Suntan Su ® ® ABS2 THRU ABS10 Single Phase 1.0 AMPS.Glass Passivated Bridge Rectifiers Voltage Range 200 to 1000 Volts Current1.0 Amperes ABS FEATU R E S ◆Ideal for printed circuit board ◆Reliable low cost construction technique results in inexpensive product ◆High temperature soldering guaranteed: 260℃ / 10 seconds / 0.375” ( 9.5mm ) lead length at 5 lbs., ( 2.3 kg ) tension ◆UL Recognized File number: E347215 MECHANICAL DATA ◆Case: Molded plastic ◆Lead: solder plated ◆Polarity: As marked MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25℃ ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load.For capacitive load, derate current by 20% Type Number ABS2 ABS4 ABS6 ABS8 ABS10 UNITS Maximum Repetitive Peak Reverse Voltage VRRM 200 400 600 800 1000 V Maximum RMS Voltage VRMS 140 280 420 560 700 V VDC 200 400 600 800 1000 V Maximum DC Blocking Voltage Maximum Average Forward Rectified Current I(AV) On glass-epoxy P.C.B. On aluminum substrate 0.8 1.0 A Peak Forward Surge Current, 8.3ms Single Half Sine-wave Superimposed on Rated IFSM 30 A VF 0.95 V Load (JEDEC method ) Maximum Instantaneous Forward Voltage at 0.4A Maximum DC Reverse Current @ TA=25℃ Rated DC Blocking voltage per leg TA=125℃ Typical Thermal Resistance (Note1) (Note2) Operating Temperature Range Storage Temperature Range IR 10 150 μA RθJA 62.5 RθJL 25 TJ -55 to +150 ℃ TSTG -55 to +150 ℃ Note: 1. 1.On aluminum suvstrate P.C.B. with an area of 0.8×0.8”(20×20mm) mounted on 0.05×0.05”(1.3×1.3mm) solder pad. 2. On glass epoxy P.C.B. mouted on 0.05×0.05”(1.3×1.3mm) pads. ℃/W Suntan Su ® ® ABS2 THRU ABS10 Single Phase 1.0 AMPS.Glass Passivated Bridge Rectifiers Voltage Range200 to 1000 Volts Current1.0 Amperes RATING AND CHARACTERISTIC CURVES ABS2 THRU ABS10 Note: Specification are subject to change without notice. For more detail and update, please visit our website. Suntan® Technology Company Limited Website: www.suntan.com.hk Email: [email protected] Tel: (852) 8202 8782 Fax: (852) 8208 6246