SMD TYPE LED Suntan ® TSL-1206UG000MTH FEATU R E S APPLI CAT I O N S ‧ Wide Viewing Angle 120 o ‧ Optical indicator ‧ Reflow Solderable ‧ Indoor display ‧ High Luminous Intensity and Low Power Dissipation ‧ Backlighting in dashboard and switch ‧ Good Reliability and Long Life ‧ Flat Backlighting for LCD, symbol and display ‧ Complied With RoHS Directive ‧ General use T E C H N I CAL DATA S H E E T This product is generally used as indicator and luminary for electronic equipment such as household appliance, communication equipment and dashboard. Notes: 1. All dimension units are millimeters. All dimension tolerance is ±0.2mm unless otherwise noted. 2. Selection Guide Dice Lens Type Green (InGaN) Water Clear Min Luminous intensity (mcd) @ 20mA Typ Max Viewing Angle 2Ø1/2 150 400 800 120 Note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. The above luminous intensity measurement allowance tolerance ±10% Electrical / Optical Characteristics at Ta=25℃ Parameter Forward Voltage Reverse Current Dominate Wavelength Symbol VF IR λd Min. 2.8 -515 Typ. 3.0 --- Max 3.6 10 525 Units V uA nm Test conditions IF=20mA VR=5V IF=20mA Absolute Maximum Ratings at Ta=25℃ Parameter Symbol Power Dissipation Pd DC Forward Current IF Peak Forward Current 【1】 IFP Reverse Voltage VR Electrostatic Discharge (HBM) ESD Operating Temperature Topr Storage Temperature Tstg Note: 1. 1/10 Dut cycle, 0.1ms pulse width. 2. The above forward voltage measure ment allowance tolerance ±0.1V. Suntan® Technology Company Limited Website: www.suntan.com.hk Rating 160 25 100 5 ±2000 -30~+85 -40~+100 Email: [email protected] Units mW mA mA V V ℃ ℃ Tel: (852) 8202 8782 Fax: (852) 8208 6246 SMD TYPE LED Suntan ® TSL-1206UG000MTH Typical Optical Characteristics Curves Ambient Temperature VS. Forward Current Suntan® Technology Company Limited Website: www.suntan.com.hk Email: [email protected] Tel: (852) 8202 8782 Fax: (852) 8208 6246 SMD TYPE LED Suntan ® TSL-1206UG000MTH Carrier Tape All dimensions in mm, tolerances unless mentioned is ±0.1mm. Moisture Resistant Packaging Note: Specification are subject to change without notice. For more detail and update, please visit our website. Suntan® Technology Company Limited Website: www.suntan.com.hk Email: [email protected] Tel: (852) 8202 8782 Fax: (852) 8208 6246