UNISONIC TECHNOLOGIES CO., LTD MBR20100 Preliminary DIODE SCHOTTKY BARRIER RECTIFIER 1 FEATURES * 20 Amps Total (10 Amps Per Diode Leg) * Guard Ring for Transient Protection * Low Forward Voltage Drop * High Surge Capability * Low Power Loss/High Efficiency 2 SYMBOL ORDERING INFORMATION Ordering Number Lead Free Halogen Free MBR20100L-Z21D-B MBR20100G-Z21D-B Note: Pin Assignment: A: Anode K: Cathode MBR20100L-Z21D-B Package DO-201AD Pin Assignment 1 2 K A DO-201AD Packing Tape Box (1)Packing Type (1) B: Tape Box (2)Package Type (2) Z21D: DO-201AD (3)Green Package (3) L: Lead Free, G: Halogen Free and Lead Free MARKING Cathode Band for uni-directional Only R20100 L: Lead Free G: Halogen Free Date Code www.unisonic.com.tw Copyright © 2015 Unisonic Technologies Co., Ltd 1 of 3 QW-R202-047.b MBR20100 Preliminary ABSOLUTE MAXIMUM RATINGS (TA=25°C, unless otherwise specified) PARAMETER Maximum Repetitive Peak Reverse Voltage Maximum DC Blocking Voltage Working Peak Reverse Voltage Maximum PMS Reverse Voltage Average Forward Rectified Output Current Non-Repetitive Peak Forward Surge Current 8.3ms Single Half-Sine-Wave Junction Capacitance (Note 4) Operating Temperature Storage Temperature SYMBOL VRRM VR VRWM VR(RMS) IO RATINGS 100 100 100 90 20 UNIT V V V V A IFSM 150 A CJ TJ TSTG 1000 -55 ~ +150 -55 ~ +150 pF °C °C RATINGS 20 UNIT °С/W THERMAL RESISTANCES CHARACTERISTICS PARAMETER SYMBOL θJA Junction to Ambient DIODE ELECTRICAL CHARACTERISTICS PARAMETER Instantaneous Forward Voltage Drop (Note 3) SYMBOL TEST CONDITIONS MIN TYP MAX UNIT IF=20A, TC=25°C 0.84 V VF IF=20A, TC=125°C 0.74 V Rated DC Voltage, TC=25°C 0.1 mA Instantaneous Reverse Current (Note 3) IR Rated DC Voltage, TC=125°C 30 mA Notes: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. 2. 2.0μs Pulse Width, f = 1.0KHz. 3. Pulse Test: Pulse Width = 300µs, Duty Cycle ≤ 2.0%. 4. Applied VR = 4.0V and f = 1.0MHz. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 3 QW-R202-047.b MBR20100 Preliminary DIODE UTC assum es no responsibility for equipm ent failures that result from using products at v alues that exceed, ev en m om entarily, rated v alues (such as m axim um ratings, operating condition ranges, or other param eters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or system s where m alfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The inform ation presented in this docum ent does not form part of any quotation or contract, is believ ed to be accurate and reliable and m ay be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R202-047.b