UNISONIC TECHNOLOGIES CO., LTD MGBR10V50 Preliminary DIODE MOS GATED BARRIER RECTIFIER DESCRIPTION The UTC MGBR10V50 is a mos gated barrier rectifier, it uses UTC’s advanced technology to provide customers with low forward voltage drop and high current capability, etc. The UTC MGBR10V50 suitable for free wheeling, high frequency inverters, polarity protection, and low voltage. FEATURES * Very low forward voltage drop * High current capability * High surge capability * High efficiency SYMBOL TO-220-2 TO-220 / TO-220F TO-252 / TO-277 ORDERING INFORMATION Ordering Number Lead Free Halogen Free MGBR10V50L-TA2-T MGBR10V50G-TA2-T MGBR10V50L-TA3-T MGBR10V50G-TA3-T MGBR10V50L-TF3-T MGBR10V50G-TF3-T MGBR10V50L-TN3-R MGBR10V50G-TN3-R MGBR10V50L-T27-R MGBR10V50G-T27-R Note: Pin Assignment: A: Anode K: Cathode www.unisonic.com.tw Copyright © 2016 Unisonic Technologies Co., Ltd Package TO-220-2 TO-220 TO-220F TO-252 TO-277 Pin Assignment 1 2 3 K A A K A A K A A K A A K A Packing Tube Tape Reel Tape Reel Tape Reel Tape Reel 1 of 4 QW-R601-126.d MGBR10V50 Preliminary DIODE MARKING PACKAGE MARKING TO-220-2 TO-220 TO-220F TO252 TO-277 UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 4 QW-R601-126.d MGBR10V50 Preliminary DIODE ABSOLUTE MAXIMUM RATINGS (TA=25°C unless otherwise specified) Single phase, half wave, 60Hz, resistive or inductive load. For capacitance load, derate current by 20%. PARAMETER SYMBOL RATINGS UNIT DC Blocking Voltage (Note 1) VRM 50 V Working Peak Reverse Voltage VRWM 50 V Peak Repetitive Reverse Voltage VRRM 50 V Average Rectified Output Current IO 10 A Non-Repetitive Peak Forward Surge Current 8.3ms IFSM 150 A Single Half Sine-Wave Superimposed on Rated Load Operating Junction Temperature TJ -65 ~ +150 °C Storage Temperature TSTG -65 ~ +150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. THERMAL CHARACTERISTICS (PER LEG) PARAMETER SYMBOL TO-220 TO-220-2 Typical Thermal Resistance TO-220F θJC TO-252 TO-277 Note: FR-4 PCB, 2 oz Copper. Minimum recommended pad layout. RATINGS UNIT 2 °C/W 4 6 72 (Note) °C/W °C/W °C/W ELECTRICAL CHARACTERISTICS (PER LEG) (TA =25°C unless otherwise specified.) PARAMETER Reverse Breakdown Voltage SYMBOL V(BR)R TEST CONDITIONS IR=0.50mA IF=10A, TC=25°C Instantaneous Forward Voltage VFM IF=10A, TC=125°C VR=50V, TC=25°C Leakage Current IRM VR=50V, TC=125°C Notes: 1. Pulse Test: Pulse width ≤ 300µs, Duty cycle ≤ 2%. 2. Mounted on an FR-4 PCB, 2 oz Copper. Minimum recommended pad layout. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN 50 TYP MAX UNIT V 0.55 V 0.50 V 500 μA 25 mA 3 of 4 QW-R601-126.d MGBR10V50 Preliminary DIODE UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 4 of 4 QW-R601-126.d