Analog Power AM12N65PCFM N-Channel 650-V (D-S) MOSFET Key Features: • Low rDS(on) trench technology • Low thermal impedance • Fast switching speed VDS (V) 650 PRODUCT SUMMARY rDS(on) (mΩ) 800 @ VGS = 10V 850 @ VGS = 6V ID (A) 7 6.5 Typical Applications: • Power Supplies • Motor Drives • Consumer Electronics ABSOLUTE MAXIMUM RATINGS (TA = 25°C UNLESS OTHERWISE NOTED) Parameter Symbol Limit VDS Drain-Source Voltage 650 VGS Gate-Source Voltage ±20 a TC=25°C ID 7 Continuous Drain Current IDM Pulsed Drain Current b 30 IS 7 Continuous Source Current (Diode Conduction) a a T =25°C P 60 Power Dissipation C D TJ, Tstg -55 to 175 Operating Junction and Storage Temperature Range THERMAL RESISTANCE RATINGS Parameter Maximum Junction-to-Ambient Maximum Junction-to-Case c Symbol Maximum RθJA 62.5 RθJC 2.5 Units V A A W °C Units °C/W Notes a. Package Limited b. Pulse width limited by maximum junction temperature c. Surface Mounted on 1” x 1” FR4 Board. © Preliminary 1 Publication Order Number: DS_AM12N65PCFM_1A Analog Power AM12N65PCFM Electrical Characteristics Parameter Symbol Gate-Source Threshold Voltage Gate-Body Leakage VGS(th) IGSS Zero Gate Voltage Drain Current IDSS On-State Drain Current a ID(on) Drain-Source On-Resistance a rDS(on) Forward Transconductance a Diode Forward Voltage a gfs VSD Test Conditions Static VDS = VGS, ID = 250 uA VDS = 0 V, VGS = ±20 V VDS = 520 V, VGS = 0 V VDS = 520 V, VGS = 0 V, TJ = 55°C VDS = 5 V, VGS = 10 V VGS = 10 V, ID = 2 A VGS = 6 V, ID = 1.6 A VDS = 15 V, ID = 2 A IS = 6 A, VGS = 0 V Min Typ Max 1 ±100 1 25 15 Unit V nA uA A 800 850 22 0.82 mΩ S V Dynamic b Total Gate Charge Gate-Source Charge Gate-Drain Charge Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Input Capacitance Output Capacitance Reverse Transfer Capacitance Qg Qgs Qgd td(on) tr td(off) tf Ciss Coss Crss VDS = 100 V, VGS = 6 V, ID = 2 A VDS = 100 V, RL = 50 Ω, ID = 2 A, VGEN = 10 V, RGEN = 6 Ω VDS = 15 V, VGS = 0 V, f = 1 Mhz 23 11 11 24 10 60 11 2691 165 33 nC ns pF Notes a. Pulse test: PW <= 300us duty cycle <= 2%. b. Guaranteed by design, not subject to production testing. Analog Power (APL) reserves the right to make changes without further notice to any products herein. APL makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does APL assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in APL data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. APL does not convey any license under its patent rights nor the rights of others. APL products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the APL product could create a situation where personal injury or death may occur. Should Buyer purchase or use APL products for any such unintended or unauthorized application, Buyer shall indemnify and hold APL and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that APL was negligent regarding the design or manufacture of the part. APL is an Equal Opportunity/Affirmative Action Employer. © Preliminary 2 Publication Order Number: DS_AM12N65PCFM_1A Analog Power AM12N65PCFM Typical Electrical Characteristics 1.5 5 4 ID - Drain Current (A) RDS(on) - On-Resistance(Ω) TJ = 25°C 1 5.5V 6V,8V,10V 0.5 3 2 1 0 0 0 1 2 3 4 0 5 ID-Drain Current (A) 4 6 8 10 VGS - Gate-to-Source Voltage (V) 1. On-Resistance vs. Drain Current 2. Transfer Characteristics 4 100 TJ = 25°C ID = 2A TJ = 25°C 3 IS - Source Current (A) RDS(on) - On-Resistance(Ω) 2 2 1 0 10 1 0.1 0.01 0 2 4 6 8 10 0.2 0.4 0.6 0.8 1 1.2 VSD - Source-to-Drain Voltage (V) VGS - Gate-to-Source Voltage (V) 3. On-Resistance vs. Gate-to-Source Voltage 4. Drain-to-Source Forward Voltage 5 4500 F = 1MHz 10V,8V,6V 4 3500 5.5V Capacitance (pf) ID - Drain Current (A) 4000 3 2 Ciss 3000 2500 2000 Coss 1500 1000 1 Crss 500 0 0 0 1 2 3 4 5 0 10 15 20 VDS-Drain-to-Source Voltage (V) VDS - Drain-to-Source Voltage (V) 5. Output Characteristics © Preliminary 5 6. Capacitance 3 Publication Order Number: DS_AM12N65PCFM_1A Analog Power AM12N65PCFM Typical Electrical Characteristics 2.5 VDS = 100V ID = 2A RDS(on) - On-Resistance(Ω) (Normalized) VGS-Gate-to-Source Voltage (V) 10 8 6 4 2 0 2 1.5 1 0.5 0 10 20 30 40 -50 -25 Qg - Total Gate Charge (nC) 25 50 75 100 125 150 TJ -JunctionTemperature(°C) 7. Gate Charge 8. Normalized On-Resistance Vs Junction Temperature 100 PEAK TRANSIENT POWER (W) 700 10 uS 100 uS 10 1 mS ID Current (A) 0 10 mS 100 mS 1 1 SEC 10 SEC 100 SEC 0.1 1 DC Idm limit 600 500 400 300 200 100 Limited by RDS 0.01 0.1 1 10 100 1000 0 0.001 10000 0.01 0.1 1 10 100 1000 VDS Drain to Source Voltage (V) t1 TIME (SEC) 9. Safe Operating Area 10. Single Pulse Maximum Power Dissipation 1 D = 0.5 RθJA(t) = r(t) + RθJA 0.2 0.1 RθJA = 62.5 °C /W 0.1 0.05 P(pk) 0.02 t1 t2 0.01 TJ - TA = P * RθJA(t) Duty Cycle, D = t1 / t2 Single Pulse 0.001 0.0001 0.001 0.01 0.1 1 10 100 1000 t1 TIME (sec) 11. Normalized Thermal Transient Junction to Ambient © Preliminary 4 Publication Order Number: DS_AM12N65PCFM_1A Analog Power AM12N65PCFM Package Information DIM. A A1 A2 B b b1 c D D1 E E1 e L L1 ØP Q Option 1 MILLIMETERS MIN MAX 4.3 4.9 0.7 1.15 2.34 2.9 3.43 4.5 0.5 0.79 0.95 1.43 0.5 0.8 14.7 16.07 6.2 6.88 9.7 10.3 6.8 7.2 2.54 BSC 9.2 11.16 14.39 16.8 3.08 3.28 2.34 3.4 Option 2 Analog Power (APL) reserves the right to make changes without further notice to any products herein. APL makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does APL assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in APL data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. APL does not convey any license under its patent rights nor the rights of others. APL products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the APL product could create a situation where personal injury or death may occur. Should Buyer purchase or use APL products for any such unintended or unauthorized application, Buyer shall indemnify and hold APL and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that APL was negligent regarding the design or manufacture of the part. APL is an Equal Opportunity/Affirmative Action Employer. © Preliminary 5 Publication Order Number: DS_AM12N65PCFM_1A