Direct-to-Liquid Systems (DL) Direct-to-Liquid Assemblies cool or heat objects attached directly to the cold plate. Heat is dissipated into a liquid heat exchanger on the hot side. The liquid circuit is normally a re-circulating type that requires a pump and additional liquid heat exchanger that dissipates heat into the ambient environment. Specifications apply to the warm side liquid temperature of 32°C and nominal voltage with tolerances ±10%. Lw Ww 30 2xRP ⅛“x10 Hw Hc Lc PART NO. DL-060-12-00-00 DL-120-24-00-00 DL-210-24-00-00 Wc COOLING POWER (W) NOMINAL VOLTAGE (V) CURRENT (A) WEIGHT (kg) Lw Lc DIMENSIONS (mm) Ww Wc 59 122 207 12 24 24 4.2 4.2 8.1 0.4 0.7 1.3 100 140 240 60 120 120 60 60 60 60 60 60 Hw Hc 15 15 15 24 24 24 WWW.LAIRDTECH.COM