Datasheet

SS
Subminiature Basic Switch
Subminiature Basic Switch
Offers High Reliability and
Security
● The OMRON's best-selling micro switches of a
wide variety from 0.1A to 10.1A.
● A variety of models are available, with operating
force ranging from low to high.
● Two split springs ensure a high stability and
durability of 30,000,000 operations.
S
S
RoHS Compliant
Model Number Legend
1
SS-@
1. Ratings
10 : 250 VAC 10.1A
5 : 125 VAC 5 A
01 : 30 VDC 0.1A
2 @
3 @
4 @
5 @
6
@
4. Contact form
None : SPDT
-2 : SPST-NC
-3 : SPST-NO
2. Actuator
5. Terminals
None : Pin plunger
None : Solder terminals
GL : Hinge lever
T : Quick-connect terminals (#110)
GL111 : Long hinge lever
D : PCB terminals
GL13 : Simulated roller lever
6. Heat resistance
GL2 : Hinge roller lever
None : Standard (85°C)
GL02 : Hinge roller lever
-T : Heat-resistant (120°C)
(Roller material: Stainless) heat-resistant
3. Maximum Operating Force (OF)
None : 1.47 N {150 gf}
Note. These values are for the pin plunger models.
-F : 0.49 N {50 gf} (0.1 A, 5 A)
-E : 0.25 N {25 gf} (0.1 A)
List of Models
●Standard Models
Actuator
Terminals
Solder terminals
Quick-connect
terminals (#110)
PCB terminals
Solder terminals
Pin plunger
Quick-connect
terminals (#110)
PCB terminals
Solder terminals
Quick-connect
terminals (#110)
PCB terminals
Ratings
Contact Form Maximum Operating Force (OF)
SPDT
SPST-NC
SPST-NO
SPDT
SPST-NC
1.47 N {150 gf}
SPST-NO
SPDT
SPST-NC
SPST-NO
SPDT
SPST-NC
SPST-NO
SPDT
SPST-NC
0.49 N {50 gf}
SPST-NO
SPDT
SPST-NC
SPST-NO
SPDT
SPST-NC
SPST-NO
SPDT
SPST-NC
0.25 N {25 gf}
SPST-NO
SPDT
SPST-NC
SPST-NO
Separator (Sold Separately), Terminal Connector (Sold Separately)
10.1 A
5A
0.1 A
SS-10
SS-10-2
SS-10-3
SS-10T
SS-10-2T
SS-10-3T
SS-10D
SS-10-2D
SS-10-3D
-
SS-5
SS-5-2
SS-5-3
SS-5T
SS-5-2T
SS-5-3T
SS-5D
SS-5-2D
SS-5-3D
SS-5-F
SS-5-F-2
SS-5-F-3
SS-5-FT
SS-5-F-2T
SS-5-F-3T
SS-5-FD
SS-5-F-2D
SS-5-F-3D
-
SS-01
SS-01-2
SS-01-3
SS-01T
SS-01-2T
SS-01-3T
SS-01D
SS-01-2D
SS-01-3D
SS-01-F
SS-01-F-2
SS-01-F-3
SS-01-FT
SS-01-F-2T
SS-01-F-3T
SS-01-FD
SS-01-F-2D
SS-01-F-3D
SS-01-E
SS-01-E-2
SS-01-E-3
SS-01-ET
SS-01-E-2T
SS-01-E-3T
SS-01-ED
SS-01-E-2D
SS-01-E-3D
Refer to "Basic Switch Common Accessories"
1
SS
Subminiature Basic Switch
Actuator
Terminals
Solder terminals
Quick-connect
terminals (#110)
PCB terminals
Solder terminals
S
S
Hinge lever
Quick-connect
terminals (#110)
PCB terminals
Solder terminals
Quick-connect
terminals (#110)
PCB terminals
Solder terminals
Quick-connect
terminals (#110)
PCB terminals
Solder terminals
Long hinge lever
Quick-connect
terminals (#110)
PCB terminals
Solder terminals
Quick-connect
terminals (#110)
PCB terminals
Solder terminals
Quick-connect
terminals (#110)
PCB terminals
Solder terminals
Simulated roller lever
Quick-connect
terminals (#110)
PCB terminals
Solder terminals
Quick-connect
terminals (#110)
PCB terminals
Contact Form
SPDT
SPST-NC
SPST-NO
SPDT
SPST-NC
SPST-NO
SPDT
SPST-NC
SPST-NO
SPDT
SPST-NC
SPST-NO
SPDT
SPST-NC
SPST-NO
SPDT
SPST-NC
SPST-NO
SPDT
SPST-NC
SPST-NO
SPDT
SPST-NC
SPST-NO
SPDT
SPST-NC
SPST-NO
SPDT
SPST-NC
SPST-NO
SPDT
SPST-NC
SPST-NO
SPDT
SPST-NC
SPST-NO
SPDT
SPST-NC
SPST-NO
SPDT
SPST-NC
SPST-NO
SPDT
SPST-NC
SPST-NO
SPDT
SPST-NC
SPST-NO
SPDT
SPST-NC
SPST-NO
SPDT
SPST-NC
SPST-NO
SPDT
SPST-NC
SPST-NO
SPDT
SPST-NC
SPST-NO
SPDT
SPST-NC
SPST-NO
SPDT
SPST-NC
SPST-NO
SPDT
SPST-NC
SPST-NO
SPDT
SPST-NC
SPST-NO
SPDT
SPST-NC
SPST-NO
SPDT
SPST-NC
SPST-NO
SPDT
SPST-NC
SPST-NO
Ratings
Maximum Operating Force (OF)
0.49 N {50 gf}
0.16 N {16 gf}
0.08 N {8 gf}
0.39 N {40 gf}
0.12 N {12 gf}
0.06 N {6 gf}
0.49 N {50 gf}
0.16 N {16 gf}
0.08 N {8 gf}
Separator (Sold Separately), Terminal Connector (Sold Separately)
2
10.1 A
5A
0.1 A
SS-10GL
SS-10GL-2
SS-10GL-3
SS-10GLT
SS-10GL-2T
SS-10GL-3T
SS-10GLD
SS-10GL-2D
SS-10GL-3D
SS-10GL111
SS-10GL111-2
SS-10GL111-3
SS-10GL111T
SS-10GL111-2T
SS-10GL111-3T
SS-10GL111D
SS-10GL111-2D
SS-10GL111-3D
SS-10GL13
SS-10GL13-2
SS-10GL13-3
SS-10GL13T
SS-10GL13-2T
SS-10GL13-3T
SS-10GL13D
SS-10GL13-2D
SS-10GL13-3D
-
SS-5GL
SS-5GL-2
SS-5GL-3
SS-5GLT
SS-5GL-2T
SS-5GL-3T
SS-5GLD
SS-5GL-2D
SS-5GL-3D
SS-5GL-F
SS-5GL-F-2
SS-5GL-F-3
SS-5GL-FT
SS-5GL-F-2T
SS-5GL-F-3T
SS-5GL-FD
SS-5GL-F-2D
SS-5GL-F-3D
SS-5GL111
SS-5GL111-2
SS-5GL111-3
SS-5GL111T
SS-5GL111-2T
SS-5GL111-3T
SS-5GL111D
SS-5GL111-2D
SS-5GL111-3D
SS-5GL111-F
SS-5GL111-F-2
SS-5GL111-F-3
SS-5GL111-FT
SS-5GL111-F-2T
SS-5GL111-F-3T
SS-5GL111-FD
SS-5GL111-F-2D
SS-5GL111-F-3D
SS-5GL13
SS-5GL13-2
SS-5GL13-3
SS-5GL13T
SS-5GL13-2T
SS-5GL13-3T
SS-5GL13D
SS-5GL13-2D
SS-5GL13-3D
SS-5GL13-F
SS-5GL13-F-2
SS-5GL13-F-3
SS-5GL13-FT
SS-5GL13-F-2T
SS-5GL13-F-3T
SS-5GL13-FD
SS-5GL13-F-2D
SS-5GL13-F-3D
-
SS-01GL
SS-01GL-2
SS-01GL-3
SS-01GLT
SS-01GL-2T
SS-01GL-3T
SS-01GLD
SS-01GL-2D
SS-01GL-3D
SS-01GL-F
SS-01GL-F-2
SS-01GL-F-3
SS-01GL-FT
SS-01GL-F-2T
SS-01GL-F-3T
SS-01GL-FD
SS-01GL-F-2D
SS-01GL-F-3D
SS-01GL-E
SS-01GL-E-2
SS-01GL-E-3
SS-01GL-ET
SS-01GL-E-2T
SS-01GL-E-3T
SS-01GL-ED
SS-01GL-E-2D
SS-01GL-E-3D
SS-01GL111
SS-01GL111-2
SS-01GL111-3
SS-01GL111T
SS-01GL111-2T
SS-01GL111-3T
SS-01GL111D
SS-01GL111-2D
SS-01GL111-3D
SS-01GL111-F
SS-01GL111-F-2
SS-01GL111-F-3
SS-01GL111-FT
SS-01GL111-F-2T
SS-01GL111-F-3T
SS-01GL111FD
SS-01GL111-F-2D
SS-01GL111-F-3D
SS-01GL111-E
SS-01GL111-E-2
SS-01GL111-E-3
SS-01GL111-ET
SS-01GL111-E-2T
SS-01GL111-E-3T
SS-01GL111-ED
SS-01GL111-E-2D
SS-01GL111-E-3D
SS-01GL13
SS-01GL13-2
SS-01GL13-3
SS-01GL13T
SS-01GL13-2T
SS-01GL13-3T
SS-01GL13D
SS-01GL13-2D
SS-01GL13-3D
SS-01GL13-F
SS-01GL13-F-2
SS-01GL13-F-3
SS-01GL13-FT
SS-01GL13-F-2T
SS-01GL13-F-3T
SS-01GL13-FD
SS-01GL13-F-2D
SS-01GL13-F-3D
SS-01GL13-E
SS-01GL13-E-2
SS-01GL13-E-3
SS-01GL13-ET
SS-01GL13-E-2T
SS-01GL13-E-3T
SS-01GL13-ED
SS-01GL13-E-2D
SS-01GL13-E-3D
Refer to "Basic Switch Common Accessories"
SS
Subminiature Basic Switch
Actuator
Terminals
Solder terminals
Quick-connect
terminals (#110)
PCB terminals
Solder terminals
Hinge roller lever
Quick-connect
terminals (#110)
PCB terminals
Solder terminals
Quick-connect
terminals (#110)
PCB terminals
Ratings
Contact Form Maximum Operating Force (OF)
SPDT
SPST-NC
SPST-NO
SPDT
SPST-NC
0.49 N {50 gf}
SPST-NO
SPDT
SPST-NC
SPST-NO
SPDT
SPST-NC
SPST-NO
SPDT
SPST-NC
0.16 N {16 gf}
SPST-NO
SPDT
SPST-NC
SPST-NO
SPDT
SPST-NC
SPST-NO
SPDT
SPST-NC
0.08 N {8 gf}
SPST-NO
SPDT
SPST-NC
SPST-NO
10.1 A
5A
0.1 A
SS-10GL2
SS-10GL2-2
SS-10GL2-3
SS-10GL2T
SS-10GL2-2T
SS-10GL2-3T
SS-10GL2D
SS-10GL2-2D
SS-10GL2-3D
-
SS-5GL2
SS-5GL2-2
SS-5GL2-3
SS-5GL2T
SS-5GL2-2T
SS-5GL2-3T
SS-5GL2D
SS-5GL2-2D
SS-5GL2-3D
SS-5GL2-F
SS-5GL2-F-2
SS-5GL2-F-3
SS-5GL2-FT
SS-5GL2-F-2T
SS-5GL2-F-3T
SS-5GL2-FD
SS-5GL2-F-2D
SS-5GL2-F-3D
-
SS-01GL2
SS-01GL2-2
SS-01GL2-3
SS-01GL2T
SS-01GL2-2T
SS-01GL2-3T
SS-01GL2D
SS-01GL2-2D
SS-01GL2-3D
SS-01GL2-F
SS-01GL2-F-2
SS-01GL2-F-3
SS-01GL2-FT
SS-01GL2-F-2T
SS-01GL2-F-3T
SS-01GL2-FD
SS-01GL2-F-2D
SS-01GL2-F-3D
SS-01GL2-E
SS-01GL2-E-2
SS-01GL2-E-3
SS-01GL2-ET
SS-01GL2-E-2T
SS-01GL2-E-3T
SS-01GL2-ED
SS-01GL2-E-2D
SS-01GL2-E-3D
10.1 A
5A
0.1 A
●Heat Resistant Models
Actuator
Pin plunger
Hinge lever
Long hinge lever
Simulated roller
lever
Hinge roller lever
(Roller material:
stainless steel)
Terminals
Solder terminals
Quick-connect
terminals (#110)
PCB terminals
Solder terminals
Quick-connect
terminals (#110)
PCB terminals
Solder terminals
Quick-connect
terminals (#110)
PCB terminals
Solder terminals
Quick-connect
terminals (#110)
PCB terminals
Solder terminals
Quick-connect
terminals (#110)
PCB terminals
Ratings
Contact Form Maximum Operating Force (OF)
1.47 N {150 gf}
0.49 N {50 gf}
SPDT
0.39 N {40 gf}
0.49 N {50 gf}
0.49 N {50 gf}
Contact Form
●SPDT
SS-10-T
SS-5-T
SS-01-T
SS-10T-T
SS-5T-T
SS-01T-T
SS-10D-T
SS-10GL-T
SS-5D-T
SS-5GL-T
SS-01D-T
SS-01GL-T
SS-10GLT-T
SS-5GLT-T
SS-01GLT-T
SS-10GLD-T
SS-10GL111-T
SS-5GLD-T
SS-5GL111-T
SS-01GLD-T
SS-01GL111-T
SS-10GL111T-T
SS-5GL111T-T
SS-01GL111T-T
SS-10GL111D-T
SS-10GL13-T
SS-5GL111D-T
SS-5GL13-T
SS-01GL111D-T
SS-01GL13-T
SS-10GL13T-T
SS-5GL13T-T
SS-01GL13T-T
SS-10GL13D-T
SS-10GL02-T
SS-5GL13D-T
SS-5GL02-T
SS-01GL13D-T
SS-01GL02-T
SS-10GL02T-T
SS-5GL02T-T
SS-01GL02T-T
SS-10GL02D-T
SS-5GL02D-T
SS-01GL02D-T
Contact Specifications
●SPST-NC
●SPST-NO
Item
Model SS-10 models SS-5 models SS-01 models
Specification
Contact
Material
Gap (standard value)
COM
NO NC
COM
NC
COM
Inrush
current
NO
NC
NO
Minimum applicable load
(reference value)*
*
Rivet
Silver alloy
Crossbar
Silver
Gold alloy
0.5 mm
0.25 mm
20 A max.
1 A max.
15 A max.
10 A max.
5 VDC 160 mA
1 A max.
5 VDC 1 mA
Please refer to "●Using Micro Loads" in "Precautions" for more
information on the minimum applicable load.
Separator (Sold Separately), Terminal Connector (Sold Separately)
Refer to "Basic Switch Common Accessories"
3
S
S
SS
Subminiature Basic Switch
Ratings
Characteristics
Item
Rated voltage
SS-10 models
250 VAC
10.1 A
SS-5 models
125 VAC
250 VAC
5A
3A
125 VAC
0.1 A
30 VDC
0.1 A
SS-01 models
S
S
Resistive load
Model
Note. The above rating values apply under the
following test conditions.
(1) Ambient temperature: 20±2°C
(2) Ambient humidity: 65±5%
(3) Operating frequency: 30 operations/min
Item
Permissible operating speed
Permissible
operating
frequency
Note. Note that heat resistant models are not
standard approved models.
UL (UL1054)/CSA (CSA C22.2 No.55)
Rated voltage
Model SS-10
SS-5
SS-01
125 VAC
250 VAC
10.1 A
5A
3A
0.1 A
-
30 VDC
-
-
0.1 A
Consult your OMRON sales
representative for specific models
with VDE standard approvals.
VDE (EN61058-1)
Rated voltage
Model
250 VAC
SS-10
SS-5
10 A
5A
Testing conditions: 5E4 (50,000 operations)
T85 (0°C to 85°C)
400 operations/min
Electrical
Contact resistance (initial
value)
60 operations/min
OF 1.47 N models
OF 0.49 N models
OF 0.25 N models
Between terminals of the same
polarity
Dielectric
strength *1
Vibration
resistance *2
SS-10 models
SS-5 models
SS-01 models
0.1 mm to 1 m/s (for pin plunger models)
Mechanical
Insulation resistance
Approved Safety Standards
Models shown in the "List of Models" are
UL and CSA approved models.
Model
100 MΩ min. (at 500 VDC with insulation tester)
30 mΩ max.
50 mΩ max.
50 mΩ max.
100 mΩ max.
150 mΩ max.
600 VAC
1,000 VAC 50/60 Hz for 1 min
50/60 Hz for
1 min
Between current-carrying metal
parts and ground
Between each terminals and noncurrent-carrying metal parts
1,500 VAC 50/60 Hz for 1 min
1,500 VAC 50/60 Hz for 1 min
Malfunction
Durability
Shock
resistance
Malfunction *2
10 to 55 Hz, 1.5 mm double amplitude
OF 1.47 N models
OF 0.49 N models
OF 0.25 N models
OF 1.47 N models
OF 0.49 N models
OF 0.25 N models
Mechanical
Durability *3
Electrical
Degree of protection
Degree of protection against electric shock
Proof tracking index (PTI)
Ambient operating temperature
Ambient operating humidity
Weight
1,000 m/s2 {approx. 100G} max.
500 m/s2 {approx. 50G} max.
500 m/s2 {approx. 50G} max.
300 m/s2 {approx. 30G} max.
200 m/s2 {approx. 20G} max.
200 m/s2 {approx. 20G} max.
10,000,000 operations
30,000,000 operations min.
min.
(60 operations/min)
(60 operations/min)
50,000 operations min.
200,000 operations min.
(30 operations/min)
(30 operations/min)
IEC IP40
Class I
175
-25°C to +85°C (at ambient humidity of 60% max.)
(with no icing or condensation)
85% max. (for +5°C to +35°C)
Approx. 1.6g (pin plunger models)
Note. The data given above are initial values.
*1. The values for dielectric strength shown are for models with a Separator (refer to "Micro Switch
Common Accessories").
*2. The values are at Free Position and Total Travel Position values for pin plunger, and Total Travel
Position value for lever. Close or open circuit of the contact is 1ms max.
*3. For testing conditions, consult your OMRON sales representative.
Terminals/Appearances (Unit: mm)
●Solder terminals
●Quick connect terminals (#110)
2.9
2.9
2.9
3.3
6.4
7.1
1.6
8.8
9.5±0.1
19.8
0.5
7.3
3.2
6.4
●PCB terminals
3-1.6 dia. holes
1.6
8.8
9.5±0.1
19.8
3-1.2
dia. holes
0.5
2.8
7.3
3.2
0.6
10.6
1.6
8.8
9.5±0.1
19.8
0.5
0.5
1.2
7.3
3.2
t=0.5
<PCB Mounting Dimensions (Reference)>
3-1.35~1.5 dia.
(1.6)
8.8+0.15
-0.05
16.1±0.1
Mounting Holes (Unit: mm)
2-2.4 dia. mounting holes
or M2.3 screw holes
9.5±0.1
4
7.0
SS
Subminiature Basic Switch
Dimensions (Unit: mm) and Operating Characteristics
The illustrations and drawings are for solder terminals models.
Refer to "Terminals/Appearances" of the previous page for details on models with quick connect terminals (#110) or PCB terminals.
●Pin plunger
SS-10
SS-5 (-F)
SS-01 (-E, -F)
7.5
PT
3.2
2
A
OP
2.35+0.075
-0.05
9.5 10.2
2.9
6.4
2.5
2.5±0.07 dia.
1.6
2.35+0.075
-0.05 dia.
holes
3.2
6.4
0.5
8.8
5.1 9.5±0.1
19.8
7.3
Model
Operating Characteristics
Operating Force
Releasing Force
OF
RF
Pretravel
PT
Overtravel
OT
Movement Differential MD
Operating Position
●Hinge lever
SS-10GL
SS-5GL (-F)
SS-01GL (-E, -F)
t=0.3*
S
S
3-1.6 dia. holes
SS-10
SS-5
SS-01
Max. 1.47 N {150 gf} 1.47 N {150 gf}
Min. 0.25 N {25 gf} 0.25 N {25 gf}
Max.
Min.
Max.
0.6 mm
0.4 mm
0.12 mm
SS-5-F
SS-01-F
SS-01-E
0.49 N {50 gf}
0.04 N {4 gf}
0.25 N {25 gf}
0.02 N {2 gf}
0.5 mm
0.5 mm
0.1 mm
0.5 mm
0.5 mm
0.1 mm
0.5 mm
0.5 mm
0.1 mm
OP
8.4±0.5 mm
A
14.5
3.6
FP
2.35+0.075
-0.05
9.5 10.2
OP
2.9
6.4
2.5
2.5±0.07 dia.
1.6
2.35+0.075
-0.05
8.8
5.1 9.5±0.1
19.8
dia. holes
3.2
6.4
0.5
7.3
Note. The indicated reference values of RF are for cases
where the lever weight is not applied to the plunger.
* Stainless-steel lever
Model
Operating Characteristics
Operating Force
Releasing Force
●Long hinge lever
SS-10GL111
SS-5GL111 (-F)
SS-01GL111 (-E, -F)
Free Position
Operating Position
Max.
A
22.6
9.5 10.2
C
FP
OP
SS-5GL
SS-01GL
SS-5GL-F
SS-01GL-F
1.0 mm
1.0 mm
1.2 mm
0.8 mm
1.2 mm
0.8 mm
SS-01GL-E
0.08 N {8 gf}
0.01 N {1 gf}
(reference value)
1.2 mm
0.8 mm
13.6 mm
8.8±0.8 mm
3.6
FP
OP
NC
NO
SS-10GL
Max. 0.49 N {50 gf} 0.49 N {50 gf} 0.16 N {16 gf}
Min. 0.06 N {6 gf} 0.06 N {6 gf} 0.02 N {2 gf}
Min.
Max.
2.35+0.075
-0.05
2.9
OF
RF
Overtravel
OT
Movement Differential MD
t=0.3*
3-1.6 dia. holes
6.4
2.5
2.35+0.075
-0.05 dia. holes
2.5±0.07 dia.
1.6
8.8
5.1 9.5±0.1
19.8
3.2
6.4
0.5
7.3
Note. The indicated reference values of RF are for cases
where the lever weight is not applied to the plunger.
* Stainless-steel lever
Model
Operating Characteristics
Operating Force
Releasing Force
3-1.6 dia. holes
OF
RF
SS-10GL111
Max. 0.39 N {40 gf}
Min.
0.03 N {3 gf}
Overtravel
OT
Movement Differential MD
Min.
Max.
Free Position
FP
Max.
Operating Position
OP
1.2 mm
1.2 mm
SS-5GL111
SS-5GL111-F
SS-01GL111 SS-01GL111-F
SS-01GL111-E
0.39 N {40 gf}
0.03 N {3 gf}
0.12 N {12 gf}
0.02 N {2 gf}
(reference value)
0.06 N {6 gf}
0.003 N {0.3 gf}
(reference value)
1.2 mm
1.2 mm
1.2 mm
1.2 mm
1.2 mm
1.2 mm
16.8 mm
8.8±1.5 mm
8.8±2 mm
Note 1. Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.
Note 2. The operating characteristics are for operation in the A direction ( ).
5
SS
Subminiature Basic Switch
●Simulated roller lever
SS-10GL13
SS-5GL13 (-F)
SS-01GL13 (-E, -F)
A
15.8
R1.3
t=0.3*
3.6
FP
2.35+0.075
-0.05
OP
9.5 10.2
2.9
6.4
2.5
2.5±0.07 dia.
1.6
S
S
2.35+0.075
-0.05 dia. holes
8.8
5.1 9.5±0.1
19.8
3.2
6.4
0.5
7.3
* Stainless-steel lever
Model
Operating Characteristics
Operating Force
Releasing Force
●Hinge roller lever
SS-10GL2
SS-5GL2 (-F)
SS-01GL2 (-E, -F)
3-1.6 dia. holes
Note. The indicated reference values of RF are for cases
where the lever weight is not applied to the plunger.
SS-10GL13
SS-5GL13
SS-01GL13
SS-5GL13-F
SS-01GL13-F
SS-01GL13-E
OF
RF
Max.
Min.
0.49 N {50 gf}
0.06 N {6 gf}
0.49 N {50 gf}
0.06 N {6 gf}
0.16 N {16 gf}
0.02 N {2 gf}
0.08 N {8 gf}
0.01 N {1 gf}
(reference value)
Overtravel
OT
Movement Differential MD
Min.
Max.
1.0 mm
1.0 mm
1.2 mm
0.8 mm
1.2 mm
0.8 mm
1.2 mm
0.8 mm
Free Position
Operating Position
Max.
FP
OP
A
14.5
15.5 mm
10.7±0.8 mm
*2
4.8x3.2 dia.
t=0.3 * 1
FP
OP
2.35+0.075
-0.05
9.5 10.2
2.9
6.4
2.5
2.5±0.07 dia.
1.6
2.35+0.075
-0.05
8.8
5.1 9.5±0.1
19.8
*1. Stainless-steel lever
*2. Polyacetal resin roller
dia. holes
7.3
Model
Operating Characteristics
Operating Force
Releasing Force
OF
RF
Max.
Min.
Overtravel
OT
Movement Differential MD
Min.
Max.
Free Position
Operating Position
Max.
Note 1. Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.
Note 2. The operating characteristics are for operation in the A direction ( ).
6
3.2
6.4
0.5
FP
OP
3-1.6 dia. holes
Note. The indicated reference values of RF are for cases
where the lever weight is not applied to the plunger.
SS-5GL2
SS-01GL2
SS-5GL2-F
SS-01GL2-F
0.49 N {50 gf}
0.06 N {6 gf}
0.49 N {50 gf}
0.06 N {6 gf}
0.16 N {16 gf}
0.02 N {2 gf}
0.08 N {8 gf}
0.01 N {1 gf}
(reference value)
1.0 mm
1.0 mm
1.2 mm
0.8 mm
1.2 mm
0.8 mm
1.2 mm
0.8 mm
SS-10GL2
19.3mm
14.5±0.8mm
SS-01GL2-E
SS
Subminiature Basic Switch
Precautions
★Please refer to "Common Precautions" for correct use.
Cautions
• Complete the soldering at the iron tip temperature below
350°C within 5 seconds, and do not apply any external force
for 1 minute after soldering. Soldering at an excessively high
temperature or soldering for more than 5 seconds may
deteriorate the characteristics of the Switch.
• Be sure to apply only the minimum required amount of flux.
Switch may have contact failures if flux intrudes into the
interior of the Switch.
• If the PCB terminal models are soldered in the solder bath, flux
will permeate inside the Switch and cause contact failure.
Therefore, manually solder the PCB terminal.
●Mounting
• Use M2.3 mounting screw with plane washers or spring
washers to securely mount the Switch. Tighten the screws to a
torque of 0.23 to 0.26 N·m {2.3 to 2.7 kgf·cm}.
• Mount the Switch onto a flat surface. Mounting on an uneven
surface may cause deformation of the Switch, resulting in
faulty operation or breakage in the housing.
●Using Micro Loads
Using a model for ordinary loads to open or close the contact of
a micro load circuit may result in faulty contact. Use models that
operate in the following range. However, even when using micro
load models within the following operating range, if inrush
current occurs when the contact is opened or closed, it may
increase the contact wear and so decrease durability. Therefore,
insert a contact protection circuit where necessary. The N-level
reference value applies for the minimum applicable load. This
value indicates the malfunction reference level for the reliability
level of 60% (λ60).
(JIS C5003)
The equation, λ60=0.5×10-6/operation indicates that the
1
estimated malfunction rate is less than 2,000,000 operations with
a reliability level of 60%.
Voltage (V)
●Soldering
Correct Use
30
0.16mA
26 mA
100 mA
24
Operating range for
micro-load model
SS-01
Operating
range for
general-load
models
SS-5
SS-10
12
5
1 mA
100 mA 160mA
0
0.1
1
10
100
1,000
Current (mA)
7
S
S
SS
Subminiature Basic Switch
S
S
• Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product.
• Consult your OMRON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad
systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious
influence on lives and property if used improperly. Make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or
equipment, and be sure to provide the system or equipment with double safety mechanisms.
Note: Do not use this document to operate the Unit.
OMRON Corporation
ELECTRONIC AND MECHANICAL COMPONENTS COMPANY
8
Contact: www.omron.com/ecb
Cat. No.B032-E1-13
0812(0207)(O)