UNISONIC TECHNOLOGIES CO., LTD BAS316 Preliminary DIODE HIGH-SPEED DIODE DESCRIPTION The UTC BAS316 is high-speed diode, it uses UTC’s advanced technology to provide customers with high switching speed, etc. The UTC BAS316 is suitable for high-speed switching in e.g. surface mounted circuits. FEATURES * High switching speed SYMBOL ORDERING INFORMATION Ordering Number BAS316G-CB2-R Note: Pin Assignment: A: Anode K: Cathode Package SOD-323 Pin Assignment 1 2 K A Packing Tape Reel MARKING www.unisonic.com.tw Copyright © 2015 Unisonic Technologies Co., Ltd 1 of 3 QW-R201-095.a BAS316 Preliminary DIODE ABSOLUTE MAXIMUM RATINGS PARAMETER repetitive Peak Reverse Voltage Continuous Reverse Voltage Continuous Forward Current TS=90°C (Note 1) Repetitive Peak Forward Current RATINGS UNIT 85 V 75 V 250 mA 500 mA t=1µs 4 A Non-Repetitive Peak Forward Square Wave, IFSM t=1ms 1 A Current TJ=25°C Prior to Surge t=1s 0.5 A Total Power Dissipation TS=90°C (Note 1) PD 400 mW Operating Junction Temperature TJ 150 °C Storage Temperature TSTG -65~+150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. SYMBOL VRRM VR IF IFRM THERMAL CHARACTERISTICS PARAMETER SYMBOL Junction to Soldering Point (Note 2) θJS Notes: 1. TS is the temperature at the soldering point of the cathode tab. 2. Soldering point of the cathode tab. VALUE 150 UNIT K/W ELECTRICAL CHARACTERISTICS (TJ =25°C, unless otherwise specified) PARAMETER SYMBOL Forward Voltage VF Reverse Current IR Diode Capacitance CD Reverse Recovery Time trr Forward Recovery Voltage Vfr TEST CONDITIONS MIN IF=1mA IF=10mA IF=50mA IF=150mA VR=25V VR=75V VR=25V, TJ =150°C VR=75V, TJ =150°C f=1MHz, VR=0 When Switched from IF=10mA to IR=10mA, RL=100Ω, Measured at IR=1mA, See Fig.1 When Switched from IF=10mA, tr=20ns, See Fig.2 UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw TYP MAX UNIT 715 mV 855 mV 1 V 1.25 V 30 nA 1 µA 30 µA 50 µA 1.5 pF 4 ns 1.75 V 2 of 3 QW-R201-095.a BAS316 Preliminary DIODE TEST CIRCUITS AND WAVEFORMS I 1kΩ RS=50Ω D.U.T. 450Ω I V 90% OSCILLOSCOPE Vfr Ri=50Ω 10% tr tp input signal t t output signal Input signal: forward pulse rise time tr=20ns; forward current pulse duration tp≥100ns; duty factor δ≤ 0.005. Fig.2 Forward Recovery Voltage Test Circuit and Waveforms. UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R201-095.a