New Product SB220 thru SB260 Vishay General Semiconductor Schottky Barrier Rectifier FEATURES • Guardring for overvoltage protection • Very small conduction losses • Extremely fast switching • Low forward voltage drop • High forward surge capability DO-204AC (DO-15) • High frequency operation • Solder dip 275 °C max. 10 s, per JESD 22-B106 • Compliant to RoHS directive 2002/95/EC and in accordance to WEEE 2002/96/EC TYPICAL APPLICATIONS PRIMARY CHARACTERISTICS For use in low voltage high frequency inverters, freewheeling, dc-to-dc converters, and polarity protection applications. IF(AV) 2.0 A VRRM 20 V to 60 V IFSM 60 A VF 0.50 V, 0.68 V TJ max. 125 °C, 150 °C MECHANICAL DATA Case: DO-204AC (DO-15) Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS compliant, commercial grade Terminals: Matte tin plated leads, solderable J-STD-002 and JESD 22-B102 E3 suffix meets JESD 201 class 1A whisker test per MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL SB220 SB230 SB240 SB250 SB260 UNIT Maximum repetitive peak reverse voltage VRRM 20 30 40 50 60 V Maximum RMS voltage VRMS 14 21 28 35 42 V Maximum DC blocking voltage VDC 20 30 40 50 60 V Maximum average forward rectified current at 0.375" (9.5 mm) lead length (fig. 1) IF(AV) 2.0 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 60 A Maximum full load reverse current, full cycle average at TA = 75 °C IR(AV) 30 mA Voltage rate of change (rated VR) dV/dt 10 000 V/μs Operating junction temperature range Storage temperature range Document Number: 88717 Revision: 16-Oct-09 TJ TSTG - 65 to + 125 - 65 to + 150 - 65 to + 150 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] °C °C www.vishay.com 1 New Product SB220 thru SB260 Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS Maximum instantaneous forward voltage 2.0 A SB220 SB230 VF (1) TA = 25 °C Maximum instantaneous reverse current at rated DC blocking voltage SYMBOL TA = 100 °C Typical junction capacitance SB240 SB250 0.50 SB260 0.68 UNIT V 0.50 IR (1) mA 15 8.0 CJ 170 pF Note (1) Pulse test: 300 μs pulse width, 1 % duty cycle THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL Typical thermal resistance SB220 SB230 SB240 RθJA (1) 45 RθJL (1) 14 SB250 SB260 UNIT °C/W Note Thermal resistance junction to lead P.C.B. mounted 0.375" (9.5 mm) lead length (2) ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE SB240-E3/54 0.398 54 4000 13" diameter paper tape and reel SB240-E3/73 0.398 73 2000 Ammo pack packaging RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 50 Peak Forward Surge Current (A) Average Forward Current (A) 2.5 2.0 1.5 1.0 0.5 SB220 thru SB240 SB250 and SB260 0 At Rated TL 8.3 ms Single Half Sine-Wave 40 30 20 10 0 0 25 50 75 100 125 150 175 1 100 10 Lead Temperature (°C) Number of Cycles at 60 Hz Fig. 1 - Forward Current Derating Curve Fig. 2 - Maximum Non-Repetitive Surge Current www.vishay.com 2 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 88717 Revision: 16-Oct-09 New Product SB220 thru SB260 Vishay General Semiconductor 1000 TJ = 125 °C Junction Capacitance (pF) Instantaneous Forward Current (A) 100 10 TJ = 150 °C 1 TJ = 25 °C 0.1 SB220 thru SB240 SB250 and SB260 SB220 thru SB240 SB250 and SB260 0.01 10 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1 0.1 10 100 Instantaneous Forward Voltage (V) Reverse Voltage (V) Fig. 3 - Typical Instantaneous Forward Characteristics Fig. 5 - Typical Junction Capacitance 10 000 100 Transient Thermal Impedance (°C/W) Instantaneous Reverse Current (μA) 100 TJ = 125 °C 1000 100 TJ = 75 °C SB220 thru SB240 SB250 and SB260 10 TJ = 25 °C 1 0 20 40 60 80 10 1 0.01 100 0.1 1 10 100 Percent of Rated Peak Reverse Voltage (%) t - Pulse Duration (s) Fig. 4 - Typical Reverse Characteristics Fig. 6 - Typical Transient Thermal Impedance PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-204AC (DO-15) 0.034 (0.86) 0.028 (0.71) DIA. 1.0 (25.4) MIN. 0.300 (7.6) 0.230 (5.8) 0.140 (3.6) 0.104 (2.6) DIA. 1.0 (25.4) MIN. Document Number: 88717 Revision: 16-Oct-09 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 3 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1