UNISONIC TECHNOLOGIES CO., LTD SB260 DIODE 2.0A SCHOTTKY BARRIER RECTIFIER DESCRIPTION The UTC SB260 is a 2.0A schottky barrier rectifier, it uses UTC’s advanced technology to provide customers with low forward voltage drop, high current capability and high efficiency, etc. The UTC SB260 is suitable for use in free wheeling, high frequency inverters, low voltage and polarity protection applications. DO-41 + - FEATURES SMA (JEDEC DO-214AC) * Low forward voltage drop * High current capability * High surge capability * Low power loss * High efficiency ORDERING INFORMATION Ordering Number Lead Free Halogen Free SB260L-SMA-R SB260G-SMA-R SB260L-Z41-B SB260G-Z41-B SB260L-Z41-R SB260G-Z41-R Note: Pin Assignment: A: Anode K: Cathode SB260L-SMA-R Package SMA DO-41 DO-41 Pin Assignment 1 2 K A K A K A Packing Tape Reel Tape Box Tape Reel (1)Packing Type (1) B: Tape Box, R: Tape Reel (2)Package Type (2) SMA: SMA, Z41: DO-41 (3)Green Package (3) L: Lead Free, G: Halogen Free and Lead Free MARKING SMA Cathode Band for uni-directional Only UTC SB260 DO-41 Cathode Band for uni-directional Only Date Code L: Lead Free G: Halogen Free www.unisonic.com.tw Copyright © 2015 Unisonic Technologies Co., Ltd SB260 L: Lead Free G: Halogen Free Date Code 1 of 3 QW-R601-240.C SB260 DIODE ABSOLUTE MAXIMUM RATINGS (TA=25°C unless otherwise specified) Single phase, half wave, 60Hz, resistive or inductive load. For capacitance load, derate current by 20%. PARAMETER SYMBOL RATINGS UNIT DC Blocking Voltage VR 60 V Working Peak Reverse Voltage VRWM 60 V Repetitive Peak Reverse Voltage VRRM 60 V RMS Reverse Voltage VR(RMS) 42 V Average Rectified Output Current (TA=25°C) (Note 1) IO 2.0 A Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load IFSM 50 A (JEDEC Method) Operating Junction Temperature TJ -55~+125 °C Storage Temperature TSTG -55~+125 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. THERMAL DATA PARAMETER Junction to Ambient SYMBOL θJA RATINGS 50 UNIT °C/W ELECTRICAL CHARACTERISTICS (TA =25°C unless otherwise specified.) Single phase, half wave, 60Hz, resistive or inductive load. For capacitance load, derate current by 20%. PARAMETER SYMBOL TEST CONDITIONS Forward Voltage Drop VFM IF=2.0A Peak Reverse Current at Rated DC Blocking Voltage IRM TA=25°C Junction Capacitance (Note 2) CJ Notes: 1. Pulse width≤300μs, duty cycle≤2%. 2. Measured at 1.0MHz and applied reverse voltage of 5.0V DC. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN TYP MAX UNIT 0.70 V 0.5 mA 190 pF 2 of 3 QW-R601-240.C SB260 DIODE TYPICAL CHARACTERISTICS Forward Derating Curve Typical Forward Characteristics 10 Instantaneous Forward Current (A) Average Rectified Current (A) 4 3 2 1 0 0 25 50 75 100 125 150 175 Case Temperature (°C) 25°C 1.0 0.1 IF Pulse Width=300uS 0.3 0.5 0.7 0.9 1.1 Instantaneous Forward Voltage (V) Typical Reverse Characteristics 1E-1 Instantaneous Reverse Current (A) 125°C 1E-2 1E-3 1E-4 1E-5 1E-6 1E-7 VR=60V 25 75 50 100 125 Case Temperature (°C) 150 UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R601-240.C