SPICE MODELS: B520C B530C B540C B550C B560C B520C - B560C 5.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER Features · · · · · · Guard Ring Die Construction for Transient Protection Ideally Suited for Automatic Assembly Low Power Loss, High Efficiency Surge Overload Rating to 175A Peak For Use in Low Voltage, High Frequency Inverters, Free Wheeling, and Polarity Protection Application SMC B Lead Free Finish/RoHS Compliant (Note 3) A C Mechanical Data · · Case: SMC · · Moisture Sensitivity: Level 1 per J-STD-020C · · · · Polarity: Cathode Band or Cathode Notch D Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 J H Terminals: Lead Free Plating (Matte Tin Finish). Solderable per MIL-STD-202, Method 208 e3 G E Dim Min Max A 5.59 6.22 B 6.60 7.11 C 2.75 3.18 D 0.15 0.31 E 7.75 8.13 G 0.10 0.20 H 0.76 1.52 J 2.00 2.62 All Dimensions in mm Marking Information: See Page 3 Ordering Information: See Page 3 Weight: 0.21 grams (approximate) Maximum Ratings and Electrical Characteristics @ TA = 25°C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current @ TT = 90°C Symbol B520C B530C B540C B550C B560C Unit VRRM VRWM VR 20 30 40 50 60 V VR(RMS) 14 21 28 35 42 V IO 5.0 A Non-Repetitive Peak Forward Surge Current, 8.3 ms single half-sine-wave Superimposed on Rated Load IFSM 175 A Forward Voltage VFM @ IF = 5.0A DC Peak Reverse Current at Rated DC Blocking Voltage @ TA = 25°C @ TA = 100°C 0.55 0.70 IRM 0.5 20 V mA CT 300 pF Thermal Resistance, Junction to Terminal RqJT 10 °C/W Thermal Resistance, Junction to Ambient (Note 1) RqJA 50 °C/W Tj -55 to +125 °C TSTG -55 to +150 °C Typical Total Capacitance (Note 2) Operating Temperature Range Storage Temperature Range Notes: 1. Thermal Resistance: Junction to ambient, unit mounted on PC board with 8.0 mm2 (0.033 mm thick) copper pads as heat sink. 2. Measured at 1.0 MHz and applied reverse voltage of 4.0V DC. 3. RoHS revision 13.2.2003. High Temperature Solder Exemption Applied, see EU Directive Annex Note 7. DS13012 Rev. 8 - 2 1 of 3 www.diodes.com B520C-B560C ã Diodes Incorporated IF, INSTANTANEOUS FORWARD CURRENT (A) IO, AVERAGE RECTIFIED CURRENT (A) 5.0 4.0 3.0 2.0 1.0 0 25 50 75 100 125 150 100 10 B550C - B560C 1.0 Tj = 25ºC IF Pulse Width = 300 ms 0.1 0 0.2 0.4 0.6 0.8 1.0 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics TT, TERMINAL TEMPERATURE (ºC) Fig. 1 Forward Current Derating Curve 175 1000 Single Half-Sine-Wave CT, TOTAL CAPACITANCE (pF) IFSM, PEAK FORWARD SURGE CURRENT (A) B520C - B540C 140 105 70 35 Tj = 25°C f = 1MHz 100 10 0 1 10 0.1 100 10 100 VR, DC REVERSE VOLTAGE (V) Fig. 4 Typical Total Capacitance NUMBER OF CYCLES AT 60 Hz Fig. 3 Max Non-Repetitive Peak Forward Surge Current IR, INSTANTANEOUS REVERSE CURRENT (mA) 1 100 Tj = 125°C 10 Tj = 100°C 1.0 0.1 0.01 Tj = 25°C 0.001 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 5 Typical Reverse Characteristics DS13012 Rev. 8 - 2 2 of 3 www.diodes.com B520C-B560C Ordering Information Notes: (Note 4) Device Packaging Shipping B520C-13-F SMC 3000/Tape & Reel B530C-13-F SMC 3000/Tape & Reel B540C-13-F SMC 3000/Tape & Reel B550C-13-F SMC 3000/Tape & Reel B560C-13-F SMC 3000/Tape & Reel 4. For Packaging Details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. Marking Information YWW B5x0C B5x0C = Product type marking code, ex: B540C (SMC package) = Manufacturers’ code marking YWW = Date code marking Y = Last digit of year ex: 2 for 2002 WW = Week code 01 to 52 x = 2,3,4,5 or 6 - i.e., x = 4 for B540C IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. DS13012 Rev. 8 - 2 3 of 3 www.diodes.com B520C-B560C