UNISONIC TECHNOLOGIES CO., LTD B560C Advance DIODE 5A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER + DESCRIPTION The UTC B560C is a schottky barrier rectifier; It provides the customers high efficiency and low power loss. The UTC B560C is suitable for automatic assembly high frequency inverters and low voltage application, etc - SMC FEATURES * High efficiency * Low power loss SYMBOL A 2 1 K ORDERING INFORMATION Ordering Number Lead Free Halogen Free B560CL-SMC-R B560CG-SMC-R Note: Pin Assignment: A: Anode, K: Cathode B560CL-SMC-R Package SMC Pin Assignment 1 2 K A (1)Packing Type (1) R: Tape Reel (2)Package Type (2) SMC: SMC (3)Lead Free (3) G: Halogen Free, L: Lead Free www.unisonic.com.tw Copyright © 2012 Unisonic Technologies Co., Ltd Packing Tape Reel 1 of 3 QW-R601-072.a B560C Advance DIODE ABSOLUTE MAXIMUM RATINGS (TA=25°C, unless otherwise specified) PARAMETER SYMBOL RATINGS UNIT Maximum Peak Repetitive Reverse Voltage VRRM 60 V Maximum RMS Voltage VRMS 42 V Maximum DC Blocking Voltage VDC 60 V Average Rectified Output Current (TT=90°C) IO 5 A Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed On Rated Load IFSM 175 A (JEDEC Method) Operating Temperature TJ -55~+125 °C Storage Temperature TSTG -55~+150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. THERMAL DATA PARAMETER Junction to Ambient Note: 8.0mm2 (0.13mm thick) land pads. SYMBOL θJA RATINGS 50 UNIT °C/W ELECTRICAL CHARACTERISTICS (TA=25°C, unless otherwise specified) PARAMETER SYMBOL Forward Voltage IF=5A (Note 1) VF DC Reverse Current at Rated DC TA=25°C IR Blocking Voltage (Note 1) TA=100°C Typical Total Capacitance (Note 2) CT Notes: 1. Pulse Test Pulse Width 300μS, Duty Cycle 2%. 2. Measured at 1.0MHz and applied reverse voltage of 4.0V. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw RATINGS 0.70 0.5 20 300 UNIT V mA mA pF 2 of 3 QW-R601-072.a B560C Advance DIODE UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R601-072.a