1 2 3 4 5 6 7 8 (mm) Th = 298K U max Pc max ∆ T max I max A Hu0.02 Bu0.02 B Acu0.2 r 0.02 Ahu0.2 (A) High Power Density Cycling TEM PC-072-14-06 15.4 PC-128-10-05 9 PC-128-14-06 15.4 PC-128-20-08 24 PC-200-14-06 15.4 PC-200-14-11 8.5 PC-288-10-05 9 PC-288-10-08 6 PC-288-14-06 15.4 PC-288-14-11 8.5 A C RAC (V) (W) (°C) (ohm) 8.9 15.8 15.8 15.8 25.0 24.9 35.8 35.8 35.8 35.8 85.1 88.2 151.4 235.5 236.5 127.5 198.4 127.6 340.5 182.6 68 68 68 70 68 71 68 71 68 71 0.45 1.38 0.82 0.55 1.28 2.36 3.11 4.83 1.84 3.39 Ac Ah B H L S AWG 30 30 40 55 40 40 40 40 52 52 34 34 44 59 44 44 44 44 56 56 30 30 40 55 40 40 40 40 52 52 3.3 2.5 3.3 4.0 3.3 3.8 2.5 3.1 3.3 3.8 200 200 300 200 200 200 200 200 200 200 22 24 22 22 22 24 24 24 22 24 A B Pc max = Cooling power at ∆T = 0 and I = I max. ∆T max = Temperature difference at I = I max and Pc = 0. Increased hot side temperature gives increased U max, Pc max and ∆T max. At Th = 50°C ∆T max increases by 10°C and Pc max by 10%. Max temperature Th/Tc = 110°C for best long term performance. Max mounting preassure: 2.5MPa. Wires: Teflon (PTFE) insulated wires. i 0.04 A r 0.02 C D Lu20 D This drawing is the property of Laird Technologies, Inc. Protected in accordance with prevailing law. Cold side Revision notes and dates (yymmdd): E E Rev. 1: 060503, RoHS compatible, Maximum Thot/Tcold 110°C. Rev. 0: 060308, No changes. Material: Bi2Te3, Al2O3 , General tolerances: First angle Project: Customer: SS-ISO 2768-1 m projection: Dimension units: Metric: [mm] Comment/Treating: Porch style module Designed by: F S Molin Black (-) 1 Approved by: 3 Release date: H Lindberg 20060503 Laird Technologies S-43153 Mölndal, Sweden tfn: +46 31 420530, fax: +46 31 247909 e-mail: [email protected] Web: www.lairdtech.com Red (+) 2 Checked by: 6 PC Title: F Laird Tech TE-MODULE POWER Part nr: PC-XXX-XX-XX 7 G:\Engineering\Komponent\TEM\PC-XXX-XX-XX.dft Rev. Version: 1 TEM Scale: Size, sheet 2:1 8 A3, 1(1)