Download

POWER SOLUTIONS
Standard
Technology
Technology
09/2013
PST14
DC-DC, 150W, 300W, 500W
Conduction cooled, low profile 35mm
Web PST14
PST14, chassis mount format in 3 power level packages, is very easy to
configure in several outputs, parallel or serie operations up to few kWs.
PST14C
PST14B
PST14A
3D modelisation on
www.powersystemtechnology.com
PST14B24-12500-RT
Part number examples :
PST14C24-12150-T (Micro package, -40°C)
• 12, 24, 48, 72, 110Vdc IN
• Input filtering EN55022 & transient protection
• Reverse polarity protection
• Output from 3.3V to 48Vdc
• Operating temperature -20°C +100°C baseplate
• Options :
H : 15mm Heatsink
M : Ruggedized MIL-STD810E, MIL-STD461E CE102,
MIL-STD1275A (B and A versions only)
R : Redundant N+1
T : -40°C
V : Conformal coating
• Signals :
Remote ON/OFF
Input and Output LED
Output adjust
POWERGood
Remote senses (A and B versions only)
• Accessories compatible for the 3 packages up to 4 units :
Input parallel bus bar (12, 24, 48VdcIN only)
Output parallel bus bar
Output serial bus bar
Output N+1 bus bar including diode
Inhibition and parallel cable
JST to Screw type conversion PCB
• IP67 enclosures, semi standard versions and assemblies available
PST14C DC-DC, 150W Small size
100 x 61 x 35mm - Micro
PST14B DC-DC, 250W Flexible for parallel and series combinations
140 x 61 x 35mm - Mini
Parallel and redundancy N+1 operation
PST14A DC-DC, 500W up to few kWs
225 x 61 x 35mm - Maxi
Parallel and redundancy N+1 operation
PST14B24-12500-T (2 x Mini package, -40°C, parallel bus bar + input bus bar + parallel cable included)
PST14B24-12500-RT (Mini package, -40°C, N+1 bus bar + input bus bar + parallel cable included)
PST14A24-12500-T (2 x Maxi package, -40°C)
PST14A24-12500-24500-H (2 x Maxi package, 2 outputs, heatsink)
Contact us for configuration
PST23
DC-DC, 150W, single output
Conduction cooled
Web PST23
PST23, DC-DC in chassis mount format incorporates input filtering,reverse
polarity and transient protection, Vicor Micro module, very robust mechanical
for railways and severe environment, reverse polarity.
V1
PST23 Vin Vout Pout
12 3V3 50
5 75
24
48 12 100
72 15 150
110 24
28
48
Option
C
T
V
W
• 12, 24, 48, 72, 110Vdc IN
• 1 output from 3.3V to 48Vdc
• 100 x 78 x 20mm
• Signals : Inhibit, output adjust
• Options :
C : Molex connector, T : -40°C, V : conformal coating, W : Wago connector
• Transient protection EN50155
• EMI : EN50121-3-2
• Safety : EN60950
• Connector : Fast ON, Molex, Wago
• Operating temperature -20°C +100°C baseplate
Contact us for configuration
PST07
DC-DC, 55W, 1-3 outputs
Very low profile, wide input range
Web PST07
PST07, very wide input range and very low profile (20mm) DC-DC has been
designed for railways and industrial applications.
PST07 Vin
12
24
48
110
V1
V 2 / V3
Vout
Vout
N
N
0 : 3V3 4 :+/-12V
1 : 5V 5 :+/-24V
2 : 12V
3 : 15V
Option
T
V
Exemple : PST0712-1-4
• 12, 24, 48 or 36-140Vdc IN
• Transient protection : EN50155
• EMI : EN55022A, EN50121-3-2
• V1 : From 3.3V to 15Vdc / 30W max.
• V2 & V3 : +/-12Vdc & +/-24Vdc / 25W max.
• 3U x 4TE x 160mm
• Signals : Remote ON/OFF, LED in front panel
• Options :
T : -40°C
V : conformal coating
• Safety : EN60950
• Operating temperature : -20°C +71°C ambiant
• DIN 41612 H15 connector
Contact us for configuration
PST20
AC-DC, 300W & 600W, 1-4 outputs
VME 64X
Web PST20
PST20 is a modular and configurable AC-DC for VME applications.
• 85-265Vac IN, PFC (consult factory for DC input)
• Transient protection
• EN61000-3-2 & MIL-STD-461 CE101 compliant
• EMI : MIL-STD-461 CE102 conducted
• 6U x 8 TE x 160mm
• Signals : AC Fail, Sysreset, POWERGood signals
• Options :
T : -40°C
V : conformal coating
• Safety : EN60950
• Operating temperature : -20°C +85°C heatsink
• DIN 41612 H15 (x 2) connector
Contact us for configuration
PST22
DC-DC, 450W, 1-3 outputs
3U Eurocard for railways
V1
V2
V3
PST22 Vin Vout Pout Vout Pout Vout Pout
12
N N
N N
N N
24 3V3 50 3V3 50 3V3 LP
48
5 75
5 75
5 50
72 12 100 12 100 12 75
110 15 150 15 150 15 100
24
24
24 150
28
28
28
48
48
48
Option
F
R
S
T
V
X
LP : Low power output configuration.
See datasheet for all configurations
Semi standard versions available
Web PST22
Specially designed for railways applications, PST22 incorporates dedicated fonctionalities like active MOSFET circuit for redundancy. The unit is based on 3 Vicor Micro
modules and output 3 can be configured with a low power discrete solution.
• 12, 24, 48, 72, 110Vdc IN
• 1 to 3 isolated outputs from 3.3V to 48Vdc
• 3U x 8 TE x 160mm (or 4TE)
• Signals : Inhibition, senses (V1), POWERGood, LED
• Options :
F : without front panel, R : N+1 redundancy,
S : low profile 4 TE, T : -40°C,
V : conformal coating, X : extra energy storage
• Transient protection EN50155
• EMI : EN50155, EN50121-3-2 conducted
• Safety : EN60950
• Output voltage adjustment
• Operating temperature : -20° +71°C ambiant
• Integration of energy storage in place of V3 for EN50155 S2 compliance
• DIN 41612 H15 connector
Contact us for configuration
PST24
DC-DC, 240W, 1-3 outputs
Extremely low profile conduction cooled
V1
V2
V3
PST24 Vin Vout Pout Vout Pout Vout Pout
N N
N N
N N
24
28 2V5 120 2V5 120 2V5 10
3V3
3V3
48 3V3
5
5
5
12
12
24
24
32
32
48
48
Web PST24
Based on Vicor VI-CHIP, PST24 is a very flat (15mm) conduction cooled
DC-DC including all protections for military and avionic environment in
28Vin version.
• 24, 28, 48Vdc IN
• Transient protection : MIL-STD704A, MIL-STD1275A (28Vin)
• EMI : MIL-STD461E CE101, CE102 (28Vin)
• V1 & V2 : From 2.5V to 48Vdc / 120W
• V3 : From 2.5V to 5Vdc / 10W
• 190 x 90 x 15mm
• Signals : Remote ON/OFF, output adjust, LED
• Options :
H : heatsink
T : -55°C
V : conformal coating
• Safety : EN60950
• Environmental : MIL-STD810E
Contact us for configuration
• Operating temperature : -40°C +100°C baseplate
Option
H
T
V
o
PST25
DC-DC, 200W & 1000W, up to 4 outputs Web PST25
VME conduction cooled format
PST25 VME conduction cooled uses wedgelock for heat dissipation to the
chassis allowing minimum height of 20mm max.
• 24, 48Vdc IN
• Transient protection
• 1 to 4 outputs from 3.3V to 48Vdc
• 3U or 6U x 4TE x 160mm
• Signals : PGood, PFail, remote ON/OFF, LED
• Options :
H : heatsink
T : -40°C
V : conformal coating
• Safety : EN60950
• Environmental : MIL-STD810
• 47pin Positronic connector
• Operating temperature : -20°C +100°C heatsink
PST25A
PST25B
V1
V2
V3
V4
PST25A Vin Vout Pout Vout Pout Vout Pout Vout Pout
N N
N N
N N
N N
24
48 3V3 150 3V3 150 3V3 150 3V3 150
5 200
5 200
5 200
5 200
12 250 12 250 12 250 12 250
15 300 15 300 15 300 15 300
24
24
24
24
28
28
28
28
48
48
48
48
Option
H
T
V
Contact us for configuration
PST26
AC-DC, 150W & 300W, 1-3 outputs
Eurocard for industrial applications
Web PST26
PST26 is a Eurocard AC-DC available in single, dual or triple outputs with
flexible output voltages configuration. Based on Vicor Mini or Micro, this
PSU can operate in industrial or severe environments.
V1
PST26150 Vout Pout
3V3 150
5
12
15
24
28
48
V 2 / V3
Vout Pout
3V3 25
5
12
+/-12
15
+/-15
V2, V3 : Available if V1>5V
(V1+V2+V3) < 150W
V1
Option
F
T
V
V2
PST26300 Vout Pout Vout Pout
3V3 150 3V3 150
5 300*
5
12
12
15
15
24
24
28
28
48
48
Option
F
T
V
* : For single output only
• 85-265Vac IN PFC (100-350Vdc)
• Transient protection
• EMI : EN55022, MIL-STD461E (consult factory)
• Very low inrush current limit with active circuit
• V1, V2, V3 : From 3.3V to 48Vdc up to 300W
• 3U x 8 TE x 160mm
• Signals : Remote ON/OFF, LED in front panel
• Options : F : without front panel, T : -40°C, V : conformal coating
• Safety : EN60950
• Environmental : MIL-STD810E (shocks & vibrations)
• Operating temperature : -20°C +100°C heatsink
• DIN 41612 H15 connector
Contact us for configuration
PST21
AC-DC, 150W, 300W, 600W, 1200W
Conduction cooled, low profile
Web PST21
PST21, chassis mount configurable PSU, incorporates PFC front end with
very low inrush limiting circuit, supplying output boards based on Vicor Micro,
Mini, Maxi module with flexible output voltages configurations. Fanless, this
solution is suitable for high reliability applications.
PST21D
PST21B
PST21C
PST21A
3D modelisation on
www.powersystemtechnology.com
• 85-265Vac IN
• Active PFC EN61000-3-2
• EMI : EN55022, MIL-STD461E CE102 (M option)
• Very low inrush current limit with active circuit
• Outputs from 3.3V to 48Vdc
• Operating temperature : -20°C +100°C baseplate
• Options :
H : 15mm heatsink
M : Ruggedized MIL-STD461E CE101 & 102, MIL-STD704A,
MIL-STD810E
T : -40°C
V : conformal coating
PST21D AC-DC, 150W 1 output
165 x 61 x 35mm - Micro
Signals : Remote ON/OFF, Output adjust, POWERGood, Output LED
PST21C AC-DC, 300W 1-2 outputs
200 x 80 x 40mm - Micro, Mini
Signals : Remote ON/OFF, Output adjust, POWERGood, Output LED
PST21B AC-DC, 600W 1-3 outputs
200 x 127 x 40mm - Micro, Mini
Signals : Remote ON/OFF, Output adjust, POWERGood, Remote senses,
Output LED
Parallel or serie operations
PST21A AC-DC, 1200W 1-6 outputs
255 x 127 x 40mm
Configuration with Micro, Mini, Maxi boards
Signals : Remote ON/OFF, Output adjust, POWERGood, Remote senses,
Output LED
Parallel or serie operations
Semi standard versions and
IP67 enclosures available
See datasheet for all configurations.
Contact us for configuration
CPCIAC
AC-DC, 300W, 4 outputs
CompactPCI® 3U format
Web CPCIAC
AC-DC compact PCI® compliant with PICMG2.11, the CPCIAC has been
designed to provide more power than regular CPCI PSU. Compliant with
MIL-STD standards, it is suitable for severe environments.
• 85-265Vac IN active PFC
• EMI filtering EN55022A, MIL-STD461
• Very low inrush current limit with active circuit
• 4 outputs 3.3V, 5V, 12V, -12V
• 300W max
• Operating temperature : -40°C +55°C ambiant
• Signals :
Inhibition, enables, Power Fail, overtemp,
remote senses on V1, V2
• Parallel operation with current sharing & N+1 rendundancy
CPCIDC : DC-DC version available. See web CPCIDC.
Contact us for configuration
Design
Manufacturing & Subcontracting
p Schematic capture & simulation
p PCB layout
p 3D mechanical modelisation
p Software development
p Through life support (TLS) / obsolescence
p SMT & through holes capabilities
p RoHS or SnPb
p Automatic Optical Inspection
p Wiring & harnesses
p Conformal coating
p System integration
Tests and qualification
Quality
p EMI in-house prequalification
p Functional testing
p MIL-STD compliance
p Serial numbered report
p ISO9001 & EN9100
p IPC610 level 2 & 3
Power System Technology
Z.A la Paillerie
61340 BERD’HUIS (France)
Tel. +33 (0)2 33 83 94 94
Fax +33 (0)2 33 83 94 95
[email protected]
www.powersystemtechnology.com