UNISONIC TECHNOLOGIES CO., LTD BAT42VS Preliminary DIODE SMALL SIGNAL PLANAR SCHOTTKY DIODE DESCRIPTION Planar Schottky diodes are encapsulated in the SOD-123 small plastic SMD package. Single diodes and dual diodes with different pin configuration are available. + SOD-123 FEATURES * Low forward voltage * Guard ring protected * Small plastic SMD package * feature very low turn-on voltage and fast switching ORDERING INFORMATION Ordering Number BAT42VSG-CA2-R Note: Pin assignment: A: Anode K: Cathode Package SOD-123 Pin Assignment 1 2 A K Packing Tape Reel MARKING www.unisonic.com.tw Copyright © 2015 Unisonic Technologies Co., Ltd 1 of 3 QW-R201-097.a BAT42VS Preliminary DIODE ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified) PARAMETER SYMBOL RATINGS UNIT PER DIODE Continuous Reverse Voltage VR 30 V Continuous Forward Current IF 200 mA Repetitive Peak Forward Current (tP <1s, δ≤0.5) IFRM 500 mA Non-repetitive Peak Forward Current (tP <10ms) IFSM 400 mA Power Dissipation (TA ≤ 25°C) PD 200 mW Junction Temperature TJ +125 °C Storage Temperature TSTG -60 ~ +150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. THERMAL CHARACTERISTICS PARAMETER Junction to Ambient SYMBOL θJA RATINGS 625 UNIT °C/W ELECTRICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified) PARAMETER SYMBOL Forward Voltage VF Reverse Current IR Reverse Recovery Time trr Diode Capacitance CD TEST CONDITIONS IF = 10mA IF = 50mA IF = 200mA VR = 25V When switched from IF =10mA to IR = 10mA, RL = 100Ω measured at IR = 1mA f = 1 MHz, VR = 1V UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN TYP MAX UNIT 0.4 V 0.65 V 1.00 V 0.5 μA 5.0 7 ns pF 2 of 3 QW-R201-097.a BAT42VS Preliminary DIODE UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R201-097.a