MIH Series 5X7 Ceramic SMD Oscillator Low Profile SMD Package Hermetically Sealed RoHS Compliant Wide Frequency Range Frequency Range 1.500MHZ to 156.250MHZ Temperature Stability* (See Part Number Guide for Options) Operating Temperature Range (See Part Number Guide for Options) Storage Temperature Range -55°C to +125°C Aging (+25°C ±3°C) ±5ppm for first year Waveform HCMOS Supply Voltage ±5% (Vdd) +1.80 VDC +2.50 VDC 15mA 40mA 40mA 70mA 15pF 10 TTL Gates or 30pF 10 TTL Gates or 50pF Supply Current Load 15pF +3.30 VDC Logic “0” 10% Vdd max Logic “1” 90% Vdd min Rise/Fall Time (10% to 90% of Supply Voltage) Symmetry (50% of waveform) +5.00 VDC 4nSec 40%/60% (45%/55% optional) Start-up Time 10mSec max Jitter (RMS) Less than 1 pSec Vih = 70% of Vdd min to Enable Output Vil = 30% max or grounded to Disable Output (High Impedance) Tri-State Operation Standby Current Consumption 10uA * Inclusive of Temperature., Load and Voltage Mechanical & Environmental Detail Shock Solderability Solvent Resistance MIL-STD-883, Method 2002 Cond B MIL-STD-883, Method 2003 MIL-STD-202, Method 215 Marking Detail Line 1 = MXXXXX M = MMD XXXXX = Frequency in MHZ = Internal Code = 4 Digit Date Code (Year / Week) = Denotes RoHS Compliant Line 2 = SYYWWL S Vibration MIL-STD-883, Method 2007, Cond A YYWW Gross Leak Test MIL-STD-883, Method 1014, Cond C L Fine Leak Test MIL-STD-883, Method 1014, Cond A2 MSL Level 1 per IPC/JEDEC J-STD 20 Line 3 = XXXXX Internal use only May vary with lots Black dot to denote Pin 1 MMD MONITOR/QUARTZEK – An ILSI Company, 5458 Louie Lane, Reno, NV 89511 Phone: (775) 851-8880, www.mmdcomp.com Revision: Subject to change without notice 07/24/13 U Pg 1of 2 Part Number Guide MI Frequ ency H 5 X 7 Ceram ic SM D O utput H = H CM O S Frequency Stability 010 = ± 10 ppm * 015 = ± 15 ppm 020 = ± 20 ppm 025 = ± 25 ppm 050 = ± 50 ppm 100 = ± 100 ppm Supply Voltage 1 = + 1.8 VDC 2 = + 2.5 VDC 3 = + 3.3 VDC 5 = + 5.0 VDC Sym m etry Blank = 40/60% A = 45/55% Packaging Blank = Bulk T = Tape and Reel O perating Tem perature Blank = 0°C to + 70°C 27 = -20°C to + 70°C 48 = -40°C to + 85°C Pin 1 C onnection Blank = N /C H = Tri-state S = Stand-by Please Consult w ith M M D Sales D epartm ent for any other Param eters or O ptions * N ot available in + 1.8 VDC and + 2.5 VDC Mechanical Details Tape & Reel Dimensions PITCH TAPE WIDTH REEL DIA Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 PITCH TAPE WIDTH REEL DIA QTY PER REEL PIN 1 ORIENT. 8.00 [.315] 16.00 [.630] 180[7 IN] 1000 Q1 NOTES: UNLESS OTHERWISE SPECIFIED 1. Applicable Standards / Specifications ANSI Y14.5M, Dimensions and Tolerances EIA-481-B, 8 mm through 200mm Embossed Carrier Taping and 8 mm and 12 mm Punched Carrier Taping of Surface Mount Components for Automatic Handling. 2. Dimensions are in millimeters. 3. Tolerances are ±0.10 [.004] mm unless otherwise specified. 4. Do not scale drawing. DIRECTION OF FEED MMD MONITOR/QUARTZEK – An ILSI Company, 5458 Louie Lane, Reno, NV 89511 Phone: (775) 851-8880, www.mmdcomp.com Revision: Subject to change without notice 07/24/13 U Pg 2of 2