UNISONIC TECHNOLOGIES CO.,LTD MGBR10L45 Preliminary DIODE MOS GATED BARRIER RECTIFIER DESCRIPTION The UTC MGBR10L45is a surface mount mos gatedbarrier rectifier,it uses UTC’s advanced technology to provide customers withlow forward voltage drop and high switching speed, etc. FEATURES * Low forward voltage drop * High switching speed SYMBOL TO-220-2 TO-252/TO-277 ORDERING INFORMATION Ordering Number Lead Free Halogen Free MGBR10L45L-TA2-T MGBR10L45G-TA2-T MGBR10L45L-TN3-R MGBR10L45G-TN3-R MGBR10L45L-T27-R MGBR10L45G-T27-R Note: Pin Assignment: A: Anode K: Cathode www.unisonic.com.tw Copyright © 2015 Unisonic Technologies Co., Ltd Package TO-220-2 TO-252 TO-277 Pin Assignment 1 2 3 K A A K A A K A Packing Tube Tape Reel Tape Reel 1 of 4 QW-R601-113.c MGBR10L45 Preliminary DIODE MARKING PACKAGE MARKING TO-220-2 TO-277 TO-252 UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 4 QW-R601-113.c MGBR10L45 Preliminary DIODE ABSOLUTE MAXIMUM RATINGS(TA=25ºC, unless otherwise specified) Single phase, half wave, 60Hz, resistive or inductive load. For capacitance load,derate current by 20%. PARAMETER SYMBOL RATINGS UNIT DC Blocking Voltage VRM 45 V WorkingPeak Reverse Voltage VRWM 45 V Peak Repetitive Reverse Voltage VRRM 45 V RMS Reverse Voltage VR(RMS) 32 V Average Rectified Output Current TC=140°C IO 10 A Non-Repetitive Peak Forward Surge Current 8.3ms IFSM 90 A Single Half Sine-Wave Superimposed on Rated Load Repetitive Peak Avalanche Power (1μs, 25°C) PARM 5000 W Operating Junction Temperature TJ -65~+150 °C Storage Temperature TSTG -65~+150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. THERMAL CHARACTERISTICS PARAMETER Junction to Ambient Junction to Case SYMBOL TO-220-2 TO-252 TO-277 TO-220-2 TO-252 TO-277 θJA θJC RATINGS 60 110 73 (Note 3) 2 2.5 13 (Note 3) UNIT °C/W °C/W ELECTRICAL CHARACTERISTICS(TA=25°C,unless otherwise specified.) PARAMETER Reverse Breakdown Voltage (Note 1) SYMBOL V(BR)R TEST CONDITIONS IR=0.5mA IF=10A, TJ=25°C Forward Voltage Drop VFM IF=10A, TJ=125°C VR=45V, TJ=25°C Leakage Current (Note 1) IRM VR=45V, TJ=125°C Notes: 1. Short duration pulse test used to minimize self-heating effect. 2. Thermal resistance junction to case mounted on heatsink. 3. Mounted on an FR4 PCB, single-sided copper, with 100cm2 copper pad area. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN 45 TYP MAX UNIT V 0.58 V 0.53 V 50 300 μA 12 40 mA 3 of 4 QW-R601-113.c MGBR10L45 Preliminary DIODE UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 4 of 4 QW-R601-113.c