UNISONIC TECHNOLOGIES CO., LTD MGBR10L150 Preliminary DIODE MOS GATED BARRIER RECTIFIER DESCRIPTION The UTC MGBR10L150 is a surface mount mos gated barrier rectifier, it uses UTC’s advanced technology to provide customers with low forward voltage drop and high switching speed, etc. FEATURES * Low forward voltage drop * High switching speed SYMBOL ORDERING INFORMATION Ordering Number Lead Free Halogen Free MGBR10L150L-T27-R MGBR10L150G-T27-R Note: Pin Assignment: A: Anode K: Common Cathode Package TO-277 Pin Assignment 1 2 3 A K A Packing Tape Reel MARKING www.unisonic.com.tw Copyright © 2015 Unisonic Technologies Co., Ltd 1 of 3 QW-R202-049.a MGBR10L150 Preliminary DIODE ABSOLUTE MAXIMUM RATINGS (TA=25°C unless otherwise specified) Single phase, half wave, 60Hz, resistive or inductive load. For capacitance load, derate current by 20%. PARAMETER SYMBOL RATINGS UNIT DC Blocking Voltage VRM 150 V Working Peak Reverse Voltage VRWM 150 V Peak Repetitive Reverse Voltage VRRM 150 V Average Rectified Output Current TC=125°C IO 10 A Non-Repetitive Peak Forward Surge Current 8.3ms IFSM 150 A Single Half Sine-Wave Superimposed on Rated Load Operating Junction Temperature TJ -65~+175 °C Storage Temperature TSTG -65~+175 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. THERMAL CHARACTERISTICS PARAMETER Junction to Ambient Junction to Case SYMBOL θJA θJC RATINGS 73 13 UNIT °C/W °C/W ELECTRICAL CHARACTERISTICS (TA =25°C unless otherwise specified) PARAMETER Reverse Breakdown Voltage (Note 1) SYMBOL TEST CONDITIONS V(BR)R IR=0.50mA IF=10A, TJ=25°C Forward Voltage Drop VFM IF=10A, TJ=125°C VR=150V, TJ=25°C Leakage Current (Note 1) IRM VR=150V, TJ=125°C Notes: 1. Short duration pulse test used to minimize self-heating effect. 2. Thermal resistance junction to case mounted on heatsink. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN 150 TYP MAX UNIT V 0.8 0.9 V 0.8 V 25 200 μA 50 mA 2 of 3 QW-R202-049.a MGBR10L150 Preliminary DIODE UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R202-049.a