UNISONIC TECHNOLOGIES CO., LTD UD3H Preliminary DUAL TRANSISTOR GENERAL PURPOSE (DUAL DIGITAL TRANSISTORS) DESCRIPTION 6 The UTC UD3H is Dual Digital Transistors including a NPN transistor and a PNP transistor. The transistor elements are independent to eliminate, interference. 5 4 1 2 3 SOT-26 FEATURES * Transistor elements are independent, eliminating interference. * Mounting cost and area can be cut in half. EQUIVALENT CIRCUIT (6) (5) R1 (4) R2 TR1 TR2 R1=10kΩ R2=10kΩ R1 R2 (1) (2) (3) ORDERING INFORMATION Ordering Number Lead Free Halogen Free UD3HL-AG6-R UD3HG-AG6-R UD3HL-AG3-R Package SOT-26 Pin Assignment 1 2 3 4 5 6 E2 B2 C1 E1 B1 C2 (1)Packing Type (1) R: Tape Reel (2)Package Type (2) AG3: SOT-26 (3)Halogen Free (3) Halogen Free, L: Lead Free www.unisonic.com.tw Copyright © 2011 Unisonic Technologies Co., Ltd Packing Tape Reel 1 of 2 QW-R218-020.a UD3H Preliminary DUAL TRANSISTOR ABSOLUTE MAXIMUM RATINGS (TA=25°C) PARAMETER SYMBOL VCC RATINGS UNIT 50 V -10 V Input Voltage VIN 40 V 50 mA IO Output Current IC(MAX.) 100 mA Power Dissipation (Note 2) PD 300 mW Junction Temperature TJ 150 °C Storage Temperature TSTG -55 ~ +150 °C Notes: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. 2. 200mW per element must not be exceeded. Supply Voltage ELECTRICAL CHARACTERISTICS (TA =25°C) PARAMETER Input Voltage Output Voltage Input Current Output Current Emitter Cutoff Current Transition Frequency (Note 1) Input Resistance Resistance Ratio Note: 1. Transition frequency of the device SYMBOL VI(OFF) VI(ON) VO(ON) II IO(OFF) GI fT R1 R2/ R1 TEST CONDITIONS VCC=5V, IO=100μA VO=0.3V, IO=10mA IO=10mA, II=0.5mA VI=5V VCC=50V, VI=0V VO=5V, IO=5mA VCE=10V, IE=-5mA, f=100MHz MIN TYP MAX UNIT 0.5 V 3 V 0.1 0.3 V 0.88 mA 0.5 µA 30 250 MHz 7 10 13 KΩ 0.8 1 1.2 UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 2 QW-R218-020.a