.0A SCHOTTKY BARRIER RECTIFIER DESCRIPTION The UTC SB360 is 3.0A schottky barrier rectifier. it uses UTC’s advanced technology to provide customers with high current capability and low forward voltage drop, etc. The UTC SB360 is suitable for free wheeling, low voltage and polarity protection applications, etc. FEATURES * Low forward voltage drop * High surge capability * Low power loss * High efficiency * High current capability ORDERING INFORMATION Ordering Number Lead Free Halogen Free SB360L-Z21D-B SB360G-Z21D-B SB360L-SMC-R SB360G-SMC-R Note: Pin Assignment: A: Anode K: Cathode Package DO-201AD SMC Pin Assignment 1 2 K A K A Packing Tape Box Tape Reel MARKING DO-201AD SMC Cathode Band for uni-directional Only SB360 L: Lead Free G: Halogen Free Date Code www.unisonic.com.tw Copyright © 2015 Unisonic Technologies Co., Ltd Cathode Band for uni-directional Only UTC SB360 Date Code L: Lead Free G: Halogen Free 1 of 3 QW-R601-081.C SB360 DIODE ABSOLUTE MAXIMUM RATINGS (TA=25°C unless otherwise specified) Single phase, half wave, 60Hz, resistive or inductive load. For capacitance load, derate current by 20%. PARAMETER SYMBOL RATINGS UNIT DC Blocking Voltage VR 60 V Working Peak Reverse Voltage VRWM 60 V Peak Repetitive Reverse Voltage VRRM 60 V RMS Reverse Voltage VR(RMS) 42 V Average Rectified Output Current (Note 2) TL=80°C IO 3.0 A Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load IFSM 80 A (JEDEC Method) Operating Junction Temperature TJ -65~+150 °C Storage Temperature TSTG -65~+150 °C Notes: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. 2. Measured at ambient temperature at a distance of 9.5mm from the case. THERMAL DATA PARAMETER SYMBOL RATINGS UNIT SMC 95 Junction to Ambient θJA °C/W DO-201AD 30 Note: Thermal resistance from junction to lead vertical P.C.B. mounted, 0.500" (12.7mm) lead length with 2.5x2.5" (63.5x63.5mm) copper pad. ELECTRICAL CHARACTERISTICS (TA =25°C unless otherwise specified.) Single phase, half wave, 60Hz, resistive or inductive load. For capacitance load, derate current by 20%. PARAMETER SYMBOL TEST CONDITIONS Reverse Breakdown Voltage V(BR)R IR=0.50mA Forward Voltage Drop VFM IF=3A, TJ=25°C VR=100V, TA=25°C Leakage Current IRM VR=100V, TA=100°C Note: Short duration pulse test used to minimize self-heating effect. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN 60 TYP MAX UNIT V 0.74 V 500 μA 10 mA 2 of 3 QW-R601-081.C SB360 DIODE UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R601-081.C