Datasheet

UNISONIC TECHNOLOGIES CO., LTD
UG9H
Preliminary
DUAL TRANSISTOR
GENERAL PURPOSE (DUAL
DIGITAL TRANSISTORS)

DESCRIPTION
The UTC UG9H is a dual digital transistor, the transistor elements
are independent and obviating interference, so the mounting cost and
area can be cut in half.

FEATURES
* Mounting cost and area can be cut in half.
* Transistor elements are independent, obviating interference.

EQUIVALENT CIRCUIT

ORDERING INFORMATION
Ordering Number
Note:

UG9HG-AG6-R
Pin Assignment: G: GND I: Input
Package
SOT-26
1
G1
Pin Assignment
2
3
4
5
I1 O2 G2 I2
6
O1
Packing
Tape Reel
O: Output
MARKING
www.unisonic.com.tw
Copyright © 2015 Unisonic Technologies Co., Ltd
1 of 3
QW-R218-026.c
UG9H

Preliminary
DUAL TRANSISTOR
ABSOLUTE MAXIMUM RATINGS (TA=25°C)
PARAMETER
SYMBOL
RATINGS
UNIT
VCC
50
V
VIN
-6 ~ +40
V
IO
70
mA
Output Current
IC
100
mA
Power Dissipation (Note 2)
PD
150
mW
Junction Temperature
TJ
150
°C
Storage Temperature
TSTG
-55 ~ +150
°C
Notes: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
2. 120mW per element must not be exceeded.
Supply Voltage
Input Voltage

ELECTRICAL CHARACTERISTICS (TA =25°C)
PARAMETER
SYMBOL
VI(OFF)
Input Voltage
VI(ON)
Output Voltage
VO(ON)
Input Current
II
Output Current
IO(OFF)
DC Current Gain
GI
Transition Frequency
fT
Input Resistance
R1
Resistance Ratio
R2/ R1
Note: Transition frequency of the transistor.
TEST CONDITIONS
MIN
VCC=5V, IO=100μA
VO=0.3V, IO=10mA
3
IO/II=10mA/0.5mA
VI=5V
VCC=50V, VI =0V
VO=5V, IO=5mA
30
VCE =10V, IE=-5mA, f=100MHz (Note 1)
7
0.8
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
TYP MAX UNIT
0.5
V
V
0.1
0.3
V
0.88 mA
0.5
µA
250
10
1
13
1.2
MHz
KΩ
2 of 3
QW-R218-026.c
UG9H
Preliminary
DUAL TRANSISTOR
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
3 of 3
QW-R218-026.c