Datasheet

G6Z
Surface-mounting High-frequency Relay
Surface-mounting, 3-GHz-Band,
Miniature, SPDT, High-frequency
Relay
• Superior high-frequency characteristics, such as an isolation of
30 dB min., insertion loss of 0.5 dB max., and V.SWR of 1.5 max.
at 2.6 GHz.
• Surface-mounting terminals and superior high frequency
characteristics combined using semi triplate strip transmission
lines.
• Miniature dimensions of 20 × 8.6 × 8.9 mm (L × W × H).
• Choose from a lineup that includes single-winding latching
models (200 mW), double-winding latching models (360 mW),
and models with a reverse contact arrangement.
• Series includes models with an E-shape terminal structure (same
as existing models), and models with a Y-shape terminal
structure, allowing greater freedom with PCB design.
• Models with 75-Ω impedance and models with 50-Ω impedance are available.
RoHS Compliant
G
6
Z
■Model Number Legend
■Application Examples
G 6 Z@ -@ @ @ -@ @
— ——— ——
These Relays can be used for switching signals in media
equipment.
• Wire communications:
Cable TV (STB and broadcasting
infrastructure), cable modems, and
VRS (video response systems)
• Wireless communications:Transceivers, ham radios, car
telephones, ETC, ITS, high-level
TV, satellite broadcasting, text
multiplex broadcasting, pay TV,
mobile phone stations, TV
broadcasting facilities, and
community antenna systems
• Public equipment:
TVs, TV games, satellite radio units,
car navigation systems
• Industrial equipment:
Measuring equipment, test
equipment, and multiplex
transmission devices
1
2 3 4
5 6
1. Relay Function
None: Single-side stable
U:
Single-winding
latching
K:
Double-winding
latching
2. Contact Form
1:
SPDT (1c)
3. Terminal Shape
F:
Surface-mounting
terminals
P:
PCB terminals
4. Terminal arrangement
None: Y-shape terminal
structure
E:
E-shape terminal
structure
5. Characteristic Impedance
None: 75 Ω
A:
50 Ω
6. Contact Arrangement
None: Standard contact
arrangement
R:
Reverse contact
arrangement
■Ordering Information
●Standard Models with PCB Terminals
Relay Function
Enclosure
rating
Contact
form
Terminal
arrangement
E-shape
Singleside stable
Y-shape
E-shape
Singlewinding
latching
Fully sealed
SPDT
(1c)
Y-shape
E-shape
Doublewinding
latching
Y-shape
Characteristic
impedance
Model
Rated coil voltage
75 Ω
G6Z-1PE
3, 4.5, 5, 9, 12, 24 VDC
50 Ω
G6Z-1PE-A
3, 4.5, 5, 9, 12, 24 VDC
75 Ω
G6Z-1P
3, 4.5, 5, 9, 12, 24 VDC
50 Ω
G6Z-1P-A
3, 4.5, 5, 9, 12, 24 VDC
75 Ω
G6ZU-1PE
50 Ω
G6ZU-1PE-A
75 Ω
G6ZU-1P
50 Ω
G6ZU-1P-A
75 Ω
G6ZK-1PE
50 Ω
G6ZK-1PE-A
75 Ω
G6ZK-1P
50 Ω
G6ZK-1P-A
3, 4.5, 5, 9, 12, 24 VDC
Minmum packing
unit
25 pcs/tube
3, 4.5, 5, 9, 12, 24 VDC
Note. Please add the coil rated voltage (V) to the model number when ordering.
Example: G6Z-1PE DC3
In addition, the delivered product and its package will be marked with voltage specification as "@@VDC".
1
G6Z
Surface-mounting High-frequency Relay
●Standard Models with Surface-mounting Terminals
Relay Function
Enclosure
rating
Contact
form
Terminal
arrangement
E-shape
Singleside stable
Y-shape
E-shape
Singlewinding
latching
SPDT
(1c)
Fully sealed
Y-shape
E-shape
Doublewinding
latching
Y-shape
G
6
Z
Characteristic
impedance
Rated coil
voltage
Model
75 Ω
G6Z-1FE
50 Ω
G6Z-1FE-A
75 Ω
G6Z-1F
50 Ω
G6Z-1F-A
75 Ω
G6ZU-1FE
50 Ω
G6ZU-1FE-A
75 Ω
G6ZU-1F
50 Ω
G6ZU-1F-A
75 Ω
G6ZK-1FE
50 Ω
G6ZK-1FE-A
75 Ω
G6ZK-1F
50 Ω
G6ZK-1F-A
Minmum
packing unit
Minimum
ordering unit
(Tape packing)
25 pcs/tube
(300 pcs/
reel)
300 pcs/reel
3, 4.5, 5, 9, 12
and 24 VDC
3, 4.5, 5, 9, 12
and 24 VDC
3, 4.5, 5, 9, 12
and 24 VDC
Note 1. Please add the coil rated voltage (V) to the model number when ordering.
Example: G6Z-1PE DC3
In addition, the delivered product and its package will be marked with voltage specification as "@@VDC".
Note 2. When ordering Relays in tape packing (surface mounting terminal models), add "-TR" to the end of the model number.
This specification, however, is not part of the relay model number, so it is not marked on the relay case. (If "-TR" is not added to the end of the model number,
the Relays will be provided in tube packing.)
Note 3. Consult your OMRON representative for reverse contact models.
■Ratings
●Coil: Single-side Stable Models (G6E-2P(E), G6Z-1F(E))
Raged voltage
Rated current
(mA)
Coil resistance
(Ω)
3 VDC
66.7
45
4.5 VDC
44.4
101
5 VDC
40.0
125
9 VDC
22.2
405
12 VDC
16.7
720
24 VDC
8.3
2,880
Must operate voltage Must release voltage
(V)
(V)
Maximum voltage
(V)
% of rated voltage
75% max.
10% min.
150%
Must reset voltage
(V)
Maximum voltage
(V)
Power consumption
(mW)
Approx. 200
●Coil: Single-winding Latching Models (G6ZU-1P(E), G6ZU-1F(E))
Raged voltage
Rated current
(mA)
Coil resistance
(Ω)
3 VDC
66.7
45
4.5 VDC
44.4
101
5 VDC
40.0
125
9 VDC
22.2
405
12 VDC
16.7
720
24 VDC
8.3
2,880
Must set voltage
(V)
% of rated voltage
75% max.
75% max.
150%
Must reset voltage
(V)
Maximum voltage
(V)
Power consumption
(mW)
Approx. 200
●Coil: Double-winding Latching Models (G6ZK-1P(E), G6ZK-1F(E))
Raged voltage
Rated current
(mA)
Coil resistance
(Ω)
3 VDC
120
25
4.5 VDC
80
56
5 VDC
72
69
9 VDC
40
225
12 VDC
30
400
24 VDC
15
1,600
Must set voltage
(V)
% of rated voltage
75% max.
75% max.
150%
Power consumption
(mW)
Approx. 360
Note 1. The rated current and coil resistance are measured at a coil temperature of 23°C with a tolerance of ±10%.
Note 2. The operating characteristics are measured at a coil temperature of 23°C.
Note 3. The maximum voltage is the highest voltage that can be imposed on the Relay coil instantaneously.
Note 4. The voltage measurements for operate/release and set/reset are the values obtained for instantaneous changes in the voltage (rectangular wave).
2
G6Z
Surface-mounting High-frequency Relay
● Contacts
Item
*
● High-frequency Characteristics *1
Load
Resistive load
Rated load
10 mA at 30 VAC
10 mA at 30 VDC
10 W at 900 MHz *
Rated carry
current
0.5 A
Max. switching
voltage
30 VAC, 30 VDC
Max. switching
current
0.5 A
Frequency
900MHz
TH
Item
Isolation
Insertion loss
(not including
substrate loss)
V.SWR
This value is for an impedance of 50Ω or 75Ω
with a V.SWR of 1.2 max.
Return loss
2.6GHz
SMD
TH
SMD
E-shape Y-shape E-shape Y-shape E-shape Y-shape E-shape Y-shape
75 Ω
65 dB min.
50 Ω
60 dB min.
75 Ω
0.2 dB max.
0.5 dB max.
50 Ω
0.1 dB max.
0.3 dB max.
75 Ω
1.2 dB max.
1.5 dB max.
50 Ω
1.1 dB max.
1.3 dB max.
75 Ω
20.8 dB min.
14.0 dB min.
50 Ω
26.4 dB min.
17.7 dB min.
Maximum carry power
60dB min.
35 dB
min.
45 dB
min.
30 dB
min.
40 dB
min.
10W *2
Note. The above values are initial values.
*1. Contact your OMRON representative if the Relay will be used in applications that require high
repeatability with high-frequency characteristics in microload regions.
*2. These values are for an impedance of 50 Ω or 75 Ω with a V.SWR of 1.2 max.
■Characteristics
Relay Function
Model
Single-side stable models
Single-winding latching models
Double-winding latching models
G6Z-1P(E), G6Z-1F(E)
G6ZU-1P(E), G6ZU-1F(E)
G6ZK-1P(E), G6ZK-1F(E)
Contact resistance *1
100 mΩ max.
Operating (set) time
10 ms max.
Release (reset) time
10 ms max.
−
Minimum set/reset pulse time
Insulation resistance *2
12 ms
100 MΩ min. (at 500 VDC)
Between Coil and
contacts
1,000 VAC, 50/60 Hz for 1 min
Between ground and
coil/contacts
500 VAC, 50/60 Hz for 1 min
Between Contacts of
the same polarity
500 VAC, 50/60 Hz for 1 min
Vibration
resistance
Destruction
10 to 55 to 10 Hz, 0.75 mm single amplitude (1.5 mm double amplitude)
Malfunction
10 to 55 to 10 Hz, 0.75 mm single amplitude (1.5 mm double amplitude)
Shock
resistance
Destruction
1,000 m/s2
Malfunction
500 m/s2
Mechanical
1,000,000 operations min. (at 36,000 operations/hour)
Electrical
300,000 operations min. (30 VAC, 10 mA/30 VDC, 10 mA), 100,000 operations min. (900 MHz, 10 W) at a switching
frequency of 1,800 operations/hour
Dielectric
strength
Durability
G
6
Z
Ambient operating temperature
-40°C to 70°C (with no icing or condensation)
Ambient operating humidity
5% to 85% RH
Weight
Approx. 2.8 g
Note. The above values are initial values.
*1. The contact resistance was measured with 10 mA at 1 VDC with a voltage drop method.
*2. The insulation resistance was measured with a 500 VDC megohmmeter applied to the same parts as those used for checkingthe dielectric strength.
3
G6Z
Surface-mounting High-frequency Relay
■Engineering Data
● Ambient Temperature vs. Must
Operate or Must Release Voltage
On the basis of rated voltage (%)
Maximum voltage (%)
● Ambient Temperature vs. Maximum
Voltage
250
200
150
100
● Shock Malfunction
Y
100
Sample: G6Z-1P 5 VDC
90 Number of relays: 5 pcs
1,000
Max. estimated value
80
max.
70
60
60
80
100
−40
−20
0
20
Z’
80 100
Ambient temperature (°C)
● Electrical Durability (with Must Operate
and Must Release Voltage)
On the basis of rated voltage (%)
On the basis of rated voltage (%)
1,000
Y’
Unit:
m/s2
Sample: G6Z-1P-A
5 VDC / 50 Ω
Number of relays: 5 pcs
Conditions: Shock is applied in ±X, ±Y, and ±Z
directions three times each with and
without energizing the Relays to check
for contact malfunctions.
100
Sample: G6Z-1PE 75Ω 5 VDC
Number of Relays: 5 pcs
Test conditions: 10 mA resistive load at 30 VAC
80 Switching frequency: 1,800 operations/h
Must operate
max.
min.
60
40
Sample: G6Z-1PE 75Ω 5 VDC
Number of Relays: 5 pcs
Test conditions: 10 mA resistive load at 30 VDC
80 Switching frequency: 1,800 operations/h
Must operate
max.
min.
60
40
Must release
Must release
max.
20
max.
min.
20
min.
● Electrical Durability (Contact
Resistance) *1, *2
Contact resistance (mΩ)
0
0.0001 0.001
0.01
0.1
1
10
100
Operating frequency (×103 operations)
1,000
Sample: G6Z-1PE 75Ω 5 VDC
700 Number of Relays: 5 pcs
500 Test conditions: 10 mA resistive load
at 30 VAC
Switching frequency: 1,800 operations/h
300
0.01
0.1
1
10
100
Operating frequency (×103 operations)
● Electrical Durability (Contact
Resistance) *1, *2
NO contact
NC contact
Contact resistance (mΩ)
0
0.0001 0.001
1,000
Sample: G6Z-1PE 75Ω 5 VDC
700 Number of Relays: 5 pcs
500 Test conditions: 10 mA resistive load
at 30 VDC
Switching frequency: 1,800 operations/h
300
Contact resistance
70 Contact resistance
50
70
50
max.
max.
min.
min.
30
10
0.001 0.01
NO contact
NC contact
max.
max.
100
100
min.
min.
*1.
The tests were conducted at an ambient
temperature of 23°C.
The contact resistance data are periodically
measured reference values and are not
values from each monitoring operation.
Contact resistance values will vary according
to the switching frequency and operating
environment, so be sure to check operation
under the actual operating conditions before
use.
*2.
30
10
0.001 0.01
0.1
1
10
100 1,000
Operating frequency (×103 operations)
0.1
1
10
100 1,000
Operating frequency (×103 operations)
● External Magnetic Interference
S
N
+20
+10
0
−10
−20
S
N
+20
+10
0
−10
−20
Sample: G6Z-1P 5 VDC
Number of Relays: 5 pcs
−30
−1,200
4
(Average value)
+30
Change rate on the basis of initial value (%)
(Average value)
+30
Change rate on the basis of initial value (%)
Change rate on the basis of initial value (%)
G
6
Z
100
60
800
Y’
Ambient temperature (°C)
● Electrical Durability (with Must Operate
and Must Release Voltage) *1, *2
40
1,000
X’
600
Shock direction
X
X’
Y
Z
Must operate voltage
Must release voltage
0
−60
400
1,000
Z’
avg.
min.
10
40
Z
1,000
200
20
20
De-energized
200
40
50
0
400
50
30
−20
600
X
1,000
avg.
min.
max.
0
−40
Energized
800
−800
−400
Must operate voltage
Must release voltage
0
400
800 1,200
External magnetic field (A/m)
(Average value)
+30
S
N
+20
+10
0
−10
−20
Sample: G6Z-1P 5 VDC
Number of Relays: 5 pcs
−30
−1,200
−800
−400
Must operate voltage
Must release voltage
0
400
800 1,200
External magnetic field (A/m)
Sample: G6Z-1P 5 VDC
Must operate voltage
Number of Relays: 5 pcs
Must release voltage
−30
−1,200 −800
−400
0
400
800 1,200
External magnetic field (A/m)
G6Z
Surface-mounting High-frequency Relay
● High-frequency Characteristics at
75Ω (Insertion Loss) *1, *2
(Average value (initial value))
Insertion loss (dB)
Insertion loss (dB)
(Average value (initial value))
0
Sample: G6Z-1PE 75Ω 5 VDC
with terminating resistance
20
0
0.2
40
0.4
60
0.6
● High-frequency Characteristics at
75Ω (Return Loss, V.SWR) *1, *2
(Average value (initial value))
Insertion loss (dB)
● High-frequency Characteristics at
75Ω (Isolation) *1, *2
0
1.7 V
.
S
1.6 W
R
Sample: G6Z-1PE 75Ω 5 VDC
with terminating resistance
10
Return loss
20
1.5
30
1.4
40
1.3
V.SWR
50
80
1.2
0.8
60
0
500
1,000
1,500
1.0
2,000 2,500 3,000
Frequency (MHz)
● High-frequency Characteristics at
50Ω (Isolation) *1, *2
Sample: G6Z-1PE 75Ω 5 VDC
with terminating resistance
0
500
1,000
(Average value (initial value))
Insertion loss (dB)
Insertion loss (dB)
Sample: G6Z-1PE 75Ω 5 VDC
with terminating resistance
20
70
2,000
2,500 3,000
Frequency (MHz)
● High-frequency Characteristics at
50Ω (Insertion Loss) *1, *2
(Average value (initial value))
0
1,500
N.O
N.C
0
0.2
40
0.4
60
0.6
80
0.8
1.1
N.O
N.C
0
500
1,000
1,500
1
2,000 2,500 3,000
Frequency (MHz)
● High-frequency Characteristics at
50Ω (Return Loss, V.SWR) *1, *2
(Average value (initial value))
Insertion loss (dB)
100
N.O
N.C
0
1.7 V
.
S
1.6 W
R
Sample: G6Z-1PE 75Ω 5 VDC
with terminating resistance
10
20
1.5
Return loss
30
1.4
40
1.3
50
1.2
V.SWR
60
100
N.O
N.C
0
500
1,000
1,500
1.0
2,000 2,500 3,000
Frequency (MHz)
Sample: G6Z-1PE 75Ω 5 VDC
with terminating resistance
0
500
1,000
1,500
N.O
N.C
2,000 2,500 3,000
Frequency (MHz)
70
1.1
N.O
N.C
0
500
1,000
1,500
1
2,000 2,500 3,000
Frequency (MHz)
25
Must operate
Must release time
20
Sample: G6Z-1P 5 VDC
75Ω
Number of Relays: 32 pcs
Number of contacts
Number of contacts
● Must Operate and Must Release Time ● Must Operate and Must Release
Distribution *1
Bounce Time Distribution *1
30
Must operate
Must release time
25
Sample: G6Z-1P 5 VDC
75Ω
Number of Relays: 32 pcs
20
15
15
10
10
5
0
5
1.0
2.0
3.0
4.0
5.0
0
0.5
1.0
1.5
Time (ms)
*1.
*2.
2.0
Time (ms)
The tests were conducted at an ambient temperature of 23°C.
High-frequency characteristics depend on the PCB to which the Relay is mounted.
Always check these characteristics, including endurance, in the actual machine before use.
5
G
6
Z
G6Z
Surface-mounting High-frequency Relay
■Dimensions
(Unit: mm)
●Models with PCB Terminals
G6Z-1PE
G6ZU-1PE
G6Z-1PE-R
PCB Mounting Holes (Bottom View)
Tolerance: ±0.1 mm
Terminal Arrangement/Internal Connections
(Bottom View)
G6Z-1PE
Six, 1.8-dia.
Orientation mark
1
7.62
20
8.6
7
− ＋
Six, 1.0-dia. holes
Three, 1.6-dia.
Three, 0.8-dia. holes
2.54
14
13 12 11
10 9
8
7.62
15.24
G6ZU-1PE
8.9
Orientation mark
1
3
7
S − ＋
R ＋ −
6-0.6
2.54
3-0.4
7.62
0.2
(Coil
terminal)
0.18
7.62
14
13 12 11
10 9
8
15.24
G6Z-1PE-R
Orientation mark
1
7
− ＋
G
6
Z
14
Note. Each value has a tolerance of ±0.3 mm.
13 12 11
10 9
8
Note:Check carefully the coil polarity of the Relay.
G6Z-1PE-A
G6ZU-1PE-A
PCB Mounting Holes (Bottom View)
Tolerance: ±0.1 mm
Terminal Arrangement/Internal Connections
(Bottom View)
G6Z-1PE-A
Nine, 1.8-dia.
Orientation mark
1
7
− ＋
Nine, 1.0-dia. holes
7.62
20
14
8.6
13 12 11
10 9
8
2.54
7.62
15.24
G6ZU-1PE-A
8.9
Orientation mark
1
3
9-0.6
2.54
7.62
15.24
0.2
(Coil
terminal)
7
S − ＋
R ＋ −
0.18
7.62
14
13 12 11
10 9
8
Note. Each value has a tolerance of ±0.3 mm.
Note:Check carefully the coil polarity of the Relay.
G6Z-1P
G6ZU-1P
PCB Mounting Holes (Bottom View)
Tolerance: ±0.1 mm
Terminal Arrangement/Internal Connections
(Bottom View)
G6Z-1P
Eight, 1.8-dia.
Orientation mark
1
7.62
20
8.6
3 4
5
7
10 9
8
5
7
10 9
8
− ＋
Eight, 1.0-dia. holes
Three, 1.6-dia.
Three, 0.8-dia. holes
2.54
14
13 12
7.62
15.24
G6ZU-1P
8.9
Orientation mark
1
3
8-0.6
2.54
3-0.4
7.62
15.24
0.2
(Coil
terminal)
3 4
S − ＋
R ＋ −
0.18
7.62
14
13 12
Note. Each value has a tolerance of ±0.3 mm.
Note:Check carefully the coil polarity of the Relay.
6
G6Z
Surface-mounting High-frequency Relay
G6Z-1P-A
G6ZU-1P-A
PCB Mounting Holes (Bottom View)
Tolerance: ±0.1 mm
Terminal Arrangement/Internal Connections
(Bottom View)
G6Z-1P-A
Eleven, 1.8-dia.
Orientation mark
1
3 4
5
7
10 9
8
− ＋
Eleven, 1.0-dia. holes
7.62
20
14
8.6
13 12
2.54
7.62
15.24
G6ZU-1P-A
8.9
Orientation mark
1
3
0.2
(Coil
terminal)
2.54
0.18
11-0.6
7.62
15.24
5
7
10 9
8
7.62
14
Note. Each value has a tolerance of ±0.3 mm.
G6ZK-1PE
Terminal Arrangement/Internal Connections
(Bottom View)
Seven, 1.8-dia.
Orientation mark
1
Seven, 1.0-dia. holes
7.62
8.6
13 12
Note:Check carefully the coil polarity of the Relay.
PCB Mounting Holes (Bottom View)
Tolerance: ±0.1 mm
20
3 4
S − ＋
R ＋ −
Three, 1.6-dia.
Three, 0.8-dia. holes
2.54
− ＋
R
− ＋
S
14
13 12 11
6
10 9
G
6
Z
7
8
7.62
Note:Check carefully the coil polarity of the Relay.
15.24
8.9
3
7-0.6
2.54
3-0.4
7.62
15.24
0.2
(Coil
terminal)
0.18
7.62
Note. Each value has a tolerance of ±0.3 mm.
G6ZK-1PE-A
PCB Mounting Holes (Bottom View)
Tolerance: ±0.1 mm
Terminal Arrangement/Internal Connections
(Bottom View)
Ten, 1.8-dia.
Orientation mark
1
Ten, 1.0-dia. holes
− ＋
S
7.62
20
14
8.6
− ＋
R
13 12 11
6
10 9
7
8
2.54
7.62
15.24
8.9
Note:Check carefully the coil polarity of the Relay.
3
2.54
10-0.6
7.62
15.24
0.2
(Coil
terminal)
0.18
7.62
Note. Each value has a tolerance of ±0.3 mm.
7
G6Z
Surface-mounting High-frequency Relay
G6ZK-1P
PCB Mounting Holes (Bottom View)
Tolerance: ±0.1 mm
Terminal Arrangement/Internal Connections
(Bottom View)
Nine, 1.8-dia.
Orientation mark
1
3
4
7.62
20
8.6
− ＋
S
Three, 1.6-dia.
14
Three, 0.8-dia. holes
2.54
5
6
7
− ＋
R
Nine, 1.0-dia. holes
13 12
10 9
8
7.62
Note:Check carefully the coil polarity of the Relay.
15.24
8.9
3
0.2
(Coil
terminal)
0.18
9-0.6
2.54
3-0.4
7.62
15.24
7.62
Note. Each value has a tolerance of ±0.3 mm.
G6ZK-1P-A
PCB Mounting Holes (Bottom View)
Tolerance: ±0.1 mm
Terminal Arrangement/Internal Connections
(Bottom View)
Twelve, 1.8-dia.
G
6
Z
Orientation mark
1
3
4
Twelve, 1.0-dia. holes.
− ＋
S
7.62
20
14
8.6
5
6
7
− ＋
R
13 12
10 9
8
2.54
7.62
Note:Check carefully the coil polarity of the Relay.
15.24
8.9
3
2.54
12-0.6
7.62
15.24
0.2
(Coil
terminal)
0.18
7.62
Note. Each value has a tolerance of ±0.3 mm.
●Models with Surface-mounting Terminals
G6Z-1FE
G6ZU-1FE
Mounting Dimensions (Top View)
Tolerance: ±0.1 mm
Terminal Arrangement/Internal Connections
(Top View)
G6Z-1FE
Orientation mark
14
15.24
7.62
2.54
0.8
0.8
0.8
2.3
13 12 11
10 9 8
− ＋
7
1
8.6
20
G6ZU-1FE
0.2
(Coil
terminal)
9.3
6-0.6
2.54
8.3
6-1.1
0.18
9.6
15.24
1
Note 1. Each value has a tolerance of ±0.3 mm.
Note 2. The coplanarity of the terminals is 0.1 mm max.
13 12 11
10 9 8
S − ＋
R ＋ −
3-0.4
7.62
8
Orientation mark
14
7
Note:Check carefully the coil polarity of the Relay.
G6Z
Surface-mounting High-frequency Relay
G6Z-1FE-A
G6ZU-1FE-A
Mounting Dimensions (Top View)
Tolerance: ±0.1 mm
Terminal Arrangement/Internal Connections
(Top View)
G6Z-1FE-A
Orientation mark
14
15.24
7.62
13 12 11
10 9 8
2.3
2.54
− ＋
8.3
7
1
8.6
20
9-0.6
2.54
G6ZU-1FE-A
9-1.1
0.2
(Coil
terminal)
9.3
Orientation mark
14
0.18
9.6
13 12 11
10 9 8
S − ＋
R ＋ −
7.62
15.24
7
1
Note 1. Each value has a tolerance of ±0.3 mm.
Note 2. The coplanarity of the terminals is 0.1 mm max.
G6Z-1F
G6ZU-1F
Note:Check carefully the coil polarity of the Relay.
Mounting Dimensions (Top View)
Tolerance: ±0.1 mm
Terminal Arrangement/Internal Connections
(Top View)
G
6
Z
G6Z-1F
Orientation mark
14
15.24
2.54
0.8
0.8
13 12
10 9 8
2.3
− ＋
8.3
1
3 4
5
7
8.6
20
8-1.1
0.2
(Coil
terminal)
9.3
8-0.6
2.54
G6ZU-1F
0.8
7.62
Orientation mark
14
0.18
9.6
13 12
10 9 8
S − ＋
R ＋ −
3-0.4
7.62
1
15.24
Note 1. Each value has a tolerance of ±0.3 mm.
Note 2. The coplanarity of the terminals is 0.1 mm max.
G6Z-1F-A
G6ZU-1F-A
3 4
5
7
Note:Check carefully the coil polarity of the Relay.
Mounting Dimensions (Top View)
Tolerance: ±0.1 mm
Terminal Arrangement/Internal Connections
(Top View)
G6Z-1F-A
Orientation mark
14
15.24
2.3
2.54
13 12
10 9 8
− ＋
8.3
1
11-1.1
7.62
0.2
(Coil
terminal)
9.3
11-0.6
2.54
3 4
5
7
8.6
20
0.18
G6ZU-1F-A
Orientation mark
14
9.6
1
Note 1. Each value has a tolerance of ±0.3 mm.
Note 2. The coplanarity of the terminals is 0.1 mm max.
10 9 8
S − ＋
R ＋ −
7.62
15.24
13 12
3 4
5
7
Note:Check carefully the coil polarity of the Relay.
9
G6Z
Surface-mounting High-frequency Relay
G6ZK-1FE
Mounting Dimensions (Top View)
Tolerance: ±0.1 mm
Terminal Arrangement/Internal Connections
(Top View)
Orientation mark
14
15.24
7.62
13 12 11
10 9 8
2.54
0.8
0.8
0.8
2.3
1
8.6
20
8.3
0.2
(Coil
terminal)
9.3
7-0.6
2.54
0.18
6
7
Note:Check carefully the coil polarity of the Relay.
7-1.1
9.6
3-0.4
Note 1. Each value has a tolerance of ±0.3 mm.
Note 2. The coplanarity of the terminals is 0.1 mm max.
7.62
15.24
G6ZK-1FE-A
Mounting Dimensions (Top View)
Tolerance: ±0.1 mm
7.62
13 12 11
10 9 8
2.3
2.54
8.6
20
Terminal Arrangement/Internal Connections
(Top View)
Orientation mark
14
15.24
G
6
Z
− ＋
S− ＋
R
8.3
1
− ＋
S− ＋
R
6
7
Note:Check carefully the coil polarity of the Relay.
0.2
(Coil
terminal)
9.3
10-0.6
2.54
7.62
0.18
10-1.1
9.6
Note 1. Each value has a tolerance of ±0.3 mm.
Note 2. The coplanarity of the terminals is 0.1 mm max.
15.24
G6ZK-1F
Mounting Dimensions (Top View)
Tolerance: ±0.1 mm
Orientation mark
14
15.24
7.62
2.54
0.8
0.8
13 12
− ＋
S
2.3
1
8.6
20
Terminal Arrangement/Internal Connections
(Top View)
3 4
10 9 8
− ＋
R
5 6
7
8.3
Note:Check carefully the coil polarity of the Relay.
0.2
(Coil
terminal)
9.3
9-0.6
2.54
3-0.4
7.62
15.24
0.18
9-1.1
0.8
9.6
Note 1. Each value has a tolerance of ±0.3 mm.
Note 2. The coplanarity of the terminals is 0.1 mm max.
G6ZK-1F-A
Mounting Dimensions (Top View)
Tolerance: ±0.1 mm
Orientation mark
14
15.24
7.62
2.54
8.6
20
12-0.6
2.54
7.62
15.24
10
2.3
13 12
− ＋
S
8.3
1
3 4
10 9 8
− ＋
R
5 6
7
Note:Check carefully the coil polarity of the Relay.
0.2
(Coil
terminal)
9.3
Terminal Arrangement/Internal Connections
(Top View)
0.18
12-1.1
9.6
Note 1. Each value has a tolerance of ±0.3 mm.
Note 2. The coplanarity of the terminals is 0.1 mm max.
G6Z
Surface-mounting High-frequency Relay
■Tube Packing and Tape Packing
(1) Tube Packing
2. Reel Dimensions
33.5±1
• Relays in tube packing are arranged so that the orientation
mark of each Relay in on the left side.
Be sure not to make mistakes in Relay orientation when
mounting the Relay to the PCB.
Stopper (gray)
37.5±1
13±0.2 dia.
21±0.8 dia
2±0.5
A
Operation of Relays
Stopper (green)
330
80
R1
Enlarged view of A
Tube length: 530 mm (stopper not included)
No. of Relays per tube: 25 pcs
(2) Tape Packing (Surface-mounting Terminal Models)
• When ordering Relays in tape packing, add the prefix “-TR” to
the model number, otherwise the Relays in tube packing will
be provided.
Relays per Reel: 300 pcs
Minimum packing unit: 1 Reel (300 pcs)
1. Direction of Relay Insertion
3. Carrier Tape Dimensions
2±0.1
16±0.1
4±0.1
10±0.1
1.5+0.1
0 dia.
0.5±0.05
14.2±0.1
28.4±0.1
32±0.3
Pulling direction
10.2±0.1
Orientation mark
1.75±0.1
5°MAX
A
1.5+0.1
0
4±0.1
0.2
22.6±0.1
20.6±0.1
5°MAX
G
6
Z
1.7+0.15
0
Top tape
(cover tape)
R0.75
Enlarged view of A
Pulling
direction
Note. The radius of the unmarked corner is 0.3 mm.
Carrier tape
Emboss
tape
■Recommended Soldering Method
●Temperature Conditions for IRS Method
Temperature
• When using reflow soldering, ensure that the Relay terminals
and the top of the case stay below the following curve. Check
that these conditions are actually satisfied before soldering the
terminals.
• The thickness of cream solder to be applied should be
between 150 and 200 μm on OMRON’s recommended PCB
pattern.
Correct Soldering
Incorrect Soldering
Relay
T4
Terminal
T3
Land
Heel fillet
is formed
PCB
T2
Solder
T1
Insufficient amount of solder
Excessive amount of solder
Check the soldering in the actual mounting conditions before
use.
t2
Soldering Time
t1
Preheating
Measured part
Terminals
Top of case
Preheating
(T1→T2, t1)
150→180°C,
120 s max.
−
Soldering
(T3, t2)
230°C min,
30 s max.
−
Maximum peak
(T4)
250°C max.
255°C max.
• Do not quench the terminals after mounting. Clean the Relay
using alcohol or water no hotter than 40°C max.
11
G6Z
Surface-mounting High-frequency Relay
■Precautions
●For general precautions on PCB Relays, refer to the precautions provided in General Information of the Relay Product
Data Book.
Substrate Types
Correct Use
● High-frequency Characteristics Measurement Method
and Measurement Substrate
• High-frequency characteristics for the G6Z are measured in
the way shown below. Consult your OMRON representative for
details on 50-Ω models.
Measurement Method for 75-Ω Models
G6Z
Network vector analyzer
(Agilent Technologies)
75-Ω
terminating
resistance
HP8753D
50-Ω/75-Ω adapter
(Agilent Technologies)
11852B-004
(Unit: mm)
G
6
Z
4-dia.
through-hole
0.4
1.4
3.59
40
30
1
6.3
0.95
0.6-dia.
through-hole
SMD-type Substrate (75-Ω Models, E-shape or Y-shape)
40
30
Note 1. The compensation substrate is used when measuring the Relay’s
insertion loss. The insertion loss is obtained by subtracting the measured
value for the compensation substrate from the measured value with the
Relay mounted to the high-frequency measurement substrate.
Note 2. For convenience, the diagrams of the high-frequency measurement
substrates given here apply both to models with an E-shape terminal
structure and to models with a Y-shape terminal structure.
Note 3. Be sure to mount a standoff tightly to the through-hole substrate.
Note 4. Use measuring devices, connectors, and substrates that are
appropriate for 50Ω and 75Ω respectively.
Note 5. Ensure that there is no pattern under the Relay. Otherwise, the
impedance may be adversely affected and the Relay may not be able
to attain its full characteristics.
●Handling
Through-hole Substrate (75-Ω Models, E-shape or Y-shape)
40
30
Material: FR-4 glass epoxy (glass cloth impregnated with epoxy
resin and copper laminated to its outer surface)
Thickness: 1.6 mm
Thickness of copper plating: 18 μm
4-dia.
through-hole
• Do not use the Relay if it has been dropped. Dropping the
Relay may adversely affect its functionality.
• Protect the Relay from direct sunlight and keep the Relay
under normal temperature, humidity, and pressure.
• Use the Relay as soon as possible after opening the
moistureproof package. If the Relay is left for a long time after
opening the moisture-proof package, the appearance may
suffer and seal failure may occur after the solder mounting
process. To store the Relay after opening the moisture-proof
package, place it into the original package and sealed the
package with adhesive tape.
• When washing the product after soldering the Relay to a PCB,
use a water-based solvent or alcohol-based solvent, and keep
the solvent temperature to less than 40°C. Do not put the relay
in a cold cleaning bath immediately after soldering.
●Claw Securing Force During Automatic Mounting
• During automatic insertion of Relays, be sure to set the
securing force of each claw to the following so that the Relay’s
characteristics will be maintained.
1.4
(Unit: mm)
C
0.4
A
0.6-dia.
through-hole
40
30
0.95
1
Substrate for High-frequency Characteristic Compensation
(75-Ω Models, E-shape or Y-shape)
30.7
20
(Unit: mm)
4-dia.
through-hole
0.6-dia.
through-hole
0.95
40
30
1
Direction A: 4.90 N max.
Direction B: 4.90 N max.
Direction C: 4.90 N max.
Secure the claws to the shaded area. Do not attach them to the center
area or to only part of the Relay.
3.91
6.3
B
●Latching Relay Mounting
• Make sure that the vibration or shock that is generated from
other devices, such as Relays, on the same panel or substrate
and imposed on the Latching Relay does not exceed the rated
value, otherwise the set/reset status of the Latching Relay may
be changed. The Latching Relay is reset before shipping. If
excessive vibration or shock is imposed, however, the Latching
Relay may be set accidentally. Be sure to apply a reset signal
before use.
●Coating
• Do not use silicone coating to coat the Relay when it is
mounted to the PCB. Do not wash the PCB after the Relay is
mounted using detergent containing silicone. Otherwise, the
detergent may remain on the surface of the Relay.
●Repeatability
• Contact your OMRON representative if the Relay will be used
in an application that requires high repeatability in
high-frequencycharacteristics for the microload region. (Such
applications include testing and measurement equipment and
ATE applications.)
12
G6Z
Surface-mounting High-frequency Relay
G
6
Z
• Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product.
• Consult your OMRON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad
systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious
influence on lives and property if used improperly. Make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or
equipment, and be sure to provide the system or equipment with double safety mechanisms.
Note: Do not use this document to operate the Unit.
OMRON Corporation
Electronic and Mechanical Components Company
Contact: www.omron.com/ecb
Cat. No. K124-E1-04
0214(0207)(O)
13