Crystal Clock Oscillators 67SMO (+2.5V or +3.3V FIXED LVDS MODELS) Actual size Frequency stability (over all conditions) 0.175 gm (wt.) 67SMO 7.0±0.2 #5 #4 #1 #2 #3 1.4 1.4 1.4 #1 #2 #3 #6 #5 #4 1.2 1.5±0.15 5.0±0.2 #6 1.2 2.6 PIN 1 2 3 4 5 6 2.54 2.54 CONNECTION “ L” OPEN or “H” N.C. GND Z OUTPUT Z C-OUTPUT VDD Z : high impedance 5.08 TCXO SOLDERING PATTERN 1.6 1.6 2.2 1.6 1.6 1.6 0.01μF ~ 0.1μF 2.54 2.54 5.08 OCXO OUTPUT WAVEFORM 7.0x5.0 mm LVDS STANDARD SMD CLOCK OSCILLATORS Item General part number Frequency range XTAL Operating temperature Operating Supply voltage (VDD) Conditions Stand-by control voltage (Pin#1) Supply voltage Absolute Max. Ratings Storage temeperature Input current (Pin#1 = Open or VIH) Stand-by current*2 (Pin#1 = VIL) Symmetry Rise and fall times (20% to 80% of amplitude) Output "0" Level (-40゜ C to +85゜ C) "1" Level Load Start-up time SSB phase noise (at VDD = +3.3V & 125.000 MHz) RMS jitter (12 kHz to 20.000 MHz band) (at VDD = +3.3V & 125.000 MHz) Disable delay time Enable delay time Differential output voltage Aging Reflow condition ● LVDS OUTPUT ● PACKAGE SIZE 7.0x5.0 mm Specifications 67SMO*1 13.500 MHz to 350.000 MHz 67SMO(A) : ±100 ppm over -20゜ C to +70゜ C 67SMO(B) : ±50 ppm over -20゜ C to +70゜ C 67SMO(C) : ±30 ppm over -20゜ C to +70゜ C 67SMO(D) : ±25 ppm over -20゜ C to +70゜ C 67SMO(E) : ±20 ppm over -20゜ C to +70゜ C C to +85゜ C 67SMO(AW) : ±100 ppm over -40゜ C to +85゜ C 67SMO(BW) : ±50 ppm over -40゜ C to +85゜ C 67SMO(CW) : ±30 ppm over -40゜ C to +85゜ C 67SMO(DW) : ±25 ppm over -40゜ C to +70゜ C (Standard) -20゜ C to +85゜ C (W = Option) -40゜ +2.5V DC ±5% +3.3V DC ±5% VIH : 70% VDD min. VIL : 30% VDD max.*2 -0.5V to +5.0V DC C to +125゜ C -50゜ 70 mA max. 30 μA max. 45% to 55% at crossing point 0.7 ns max. (0.3 ns, Typical) VOL : +1.10V, Typical (+0.9V min.) VOH : +1.43V, Typical (+1.6V max.) 100 Ω (OUT-OUTN) 10 ms max. -144 dBc / Hz, Typical at 100 kHz offset 1 ps max. 200 ns max. 2 ms max. +0.33Vp-p, Typical (+0.25Vp-p min.) ±5 ppm max. at +25゜ C ±3゜ C for first year +250゜ C ±10゜ C for 10 seconds +170゜ C ±10゜ C for 1 to 2 minutes (preheating) ( * 1 ) F inal par t number to be as s i gned w i th pac k age ty pe, i nput v ol tage, fr equenc y s tabi l i ty, oper ati ng tem pe rat ure and f requency. e. g. 67S M O( 3.3VC ) 164.355MH z ( * 2 ) I nt er nal c r ys tal os c i l l ati on to be hal ted ( Pi n#1 = V IL ) PACKAGE DATA Terminal plating RoHS 84 Compliant (Pb-free) 4.0±0.1 L ∅ 1.5 + 0 -0 .1 1.75±0.1 67SMO Metal Ceramic Seam Tungsten (metalized) Gold / Nickel (surface) / (under) 2.0±0.1 D Lid Base Sealing Terminal Package C Item A MCF TEST CIRCUIT TAPE SPECIFICATIONS M B J CLK OSC 7.0x5.0 mm 13.5 to 350 MHz STANDARD SPECIFICATIONS 67SMO VCXO SPXO F A B C D F J L M Reel Dia. Qty/Reel 7.4 5.4 16.0 7.5 8.0 1.5 0.3 1.9 180 1000pcs