HIGH PERFORMANCE SERIES Miniature modules This range has been specially developed for low-effect applications where space is limited, such as optical components, sensors and lasers typically found in the opto-electronics and telecom industries. Our superior TE-material makes it possible to achieve ∆T up to 74°C (at Thot = 25°C). Standard sizes range from 2.5 x 2.5 mm up to 13.2 x 13.2 mm. Standard internal solder temperature is 138°C (Th max 80°C). Optionally we can offer 183°C and 232°C internal solder – both with an operating temperature of up to 150°C. Gold metallization and pretinning (95, 138 or 183°C) are other options. We also provide miniature TEMs on request. Product No. H±0,2 B±0,2 // 0,04 A 0,02 Ac±0,2 Ah±0,2 0,02 A Cold side L±20 -Input +Input • RAC tolerance = ±10% • Tolerance of Imax, Umax, Qmax = ±5% S Miniature modules PE-008-03-09 PE-018-03-09 PE-032-03-09 PE-007-06-11 PE-017-06-11 PE-018-06-11 PE-023-06-11 PE-029-06-11 PE-031-06-11 PE-068-06-11 PE-007-05-15 PE-011-05-15 PE-017-05-15 PE-031-05-15 PE-065-05-15 PE-007-07-10 PE-011-07-10 PE-017-07-10 PE-031-07-10 PE-065-07-10 Imax (A) Umax (V) Pc max (W) ∆T max (°C) 0.5 0.5 0.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 0.8 0.8 0.8 0.8 0.8 2.4 2.4 2.4 2.4 2.4 1.0 2.2 3.9 0.9 2.1 2.2 2.8 3.6 3.8 8.3 0.9 1.4 2.1 3.8 8.1 0.9 1.4 2.1 3.8 8.1 0.3 0.6 1.1 0.8 2.0 2.1 2.6 3.3 3.6 7.8 0.4 0.7 1.1 2.0 4.2 1.3 1.9 2.9 5.3 11.1 71 71 71 72 72 72 72 72 72 72 74 74 74 74 74 72 72 72 72 72 1) Bare wire, Ni over Cu, diameter in mm 2) Teflon insulated wire. Cross section in mm2 7 RAC (ohm) A / Ac 1.82 4.29 7.62 0.42 1.12 1.22 1.53 1.87 2.03 4.35 0.88 1.45 2.15 4.11 8.2 0.34 0.53 0.82 1.49 3.12 2.5 3.5 5.0 4.0 6.0 6.0 8.2 10.2 8.0 13.2 4.0 4.0 6.0 8.0 11.0 6.0 6.0 8.0 10.0 14.0 Ah B H L S mm/mm2 3,5 4,5 6.0 2.5 3.5 5.0 4.0 6.0 6.0 6.0 6.0 8.0 13.2 4.0 6.0 6.0 8.0 12.0 6.0 8.0 8.0 10.0 15.0 2.05 2.05 2.05 2.7 2.7 2.7 1.95 2.7 2.7 2.7 3.0 3.0 3.0 3.0 3.0 2.5 2.5 2.5 2.5 2.5 50 50 50 50 50 50 50 50 50 50 50 50 50 50 100 50 50 50 50 50 0.251 0.251 0.251 0.251 0.251 0.251 0.251 0.251 0.251 0.251 0.072 0.072 0.072 0.072 0.072 0.142 0.142 0.142 0.142 0.142 (mm) 7.2