Surface Mount Voltage Controlled Oscillator EGSM 920 - 960 MHz MLO80100-00940 V2.00 ● ● ● ● ● LSM1 Package Miniature Size Surface Mount Package Electrically Shielded Low Phase Noise Highly Linear Tuning 12.7 4.0 0.8 11.8 VCC IDENT M/A-COM PART NO. DATE VT RF 11.8 12.7 Features Description 5.5 1.7 0.8 4 DETAIL A. 1 1.5 7.15 3 5.5 The low profile surface mount package used provides for electrical shielding, ease of assembly and repeatable performance. M/A-COM’s surface mount manufacturing techniques together with automatic assembly and electrical testing ensure a high degree of electrical and mechanical repeatability at low cost and in high volume. Manufacturing is carried out in an ISO 9000 qualified facility. 1.6 3.2 The MLO80100-00940 is a fundamental single ended oscillator designed for use in cost sensitive wireless and telemetry applications. The device has been optimised by careful selection of the bipolar transistor and varactor diode for low phase noise and high linearity tuning characteristics. DETAIL A. 2 8.0 SOLDER RESIST Electrical Specifications , TA = +25°C, VCC = +5 V (unless otherwise stated) 1 Parameter Frequency Range Tuning Voltage (VT)2 RF Output Power3 Supply Voltage (VCC)4 Supply Current (ICC) Phase Noise5 Tuning Sensitivity Tuning Linearity Modulation Bandwidth Harmonic Outputs6 Frequency Pushing Frequency Pulling Frequency Drift Tune Input Capacitance Test Conditions 920 - 960 MHz SSB at 100 KHz offset from carrier 920 - 960 MHz 920 - 960 MHz 3 dB bandwidth VCC 4.75V to 5.25V 1.5:1 VSWR load, all phases 1. All specifications apply with a 50 ohm load impedance. 2. Tuning voltages shown are the minimum and maximum voltages required to tune the frequency range including temperature effects -20°C to +70°C. Devices will oscillate normally with tuning voltages from 0V to +10V. 3. Output power window includes unit to unit variation, temperature effects -20°C to +70°C and frequency flatness (typically ±0.5 dB at anyconstant temperature). Units MHz V dBm V mA dBc/Hz MHz/V Ratio MHz dBc MHz/V MHz MHz/°C pF Min 920 +0.5 -2.0 +4.75 Typ +5.00 -128 15 1.2 Max 960 +4.5 +2.0 +5.25 15 -125 1.7 2.0 -15 2.0 2.0 0.06 50 4. Devices may be operated at lower supply voltage with reduced performance. 5. For typical phase noise at other offsets see phase noise curve. 6. No non-harmonic spurious visible when measured on a test system with a dynamic range of 70 dB. Specifications Subject to Change Without Notice. M/A-COM Ltd. North America: 1 Tel. (800) 366-2266 Fax (800) 618-8883 ■ Asia/Pacific: Tel. +81 (03) 3226-1671 Fax +81 (03) 3226-1451 ■ Europe: Tel. +44 (1344) 869 595 Fax +44 (1344) 300 020 Surface Mount Voltage Controlled Oscillator MLO80100-00940 V2.00 Absolute Maximum Ratings1 Parameter Functional Configuration Absolute Maximum Pad Configuration RF Output Tuning Voltage (VT) 0 to +15V 1 Supply Voltage2 (VCC) +6V 2 VCC Storage Temperature -45°C to +100°C 3 VT Solder Assembly Temperature +230°C for 10 secs 4 N/C or Ground Case / Lid Ground 1. Exceeding these limits may cause permanent damage. 2. A series resitor will allow operation at any greater supply voltage. Used in conjunction with a bypass capacitor this will yield improved power supply decoupling and noise suppression. Substrate Material FR4. Environmental Specification Devices are designed to operate over the temperature range of -20°C to +70°C and after exposure to the shock, vibration, thermal shock and moisture conditions typically encountered in base station and subscriber terminal environments. Typical Performance @ +25°C PHASE NOISE -60 -80 -100 -120 -140 -160 100 1k 10k 100k 1M FREQUENCY OFFSET FROM CARRIER (Hz) 10M 960 940 920 900 0.0 OUTPUT POWER 20.0 1.0 0.0 -1.0 -2.0 910 920 TUNING CURVE 980 MODULATION SENSITIVITY (MHz/V) 2.0 OUTPUT POWER (dBm) 1000 FREQUENCY (MHz) PHASE NOISE (dBc/Hz) -40 930 940 FREQUENCY (MHz) 950 960 970 1.0 2.0 3.0 TUNING VOLTAGE (V) 4.0 5.0 MODULATION SENSITIVITY 18.0 16.0 14.0 12.0 0.0 1.0 2.0 3.0 TUNING VOLTAGE (V) 4.0 5.0 Specifications Subject to Change Without Notice. M/A-COM Ltd. 2 North America: Tel. (800) 366-2266 Fax (800) 618-8883 ■ Asia/Pacific: Tel. +81 (03) 3226-1671 Fax +81 (03) 3226-1451 ■ Europe: Tel. +44 (1344) 869 595 Fax +44 (1344) 300 020