Suntan ALUMINUM ELECTROLYTIC CAPACITORS ® C H IP TYPE S ER IE S FEATU R E S TS13C2 ‧ Bi-polar with general temperature+ 85℃ ‧ Load life of 1000 hours Bi-Polarized Series Specifications I T E M S P E R F O R M A N C E C H A R A C T E R I S T I C S Operating Temperature Range Voltage Range Capacitance Range Capacitance Tolerance Leakage Current -40℃ ~ +85℃ 6.3~50V 0.1~100μF ±20% at 120Hz, 20℃ leakage current≤0.005CV or10μA, whichever is greater(after 2 minutes’ application of rated voltage) Dissipation Factor (Tan δ) Measurement frequency : 120Hz, Temperature : 20℃ Rated voltage (V) 6.3 10 Tan δ (MAX) 0.24 0.20 Stability at Low Temperature Measurement frequency : 120Hz Rated voltage (V) Impedance ratio Z(-25℃ )/ Z(20℃) ZT / Z20 (MAX) Z(-40℃) / Z(20℃) Load Life After 1000 hours application of rated voltage at 85℃ (the polarity needs to exchange every 250 hours), capacitors meet the characteristics listed at right. Self Life After leaving capacitors under no load at 85℃ for 1000 hours, they meet the specified value for load life characteristics listed above. Resistance to Soldering Heat After reflow soldering restored at room temperature, they meet the characteristics listed at right. 16,25 0.17 6.3 4 8 10 3 6 Capacitance Change Dissipation Factor Leakage Current Capacitance Change Dissipation Factor Leakage Current 35,50 0.15 16,25 2 4 35,50 2 3 Within ± 20% of initial value 200% or less of initial specified value Initial specified value or less Within ± 10% of initial value Initial specified value or less Initial specified value or less DRAWING(Unit:mm) *1 Voltage mark for 6.3V is [6V] *2 Applicable to Ø6.3*7.7 DIMENSIONS(Unit:mm) ØDxL A B C E±0.2 L 4x5.4 2.0 4.3 4.3 1.0 5.4 5x5.4 2.2 5.3 5.3 1.4 5.4 Suntan® Technology Company Limited 6.3x5.4 2.6 6.6 6.6 1.9 5.4 6.3x7.7 2.6 6.6 6.6 1.9 7.7 Website: www.suntan.com.hk Email: [email protected] Tel: (852) 8202 8782 Fax: (852) 8208 6246 Suntan ALUMINUM ELECTROLYTIC CAPACITORS ® TS13C2 DIMENSIONS&MAXIMUM PERMISSIBLE RIPPLE CURRENT WV/V Cap/μF 6.3 10 16 25 35 50 0J 1A 1C 1E 1V 1H 0.1 0R1 -- -- -- -- -- -- -- -- -- -- 4×5.4 1.0 0.22 R22 -- -- -- -- -- -- -- -- -- -- 4×5.4 2.0 0.33 R33 -- -- -- -- -- -- -- -- -- -- 4×5.4 2.8 0.47 R47 -- -- -- -- -- -- -- -- -- -- 4×5.4 4.0 1 010 -- -- -- -- -- -- -- -- -- -- 4×5.4 8.4 2.2 2R2 -- -- -- -- -- -- -- -- 4×5.4 8.4 5×5.4 13 3.3 3R3 -- -- -- -- -- -- 5×5.4 12 5×5.4 16 5×5.4 17 4.7 4R7 -- -- -- -- 4×5.4 12 5×5.4 16 5×5.4 18 6.3×5.4 20 10 100 -- -- 4×5.4 17 5×5.4 23 6.3×5.4 27 6.3×5.4 29 6.3×7.7 36 22 220 5×5.4 28 6.3×5.4 33 6.3×5.4 37 6.3×7.7 50 6.3×7.7 54 -- -- 33 330 6.3×5.4 37 6.3×5.4 41 6.3×5.4 49 6.3×7.7 61 -- -- -- -- 47 470 6.3×5.4 45 6.3×7.7 61 6.3×7.7 75 -- -- -- -- -- -- 100 101 6.3×7.7 82 6.3×7.7 85 -- -- -- -- -- -- Case Allowable size ripple Case Size ØD×L(mm),ripple current(mA rms) at 85℃ 120Hz Frequency coefficient of allowable ripple current Frequency 50Hz 120Hz 300Hz 1kHz 10kHz~ Coefficient 0.70 1.00 1.17 1.36 1.50 Note: Specification are subject to change without notice. For more detail and update, please visit our website. Suntan® Technology Company Limited Website: www.suntan.com.hk Email: [email protected] Tel: (852) 8202 8782 Fax: (852) 8208 6246