Datasheet

UNISONIC TECHNOLOGIES CO., LTD
MBR1060C
DIODE
10A SCHOTTKY BARRIER
RECTIFIER DIODES

FEATURES
* Schottky Barrier Chip
* Guard Ring Die Construction for Transient Protection
* Low Power Loss, High Efficiency
* High Surge Capability
* High Current Capability and Low Forward Voltage Drop
* For Use in Low Voltage, High Frequency Inverters, Free
* Wheeling, and Polarity Protection Applications

SYMBOL

ORDERING INFORMATION
Ordering Number
Lead Free
Halogen Free
MBR1060CL-TA3-T
MBR1060CG-TA3-T
MBR1060CL-TF3-T
MBR1060CG-TF3-T
MBR1060CL-TF1-T
MBR1060CG-TF1-T
MBR1060CL-TQ2-T
MBR1060CG-TQ2-T
MBR1060CL-TQ2-R
MBR1060CG-TQ2-R
Note: Pin Assignment: A: Anode
K: Cathode

Package
TO-220
TO-220F
TO-220F1
TO-263
TO-263
Pin Assignment
1
2
3
A
K
A
A
K
A
A
K
A
A
K
A
A
K
A
Packing
Tube
Tube
Tube
Tube
Tape Reel
MARKING
www.unisonic.com.tw
Copyright © 2015 Unisonic Technologies Co., Ltd
1 of 3
QW-R601-019. E
MBR1060C

DIODE
ABSOLUTE MAXIMUM RATINGS (TA=25°C, unless otherwise specified)
PARAMETER
SYMBOL
RATINGS
UNIT
Maximum Repetitive Peak Reverse Voltage
VRRM
60
V
Maximum DC Blocking Voltage
VR
60
V
Working Peak Reverse Voltage
VRWM
60
V
Maximum PMS Reverse Voltage
VR(RMS)
42
V
5
Per Leg
Average Forward Rectified Output
A
IO
Current (TC=105°C)
Total
10
Non-Repetitive Peak Forward Surge Current 8.3ms Single
IFSM
125
A
Half-Sine-Wave
Typical Junction Capacitance (Note 4)
CJ
150
pF
Operating Temperature
TJ
-55 ~ +150
°C
Storage Temperature
TSTG
-55 ~ +150
°C
Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.

THERMAL DATA
PARAMETER
SYMBOL
θJA
Junction to Ambient
Junction to Case

TO-220/TO-263
TO-220F/TO-220F1
θJC
RATINGS
60
3
5
UNIT
°С/W
°С/W
°С/W
ELECTRICAL CHARACTERISTICS
PARAMETER
SYMBOL
Instantaneous Forward Voltage Drop (Note 2)
VF
Instantaneous Reverse Current (Note 2)
IR
TEST CONDITIONS
IF=5A, TC=25°C
IF=5A, TC=125°C
IF=10A, TC=25°C
IF=10A, TC=125°C
Rated DC Voltage, TC=25°C
Rated DC Voltage, TC=125°C
MIN
TYP MAX UNIT
0.80
V
0.70
V
0.95
V
0.90
V
100 μA
15
mA
Notes: 1. 2.0μs Pulse Width, f = 1.0 KHz.
2. Pulse Test: Pulse Width = 300µs, Duty Cycle ≤ 2.0%.
3. Applied VR = 4.0V and f = 1.0MHz.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
2 of 3
QW-R601-019. E
MBR1060C
Instantaneous Forward Current (A)
TYPICAL CHARACTERISTICS
Instantaneous Reverse Current (A)
Average Rectified Current (A)

DIODE
1
UTC assum es no responsibility for equipm ent failures that result from using products at v alues that
exceed, ev en m om entarily, rated v alues (such as m axim um ratings, operating condition ranges, or
other param eters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or system s where
m alfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The inform ation
presented in this docum ent does not form part of any quotation or contract, is believ ed to be accurate
and reliable and m ay be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
3 of 3
QW-R601-019. E