UNISONIC TECHNOLOGIES CO.,LTD MGBR12L30 Preliminary DIODE MOS GATED BARRIER RECTIFIER DESCRIPTION The UTC MGBR12L30 is a surface mount mos gatedbarrier rectifier,it uses UTC’s advanced technology to provide customers withlow forward voltage drop and high switching speed, etc. FEATURES * Low forward voltage drop * High switching speed SYMBOL ORDERING INFORMATION Ordering Number Lead Free Halogen Free MGBR12L30L-T27-R MGBR12L30G-T27-R Note: Pin Assignment: A: Anode K: Common Cathode MGBR12L30L-T27-R Pin Assignment 1 2 3 A K A Package TO-277 (1)Packing Type (1) R: Tape Reel (2)Package Type (2) T27: TO-227 (3)Lead Free (3) L: Lead Free, G: Halogen Free Packing Tape Reel MARKING INFORMATION PACKAGE MARKING TO-277 www.unisonic.com.tw Copyright © 2014 Unisonic Technologies Co., Ltd 1 of 3 QW-R601-230.a MGBR12L30 Preliminary DIODE ABSOLUTE MAXIMUM RATINGS(TA=25°C, unless otherwise specified) Single phase, half wave, 60Hz, resistive or inductive load. For capacitance load,derate current by 20%. PARAMETER SYMBOL RATINGS UNIT DC Blocking Voltage VRM 30 V WorkingPeak Reverse Voltage VRWM 30 V Peak Repetitive Reverse Voltage VRRM 30 V RMS Reverse Voltage VR(RMS) 21 V Average Rectified Output Current TC=140°C IO 12 A Non-Repetitive Peak Forward Surge Current 8.3ms IFSM 200 A Single Half Sine-Wave Superimposed on Rated Load Repetitive Peak Avalanche Power (1μs, 25°C) PARM 5000 W Operating Junction Temperature TJ -65~+150 °C Storage Temperature TSTG -65~+150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. THERMAL CHARACTERISTICS (Note 3) PARAMETER SYMBOL θJA θJC Junction to Ambient Junction to Case RATINGS 73 13 UNIT °C/W °C/W ELECTRICAL CHARACTERISTICS(TA=25°C,unless otherwise specified.) PARAMETER Reverse Breakdown Voltage (Note 1) SYMBOL V(BR)R TEST CONDITIONS IR=1mA IF=12A, TJ=25°C Forward Voltage Drop VFM IF=12A, TJ=125°C VR=30V, TJ=25°C Leakage Current (Note 1) IRM VR=30V, TJ=125°C Notes: 1. Short duration pulse test used to minimize self-heating effect. 2. Thermal resistance junction to case mounted on heatsink. 3. Mounted on an FR4 PCB, single-sided copper, with 100 cm2 copper pad area. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN 30 TYP MAX UNIT V 0.54 V 0.49 V 100 500 μA 12 40 mA 2 of 3 QW-R601-230.a MGBR12L30 Preliminary DIODE UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R601-230.a