D & F Series Crystal HC-49/S SMD Crystal 3rd Lead Ground Option Available Wide Frequency Range Fundamental or 3rd OT AT Cut Frequency Range 3.200MHz to 80.000MHz Frequency Tolerance / Stability (See Part Number Guide for Options) Operating Temperature Range (See Part Number Guide for Options) Storage Temperature -55°C to +125°C Aging ±5ppm / first year Max Shunt Capacitance 7pF Max Load Capacitance 20pF Standard (See Part Number Guide for Options) Equivalent Series Resistance See ESR Chart Mode of Operation See ESR Chart Drive Level 1mW Max Environmental & Mechanical Detail Shock MIL-STD-883, Method 2002 Cond B Solderability MIL-STD-883, Method 2003 Solvent Resistance MIL-STD-202, Method 215 Vibration MIL-STD-883, Method 2007, Cond A Gross Leak Test MIL-STD-883, Method 1014, Cond C Fine Leak Test MIL-STD-883, Method 1014, Cond A2 MSL Level 1 per IPC/JEDEC J-STD 20 Marking Detail Line 1: MXX.XXX XX.XXX = Frequency in MHz Line 2: SYMCCL S = Internal Code YM = Date Code (Year/Month) CC = Crystal Parameters Code L = Denotes RoHS Compliant MMD MONITOR/QUARTZEK – An ILSI Company, 5458 Louie Lane, Reno, NV 89511 Phone: (775) 851-8880, www.mmdcomp.com Revision: Specifications are subject to change without notice. 05/24/16 R Pg 1 of 4 ESR Chart Frequency Range ESR (Ohms) Mode / Cut 3.200MHz to 3.999MHz 150 Max Fund / AT 4.000MHz to 4.999MHz 120 Max Fund / AT 5.000MHz to 5.999MHz 100 Max Fund / AT 6.000MHz to 7.999MHz 90 Max Fund / AT 8.000MHz to 9.999MHz 70 Max Fund / AT 10.000MHz to 11.999MHz 50 Max Fund / AT 12.000MHz to 14.999MHz 50 Max Fund / AT 15.000MHz to 19.999MHz 40 Max Fund / AT 20.000MHz to 33.000MHz 30 Max Fund / AT 24.576MHz to 29.999MHz 100 Max 3rd OT / AT 30.000MHz to 80.000MHz 80 Max 3rd OT / AT Part Number Guide MMD MONITOR/QUARTZEK – An ILSI Company, 5458 Louie Lane, Reno, NV 89511 Phone: (775) 851-8880, www.mmdcomp.com Revision: Specifications are subject to change without notice. 05/24/16 R Pg 2 of 4 Mechanical Details 13.20 [.520] MAX MXXXXX SYMCCL D = 4.50 [.177] MAX F = 3.50 [.138] MAX 0.79 [.031] 11.70 [.461] MAX 4.88 [.192] 5.00 [.197] MAX DIMENSION IN BRACKETS ARE IN INCHES 2.00 [.079] 5.50 [.217] PIN CONNECTIONS PIN 1 CRYSTAL CRYSTAL PIN 2 15.00 [.591] 4.00 [.157] SUGGESTED LAND PATTERN Tape & Reel Pitch Tape Width REEL DIA DIRECTION OF FEED PITCH TAPE WIDTH REEL DIA COUNT. 12.00 [.628] 24.00 [.945] 330 [13] 1000 NOTES: UNLESS OTHERWISE SPECIFIED 1. Applicable Standards / Specifications ANSI Y14.5M, Dimensions and Tolerances EIA-481-B, 8 mm through 200mm Embossed Carrier Taping and 8 mm and 12 mm Punched Carrier Taping of Surface Mount Components for Automatic Handling. 2. Dimensions are in millimeters. 3. Tolerances are ±0.1 [.004] mm unless otherwise specified. 4. Do not scale drawing. MMD MONITOR/QUARTZEK – An ILSI Company, 5458 Louie Lane, Reno, NV 89511 Phone: (775) 851-8880, www.mmdcomp.com Revision: Specifications are subject to change without notice. 05/24/16 R Pg 3 of 4 3rd Lead Mechanical Details MXXXXX SYMCCL 4.80 [.189] MAX 4.20 [.165] MAX 0.65 [.026] 1 12.70 [.500] MAX 3 11.50 [.453] MAX 4.40 [.173] 2 0.95 [.037] DIMENSION IN BRACKETS ARE IN INCHES 1.50 [.059] 5.00 [.197] 4.00 [.157] 1.50 [.059] 4.00 [.157] PIN CONNECTIONS CRYSTAL PIN 1 CRYSTAL PIN 2 CASE GROUND PIN 3 5.00 [.197] SUGGESTED LAND PATTERN 3rd Lead Tape & Reel Dimensions Pitch Tape Width REEL DIA PITCH TAPE WIDTH REEL DIA COUNT 12.00 [.471] 24.00 [.942] 330 [13.0] 1000pcs NOTES: UNLESS OTHERWISE SPECIFIED Applicable Standards / Specifications ANSI Y14.5M, Dimensions and Tolerances EIA-481-B, 8 mm through 200mm Embossed Carrier Taping and 8 mm and 12 mm Punched Carrier Taping of Surface Mount Components for Automatic Handling. Dimensions are in millimeters. Tolerances are ±0.10 [.004] mm unless otherwise specified. Do not scale drawing. MMD MONITOR/QUARTZEK – An ILSI Company, 5458 Louie Lane, Reno, NV 89511 Phone: (775) 851-8880, www.mmdcomp.com Revision: Specifications are subject to change without notice. 05/24/16 R Pg 4 of 4