Standard modules Supercool`s thermoelectric modules for indus

HIGH PERFORMANCE SERIES
Standard modules
Supercool’s thermoelectric modules for industrial and commercial applications deliver the
market’s best cooling performance.
By using one or more TEMs, you can design a
cooling system with effects ranging from just
a few Watts all the way up to several hundred
Watts. With max. voltage from 0.9 V up to
30 V DC and an array of pellet geometries,
there’s every chance of finding just the right
module for your application. In the event that
our standard range doesn’t meet all your requirements, we offer a choice of other dimensions and
pellet geometries. Max. ∆T up to 75°C
(at Thot = 25°C).
To optimize service life, maximum warm side
temperature is 80°C.
Product No.
I max
(A)
U max
(V)
Pc max
(W)
∆T max
(°C)
R AC
(ohm)
A
B
H
L
Standard modules
PE-007-14-15
6.0
PE-017-10-15
3.4
PE-017-14-15
6
PE-031-08-15
2.2
PE-031-10-08
6
PE-031-10-13
3.9
PE-031-10-15
3.4
PE-031-14-15
6
PE-063-08-15
2.2
PE-063-10-15
3.4
PE-071-10-08
6
PE-071-10-13
3.9
PE-071-10-15
3.4
PE-071-14-11
8.5
PE-071-14-15
6
PE-071-14-25
3.9
PE-071-20-15
13.1
PE-127-08-15
2.2
PE-127-08-25
1.3
PE-127-10-08
6
PE-127-10-13
3.9
PE-127-10-15
3.4
PE-127-10-25
2
PE-127-14-11
8.5
PE-127-14-15
6
PE-127-14-25
3.9
PE-127-20-15
13.1
PE-127-20-25
8
PE-131-10-13
3.9
PE-161-12-10
6.7
PE-161-12-13
5
PE-161-12-15
4.4
PE-241-10-13
3.9
PE-241-10-25
2
PE-241-14-15
6
0.9
2.1
2.1
3.8
3.8
3.8
3.8
3.8
7.8
7.8
8.8
8.8
8.8
8.8
8.8
8.8
8.8
15.7
15.7
15.7
15.7
15.7
15.7
15.7
15.7
15.7
15.7
15.7
16.2
20.0
20.0
20.0
30.0
30.0
30.0
3.3
4.5
7.6
5.1
13.8
9.3
8.1
14.5
10.4
16.5
31.6
21.2
18.5
45.8
33.2
21.6
71.9
20.9
12.6
57.1
37.9
33.2
19.7
82.1
59.4
38.6
128.7
78.7
39.1
83.9
62.3
54.6
71.8
37.3
112.7
74
74
74
74
72
74
74
74
74
74
72
74
74
72
74
75
74
74
75
72
74
74
75
72
74
75
74
75
74
72
74
74
74
75
74
0.12
0.49
0.29
1.57
0.52
0.93
1.03
0.48
3.20
2.03
1.17
1.98
2.18
0.83
1.27
1.88
0.55
6.2
11.0
2.23
3.46
4.02
6.7
1.54
2.23
3.36
1.08
1.68
3.65
2.44
3.34
3.87
6.6
12.7
4.21
10
10
15
13
15
15
15
20
25
30
20
20
20
30
30
30
47
25
25
30
30
30
30
40
40
40
62
62
40
40
40
40
40
40
55
10
10
15
13
15
15
15
20
12
15
20
20
20
30
30
30
47
25
25
30
30
30
30
40
40
40
62
62
23
40
40
40
40
40
55
3.9
3.8
3.9
3.8
3.1
3.6
3.8
3.9
3.8
3.8
3.1
3.6
3.8
3.8
3.9
4.8
4.6
3.8
4.8
3.1
3.6
3.8
4.8
3.8
3.9
4.8
4.6
5.6
3.6
3.3
3.7
3.9
3.6
4.8
3.9
200
200
200
200
200
200
200
200
150
200
200
200
200
200
200
200
200
200
200
200
200
200
200
300
300
350
200
200
200
350
350
350
200
300
200
(mm)
S
Available
AWG # Sealing1
22
24
22
24
22
24
24
22
24
24
22
24
24
20
22
22
20
24
24
22
24
24
24
20
22
22
20
20
24
22
22
22
24
24
22
S
S
S
Sealed modules (-S or –E) available from stock
are given in the table below.
All high performance modules are available in a
sealed version on request.
S
S
S
S, E
S, E
S, E
S, E
S
S
S
S
S
1) S = Silicon sealed version available. E = Epoxy sealed version available. Note! Max ∆T is reduced by
2-3°C for S-type and 1-2°C for E-type.
6
Sealed versions
We also provide a selection of off-the-shelf standard TEMs with perimeter sealing.
Silicon moisture sealing: A cost-effective moisture sealing method suitable for most applications. Add –S after product code
(PE-071-14-15-S)
Epoxy moisture sealing: Moisture and vapor
sealing using special epoxy resin with low thermal conductivity. Add –E after product code
(PE-127-10-13-E)
• Lead wires are approved acc. to UL 1569.
• RAC tolerance = ±10%
• Tolerance of Imax, Umax, Qmax = ± 5%