UNISONIC TECHNOLOGIES CO., LTD MBR1045C Preliminary DIODE 10A SCHOTTKY BARRIER RECTIFIER 1 DESCRIPTION TO-220 The UTC MBR1045C is a Schottky Barrier Rectifier with high efficiency, low power dissipation and high current capacity. It can be applied in high frequency, low voltage inverters, polarity protection and free wheeling applications. FEATURES 1 TO-220F1 * High surge capability * High efficiency, low power dissipation, high current capability, low forward voltage drop * Guardring for overvoltage protection SYMBOL ORDERING INFORMATION Ordering Number Lead Free Halogen Free MBR1045CL-TA3-T MBR1045CG-TA3-T MBR1045CL-TF1-T MBR1045CG-TF1-T Note: Pin Assignment: A: Anode K: Cathode Package TO-220 TO-220F1 Pin Assignment 1 2 3 A K A A K A Packing Tube Tube MARKING www.unisonic.com.tw Copyright © 2014 Unisonic Technologies Co., Ltd 1 of 3 QW-R601-100.c MBR1045C Preliminary DIODE ABSOLUTE MAXIMUM RATINGS (TA=25°C unless otherwise specified) Single phase, half wave, 60Hz, resistive or inductive load. For capacitance load, derate current by 20%. PARAMETER SYMBOL RATINGS UNIT DC Blocking Voltage VRM 45 V Working Peak Reverse Voltage VRWM 45 V Peak Repetitive Reverse Voltage VRRM 45 V RMS Reverse Voltage VR(RMS) 31.5 V 5 A Per Leg Average Rectified Output Current IO (TC=105°C) Total 10 A Non-Repetitive Peak Forward Surge Current 8.3ms IFSM 100 A Single Half Sine-Wave Superimposed on Rated Load Repetitive Peak Avalanche Power (1μs, 25°C) PARM 5000 W Operating Junction Temperature TJ +150 °C Storage Temperature TSTG -55~+150 °C Note: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. 2. Thermal resistance junction to case mounted on heatsink. THERMAL DATA PARAMETER SYMBOL θJA Junction to Ambient Junction to Case TO-220 TO-220F1 θJC RATINGS 60 2 4 UNIT °С/W °С/W °С/W ELECTRICAL CHARACTERISTICS (Per Leg) (TA =25°C, unless otherwise specified.) PARAMETER Reverse Breakdown Voltage (Note 1) SYMBOL V(BR)R Forward Voltage Drop VFM Leakage Current (Note 1) IRM TEST CONDITIONS IR=0.45mA IF=5A, TJ=25°C IF=5A, TJ=125°C VR=45V, TJ=25°C VR=45V, TJ=125°C Typical Junction Capacitance (Note 3) CJ Notes: 1. Short duration pulse test used to minimize self-heating effect. 2. Thermal resistance junction to case mounted on heatsink. 3. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN 45 TYP MAX UNIT V 0.65 V 0.55 V 100 μA 15 mA 150 pF 2 of 3 QW-R601-100.c MBR1045C Preliminary DIODE UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R601-100.c