Datasheet

DIN Socket Sequence Connectors
XC7
An improved DIN-standard Sequence
Connector
■ Allows power line to daughter board connection
first and removal last.
■ Used the same way as regular DIN connectors.
Dimensions are those of DIN B-type and C-type
connectors. Mated length is 4 mm. All contacts
are sequential contacts, an improvement on standard connectors.
■ Sockets are equipped with 1-mm long sequential
contacts. Sockets can be stacked up to 2 levels,
and Plugs can be stacked up to 3 levels.
■ Uses a double-sided contact design. Gold/palla-
dium plating has an insertion durability of 5,000
cycles.
Note:
Cannot be mated with XC5 and XC6 Series.
RoHS Compliant
■ Connectors
Model
Appearance
Page
XC7A
XC7B
XC7C
XC7D
Plug with
right-angle
terminals
Socket with
straight terminals
Plug with
right-angle
terminals
Socket with
straight terminals
2
3
4
■ Ratings and Characteristics
5
■ Materials and Finish
Rated current
2A
Item
Plugs
Rated voltage
300 VAC
Housings
Contact resistance
20 mΩ max. (at 20 mV, 100 mA max.)
Fiber-glass reinforced PBT resin (UL94V0)/gray
Contacts Mating
end
Brass/nickel base, Phosphor-bronze/
gold/palladium plat- nickel base, gold/
ing
palladium plating
Insulation resistance 106 MΩ min. (at 100 VDC)
Dielectric strength
1,000 VAC for 1 min (leakage current:
1 mA max.)
Total insertion force
1 N max. per contact
Removal force
0.2 N min. (with test gauge, t = 0.56 mm)
Insertion durability
5,000 times
Ambient operating
temperature
Operating: −55 to 125°C (with no icing)
Terminal
Brass/nickel base,
gold flash plating
Sockets
Phosphor-bronze/
nickel base, gold
flash plating
1
XC7A Double-row Plugs
■ Dimensions
(unit: mm)
XC7A-@@42-@@@@
(With right-angle DIP terminals)
Two, 2.8 dia.
*Sequential contacts
Mounting holes (bottom view)
0.8 +0.1
dia.
0
Two, 2.8 dia.
Dimensions
No. of
contacts
Dimensions (mm)
A
B
D
E
64
93.8
88.0
78.74
C
88.9
83.9
85.2
90
126.8
121.0
111.76
121.9
117.0
118.2
100
139.5
133.7
124.46
134.6
129.7
130.9
■ Ordering Information
Appearance
No. of contacts
Terminal type
Sequential contact position
Model
64
Right-angle DIP ter- None
minals
All
XC7A-6442
90
None
XC7A-9042
100
2
XC7A-6442-N001
All
XC7A-9042-N001
None
XC7A-0142
All
XC7A-0142-N001
DIN Socket Sequence Connectors XC7
F