CQSEMCSC6079

Panduit Pre-Configured Physical Infrastructure
VSPEX* 50 VM Cisco-HP Solution
CQSEMCSC6079
Overview
Panduit utilizes extensive converged infrastructure experience in providing the
optimal physical infrastructure to support an integrated cloud deployment.
Our validated designs include an appropriately-sized dynamic (shippable)
cabinet, pre-labeled connectivity bundles, proper grounding, effective thermal
and cable management. Panduit evaluates power, thermal and connectivity
requirements of each active component. From this, a balanced and scalable
rack elevation is created, integrated port-to-port network map is established,
CFD analysis is conducted, and proper load balancing is calculated.
Pre-assembled and kitted solutions provide significant time savings, reduced
risk and lowest TCO throughout procurement, installation, and upgrade
phases. This 50 virtual machines (VM) solution features a pre-engineered
solution that arrives ready for rapid and reliable deployment.
Technical Information
Connectivity for VSPEX* 50 VM
See Reverse for Details
2 switches (Cisco 3048)
3 servers (designed for most
IBM, HP, Dell 1 RU servers)
Dual disk controller (EMC 3150)
No Disruption Expansion
Up to 5 total servers
Up to 5 total DAE’s with optional
additional backup devices
Cabinet
600 x 1070 42 RU on dynamic shippable
shock pallet
79.8"H x 23.6"W x 42.0"D
(2026mm x 600mm x 1067mm)
Packaged cabinet height:
85 in. (215.9 cm)
Always follow active equipment manufacturer’s recommended installation practices
Detailed Installation Guide
Step-by-step assembly
Elevations
Port-to-port mapping by device labeled
cables grouped by device with specific,
easy to follow guide
Other VM Solutions Available
VSPEX* 100 VM Solution for Cisco-HP in 600 x 1200 Dynamic Cabinet
CQSEMCMC679
VSPEX* 125 VM Solution for Cisco-HP in 600 x 1200 Dynamic Cabinet
CQSEMCMPC679
VSPEX* 250 VM Solution for Cisco-HP in 600 x 1200 Dynamic Cabinet
CQSEMCLC679
These solutions can be ordered through EMC* Select (http://www.emc.com/select)
*EMC and VSPEX are Registered Trademarks of EMC Corporation.
w w w. pa n d u it.c o m
Panduit Pre-Configured Physical Infrastructure for VSPEX* 50 VM Cisco-HP Solution
Key Features and Benefits
Dynamic
cabinet
Allows for shipment of installed equipment
Single cabinet
600 x 1070 – 42 RU
Side panels, casters, shock pallet
and ramp
Always follow active equipment manufacturer’s recommended installation practices
Connectivity
package
Port-to-port labeling reduces installation
time while following industry best
practices for network device connectivity
Redundant shielded copper cables for
switch to data processor connectivity
(7) Shielded copper cables per server to
switch connectivity, including
management
Shielded copper switch interconnect
cables
Does not include EMC supplied interconnect cables
Thermal
solutions
Ensures improved airflow to the switch
for optimal thermal temperatures and
promotes hot/cold aisle segregation
Validated thermal solution
Customer
patch panel
Allows flexible connectivity of equipment
to customer network
(1) 48-port panel
Refer to patch panel section below in recommended accessories
Grounding
and bonding
Cable
management
Features components to ensure best
practices for grounding equipment; each
system includes cabinet to facility ground
and paint piercing grounding cage nuts
from equipment to cabinet
(2) 10 AWG whips for DPE and
(2) 6 AWG whips for discrete ground
of switches
Ensures cable routing and management
best practices while improving
cabinet airflow
Fingers at every RU
(1) ESD wrist strap for end user
Panduit part number:
CQSEMCSC6079
(VSPEX* 50 VM
Cisco-HP solution)
active gear not included
D-ring cable manager at switches
Recommended Accessories (Ordered Separately)
Customer Patch Panel Components – A network interface panel is included in each Panduit Pre-Configured Physical
Infrastructure Solution configuration to facilitate connection to the existing data center infrastructure. Panduit offers a variety of
QuickNet™ Patch Panel accessories to allow connection of multiple media types (copper and fiber) in a variety of termination
methods (pre-terminated cassettes, Mini-Com® Modules and/or field termination) providing scalability and flexibility for
changing network requirements. See more details on QuickNet™ Patch Panels at www.panduit.com.
Power Outlet Units (POU) – Panduit vertical power strips offer a convenient way to distribute power to active equipment
within racks and cabinets. Panduit recommends the following POU options which are sized to support this configuration with
full redundancy:
QZ1B1L2BN30P1
USA
208 V, 30 A, single-phase, (2) 20 A 2 pole breakers (1-C19, 4-C13 x 6)
Qty. 2
QZ1B1L2BN30P1J
Japan
200 V, 30 A, single-phase, (2) 20 A 2 pole breakers (1-C19, 4-C13 x 6)
Qty. 2
QZ1D2B2BM30P1
Europe/Korea
230 V, 32 A, single-phase, (2) 20 A 2 pole breakers (1-C19, 4-C13 x 6)
Qty. 2
QZ1B1N3BN30P1
USA
208 V, 30 A, 3-phase delta, (3) 20 A 2 pole breakers (1-C19, 4-C13 x 6)
Qty. 2
QZ1D2P6BM30P1
Europe/Korea/
230 V, 32 A, 3-phase wye, (6) 16 A single pole breakers (1-C19, 4-C13 x 6)
Australia/Russia
Qty. 2
QZ1B1N3BN30P1J
Japan
Qty. 2
200 V, 30 A, 3-phase delta (24) C-13 and (6) C-19 networked (3) 20 A
2 pole breakers
*EMC and VSPEX are Registered Trademarks of EMC Corporation.
WORLDWIDE SUBSIDIARIES AND SALES OFFICES
PANDUIT CANADA
Markham, Ontario
[email protected]
Phone: 800.777.3300
PANDUIT EUROPE LTD.
London, UK
[email protected]
Phone: 44.20.8601.7200
PANDUIT SINGAPORE PTE. LTD.
Republic of Singapore
[email protected]
Phone: 65.6305.7575
PANDUIT JAPAN
Tokyo, Japan
[email protected]
Phone: 81.3.6863.6000
PANDUIT LATIN AMERICA
Guadalajara, Mexico
[email protected]
Phone: 52.33.3777.6000
PANDUIT AUSTRALIA PTY. LTD.
Victoria, Australia
[email protected]
Phone: 61.3.9794.9020
For a copy of Panduit product warranties, log on to www.panduit.com/warranty
For more information
Visit us at www.panduit.com/vspex
Contact Customer Service by email: [email protected]
©2013 Panduit Corp.
ALL RIGHTS RESERVED.
Printed in the U.S.A.
CQSEMCSC6079
7/2013