UNISONIC TECHNOLOGIES CO., LTD DTC144E NPN SILICON TRANSISTOR NPN DIGITAL TRANSISTOR (BUILT- IN BIAS RESISTORS) FEATURES * Built-in bias resistors that implies easy ON/OFF applications. * The bias resistors are thin-film resistors with complete isolation to allow negative input. EQUIVALENT CIRCUIT ORDERING INFORMATION Ordering Number Lead Free Halogen Free DTC144EG-AE3-R DTC144EG-AL3-R DTC144EG-AN3-R DTC144EL-T92-B DTC144EG-T92-B DTC144EL-T92-K DTC144EG-T92-K DTC144EL-T9S-B DTC144EG-T9S-B DTC144EL-T9S-K DTC144EG-T9S-K Note: Pin Assignment: G: GND I: IN O: OUT Package SOT-23 SOT-323 SOT-523 TO-92 TO-92 TO-92SP TO-92SP Pin Assignment 1 2 3 G I O G I O G I O G O I G O I G O I G O I Packing Tape Reel Tape Reel Tape Reel Tape Box Bulk Tape Box Bulk MARKING SOT-23 / SOT-323 / SOT-523 TO-92 www.unisonic.com.tw Copyright © 2014 Unisonic Technologies Co., Ltd TO-92SP 1of 3 QW-R206-050.G DTC144E NPN SILICON TRANSISTOR ABSOLUTE MAXIMUM RATINGS (TA= 25°C, unless otherwise specified) PARAMETER Supply Voltage Input Voltage RATINGS UNIT 50 V -10 ~ +40 V 30 mA Output Current 100 mA TO-92SP 550 TO-92 625 Power Dissipation PD mW SOT-523 150 SOT-23/SOT-323 200 Junction Temperature TJ +150 °C Storage Temperature TSTG -55~+150 °C Note Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. SYMBOL VCC VIN IOUT IOUT(MAX) ELECTRICAL CHARACTERISTICS (TA= 25°C, unless otherwise specified) PARAMETER Input Voltage Output Voltage Input Current Output Current DC Current Gain Input Resistance Resistance Ratio Transition Frequency SYMBOL VIN(OFF) VIN(ON) VOUT(ON) IIN IOUT(OFF) hFE R1 R2/R1 fT TEST CONDITIONS VCC= 5V, IOUT=100μA VOUT= 0.3V, IOUT= 20mA IOUT/IIN= 10mA / 0.5mA VIN= 5V VCC= 50V , VIN=0V VOUT= 5V, IOUT= 5mA VCE= 10V, IE= -5mA, f=100MHz UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN TYP MAX UNIT 0.5 V 0.1 0.3 0.18 0.5 V mA μA 47 1 250 61.1 1.2 kΩ 3 68 32.9 0.8 MHz 2 of 3 QW-R206-050.G DTC144E NPN SILICON TRANSISTOR TYPICAL CHARACTERISTICS ■ Input Voltage vs. Output Current (ON Characterristics) 100 Output Current vs. Input Voltage (OFF Characterristics) 10 VOUT=0.3V Vcc=5V 5 50 TA=100℃ 25℃ -40℃ Output Current, IOUT (mA) Input Voltage, VIN(ON) (V) 2 20 10 TA=-40℃ 25℃ 100℃ 5 2 1 500m 1 0.5 0.2 0.1 0.05 0.02 0.01 0.005 200m 0.002 100m 0.1 0.2 0.5 1 2 5 10 20 50 0.001 100 0 1000 VOUT=5V Output Voltage, VOUT(ON) (mV) DC Current Gain, hFE 3.0 IOUT/IIN=20 500 TA=100℃ 25℃ -40℃ 100 2.5 Output Voltage vs. Output Current 1k 200 2.0 1.5 Input Voltage, VIN(OFF) (V) DC Current Gain vs. Output Current 500 1.0 0.5 Output Current: IOUT (mA) 50 20 10 5 200 TA=100℃ 25℃ -40℃ 100 50 20 10 5 2 2 1 1 0.1 0.2 0.5 1 2 5 10 20 50 100 Output Current, IOUT (mA) 0.1 0.2 0.5 1 2 5 10 20 50 100 Output Current, IOUT (mA) UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R206-050.G