P OWER TRANS FOR MER Chassis Mount: Single Secondary F-3112X Electrical Specifications (@25C) 1. Maximum Power: 3.5 VA 2. Primary: Series: 230V 50/60 Hz Parallel: 115V 50/60 Hz 3. Secondary: 14.0VCT @ 0.25 Amps 4. Voltage Regulation: 30 % TYP @ full load to no load 5. Temperature Rise: 35C TYP (45C MAX allowed) Description: The F-3112X is part of a series which has a long history of reliable service in the field, made from a proven design and constructed with UL recognized materials. A Construction: Wound on a single channel nylon bobbin. Materials are UL recognized, Class B (130º C) rated. Safety: BLK/GRN These products are 100% hipot tested with an insulation of 1500V between primary and secondary windings as well as between the primary / secondary windings and the core. RED/BLK YEL/BLK BLK Dimensions: Units: In inches A B C D 1.375 2.375 1.50 2.00 C Mounting Hole Diameter: .187 in Lead length: 7.0 inches + 1 inch Weight: 0.30 lbs Schematic: BLK GRN B YEL/BLK RED/BLK D GRN/YEL GRN BLK/GRN Primary: Series: Jumper YEL/BLK to RED/BLK, apply between BLK and BLK/GRN Parallel: Jumper BLK to RED/BLK and YEL/BLK to BLK/GRN, apply between BLK and BLK/GRN GRN GRN/YEL Secondary: Green to Green GRN RoHS Compliance: As of manufacturing date February 2005, all standard products meet the requirements of 2011/65/EU, known as the RoHS initiative. * Upon printing, this document is considered “uncontrolled”. Please contact Triad Magnetics’ website for the most current version. Web: www.TriadMagnetics.com Phone 951-277-0757 Fax 951-277-2757 460 Harley Knox Blvd. Perris, California 92571 Publish Date: December 4, 2013