Panduit Pre-Configured Physical Infrastructure VSPEX* 100 VM Cisco-HP Solution CQSEMCMC679 Overview Panduit utilizes extensive converged infrastructure experience in providing the optimal physical infrastructure to support an integrated cloud deployment. Our validated designs include an appropriately-sized dynamic (shippable) cabinet, pre-labeled connectivity bundles, proper grounding, effective thermal and cable management. Panduit evaluates power, thermal and connectivity requirements of each active component. From this, a balanced and scalable rack elevation is created, integrated port-to-port network map is established, CFD analysis is conducted, and proper load balancing is calculated. Pre-assembled and kitted solutions provide significant time savings, reduced risk and lowest TCO throughout procurement, installation, and upgrade phases. This 100 virtual machines (VM) solution features a pre-engineered solution that arrives ready for rapid and reliable deployment. Technical Information Connectivity for VSPEX* 100 VM See Reverse for Details 2 switches (Cisco 3048) 4 servers (designed for most IBM, HP, Dell 1 RU servers) Dual disk controller (EMC 3300) No Disruption Expansion Up to 6 total servers Up to 8 total DAE’s with optional additional backup devices Cabinet 600 x 1200 42 RU on dynamic shippable shock pallet 79.8"H x 23.6"W x 48.0"D (2026mm x 600mm x 1219mm) Packaged cabinet height: 85 in. (215.9 cm) Always follow active equipment manufacturer’s recommended installation practices Detailed Installation Guide Step-by-step assembly Elevations Port-to-port mapping by device labeled cables grouped by device with specific, easy to follow guide Other VM Solutions Available VSPEX* 50 VM Solution for Cisco-HP in 600x1070 Dynamic Cabinet CQSEMCSC6079 VSPEX* 125 VM Solution for Cisco-HP in 600x1200 Dynamic Cabinet CQSEMCMPC679 VSPEX* 250 VM Solution for Cisco-HP in 600x1200 Dynamic Cabinet CQSEMCLC679 These solutions can be ordered through EMC* Select (http://www.emc.com/select) *EMC and VSPEX are Registered Trademarks of EMC Corporation. w w w. pa n d u it.c o m Panduit Pre-Configured Physical Infrastructure for VSPEX* 100 VM Cisco-HP Solution Key Features and Benefits Dynamic cabinet Allows for shipment of installed equipment Single Cabinet 600 x 1200 – 42 RU Side panels, casters, shock pallet and ramp Always follow active equipment manufacturer’s recommended installation practices Connectivity package Port-to-port labeling reduces installation time while following industry best practices for network device connectivity Redundant shielded copper cables for switch to data processor connectivity (7) Shielded copper cables per server to switch connectivity, including management Shielded copper switch interconnect cables Does not include EMC supplied interconnect cables Thermal solutions Ensures improved airflow to the switch for optimal thermal temperatures and promotes hot/cold aisle segregation Validated thermal solution Customer patch panel Allows flexible connectivity of equipment to customer network (1) 48-port panel Refer to patch panel section below in recommended accessories Grounding and bonding Cable management Features components to ensure best practices for grounding equipment; each system includes cabinet to facility ground and paint piercing grounding cage nuts from equipment to cabinet (2) 10 AWG whips for DPE and (2) 6 AWG whips for discrete ground of switches Ensures cable routing and management best practices while improving cabinet airflow Fingers at every RU (1) ESD wrist strap for end user Panduit part number: CQSEMCMC679 (VSPEX* 100 VM Cisco-HP solution) active gear not included D-ring cable manager at switches Recommended Accessories (Ordered Separately) Customer Patch Panel Components – A network interface panel is included in each Panduit Pre-Configured Physical Infrastructure Solution configuration to facilitate connection to the existing data center infrastructure. Panduit offers a variety of QuickNet™ Patch Panel accessories to allow connection of multiple media types (copper and fiber) in a variety of termination methods (pre-terminated cassettes, Mini-Com® Modules and/or field termination) providing scalability and flexibility for changing network requirements. See more details on QuickNet™ Patch Panels at www.panduit.com. Power Outlet Units (POU) – Panduit vertical power strips offer a convenient way to distribute power to active equipment within racks and cabinets. Panduit recommends the following POU options which are sized to support this configuration with full redundancy: QZ1B1L2BN30P1 USA 208 V, 30 A, single-phase, (2) 20 A 2 pole breakers (1-C19, 4-C13 x 6) Qty. 2 QZ1B1L2BN30P1J Japan 200 V, 30 A, single-phase, (2) 20 A 2 pole breakers (1-C19, 4-C13 x 6) Qty. 2 QZ1D2B2BM30P1 Europe/Korea 230 V, 32 A, single-phase, (2) 20 A 2 pole breakers (1-C19, 4-C13 x 6) Qty. 2 QZ1B1N3BN30P1 USA 208 V, 30 A, 3-phase delta, (3) 20 A 2 pole breakers (1-C19, 4-C13 x 6) Qty. 2 QZ1D2P6BM30P1 Europe/Korea/ 230 V, 32 A, 3-phase wye, (6) 16 A single pole breakers (1-C19, 4-C13 x 6) Australia/Russia Qty. 2 QZ1B1N3BN30P1J Japan Qty. 2 200 V, 30 A, 3-phase delta (24) C-13 and (6) C-19 networked (3) 20 A 2 pole breakers *EMC and VSPEX are Registered Trademarks of EMC Corporation. WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT CANADA Markham, Ontario [email protected] Phone: 800.777.3300 PANDUIT EUROPE LTD. London, UK [email protected] Phone: 44.20.8601.7200 PANDUIT SINGAPORE PTE. LTD. Republic of Singapore [email protected] Phone: 65.6305.7575 PANDUIT JAPAN Tokyo, Japan [email protected] Phone: 81.3.6863.6000 PANDUIT LATIN AMERICA Guadalajara, Mexico [email protected] Phone: 52.33.3777.6000 PANDUIT AUSTRALIA PTY. LTD. Victoria, Australia [email protected] Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty For more information Visit us at www.panduit.com/vspex Contact Customer Service by email: [email protected] ©2013 Panduit Corp. ALL RIGHTS RESERVED. Printed in the U.S.A. CQSEMCMC679 7/2013