P OWER TRANS FOR MER Chassis Mount : International Series VPL20-2500 Electrical Specifications (@25C) 1. Maximum Power: 50.0VA 2. Input Voltage – Series: 230VAC @ 50/60Hz, Parallel: 115VAC@ 50/60Hz 3. Output Voltage – Series: 20.0V CT@ 2.50A, Parallel: 10.0V @ 5.0A 4. Voltage Regulation: 20% TYP @ full load to no load 5. Hipot: 3500VAC between primary to secondary and windings to core. Dual winding construction with an insulated shroud, both made of a high temperature material that exceeds UL flammability requirements. Shrouds are provided over the connections of the leads to the windings on both primary and secondary coils. Devices are designed with a minimum of 6mm creepage distance between the primary and secondary and are manufactured with a Class B (130°C) insulation system. BRN BLU BLK WHT Construction: E A Agency Files: VIO RED GRY YEL TUV Certificate No.: R72103639, EN60950, Information Technology B Dimensions: Units: In inches A B C D E F 2.562 4.00 2.250 3.562 8.00 0.187 D C Weight: 2.3 lbs. F Connections1: Input: Series – BLK to BLU, Jumper WHT to BRN Parallel – BLK to BLU, Jumper BLK to BRN and WHT to BLU BLK RED WHT BRN YEL VIO BLU GRY Output: Series – RED to GRY, Jumper YEL to VIO Parallel – RED to GRY, Jumper RED to VIO and YEL to GRY RoHS Compliance: As of manufacturing date February 2005, all standard products meet the requirements of 2011/65/EU, known as the RoHS initiative. * Upon printing, this document is considered “uncontrolled”. Please contact Triad Magnetics’ website for the most current version. 1 Primary and secondary windings are designed to be connected in series or parallel. Winding are not intended to be used independently. Web: www.TriadMagnetics.com Phone 951-277-0757 Fax 951-277-2757 460 Harley Knox Blvd. Perris, California 92571 SCHEMATIC Publish Date: December 4, 2013