Crystal Clock Oscillators 7.0x5.0 mm 0.175 gm (wt.) 77SMO 7.0±0.2 #5 #4 #1 #2 #3 1.4 1.4 1.4 1.2 1.5±0.15 5.0±0.2 #6 #2 #3 #5 #4 1.2 2.6 #1 #6 PIN 1 2 3 4 5 6 2.54 2.54 CONNECTION “ L” OPEN or “H” N.C. GND Z OUTPUT Z C-OUTPUT VDD Z : high impedance 5.08 SOLDERING PATTERN 1.6 1.6 2.2 1.6 1.6 1.6 0.01μF ~ 0.1μF (at VDD = +3.3V & 155.520 MHz) Disable delay time Enable delay time Differential output voltage Aging 2.54 2.54 Operating temperature Operating Supply voltage (VDD) Conditions Stand-by control voltage (Pin#1) Supply voltage Absolute Max. Ratings Storage temeperature Input current (Pin#1 = Open or VIH) Stand-by current*2 (Pin#1 = VIL) Symmetry Rise and fall times (+0.175 V to +0.525 V DC level) Output "0" Level (-40゜ C to +85゜ C) "1" Level Load Start-up time SSB phase noise (at VDD = +3.3V & 155.520 MHz) RMS jitter (12 kHz to 20.000 MHz band) 5.08 OUTPUT WAVEFORM XTAL Specifications 77SMO*1 13.5000 MHz to 220.000 MHz 77SMO(A) : ±100 ppm over -20゜ C to +70゜ C 77SMO(B) : ±50 ppm over -20゜ C to +70゜ C 77SMO(C) : ±30 ppm over -20゜ C to +70゜ C 77SMO(D) : ±25 ppm over -20゜ C to +70゜ C 77SMO(E) : ±20 ppm over -20゜ C to +70゜ C C to +85゜ C 77SMO(AW) : ±100 ppm over -40゜ C to +85゜ C 77SMO(BW) : ±50 ppm over -40゜ C to +85゜ C 77SMO(CW) : ±30 ppm over -40゜ C to +85゜ C 77SMO(DW) : ±25 ppm over -40゜ C to +70゜ C (Standard) -20゜ C to +85゜ C (W = Option) -40゜ +2.5V DC ±5% +3.3V DC ±5% VIH : 70% VDD min. VIL : 30% VDD max.*2 -0.3V to +4.0V DC CLK OSC Frequency stability (over all conditions) ● HCSL OUTPUT ● PACKAGE SIZE 7.0x5.0 mm C to +125゜ C -50゜ VCXO Item General part number Frequency range Actual size HCSL STANDARD SMD CLOCK OSCILLATORS STANDARD SPECIFICATIONS 77SMO 7.0x5.0 mm 60 mA max. 15 μA max. 45% to 55% at crossing point 0.5 ns max. VOL : -150mV to +150mV VOH : +580mV to +850mV 50 Ω 10 ms max. TCXO (+2.5V or +3.3V FIXED HCSL MODELS) 13.5 to 220 MHz -133 dBc / Hz, Typical at 1 kHz offset 500 fs max. (85 fs, Typical) 200 ns max. 2 ms max. +0.60Vp-p min. +0.65Vp-p min. ±5 ppm max. at +25゜ C ±3゜ C for first year +250゜ C ±10゜ C for 10 seconds +170゜ C ±10゜ C for 1 to 2 minutes (preheating) Reflow condition ( * 1 ) F inal par t num ber to be as s i gned w i th pac k age ty pe, i nput v ol tage, fr equenc y s tabi l i ty, oper ati ng tem per atur e a nd f requency. e. g. 77S M O ( 3. 3V BW) 100.000M H z ( * 2 ) I nt er nal c r y s t al os c i l l ati on to be hal ted ( Pi n#1 = V IL ) OCXO 77SMO SPXO PACKAGE DATA Item Lid Base Sealing Terminal Terminal plating RoHS TAPE SPECIFICATIONS Package 77SMO Metal Ceramic Seam Tungsten (metalized) Gold / Nickel (surface) / (under) Compliant (Pb-free) MCF TEST CIRCUIT ∅ 1.5 + 0 -0 .1 1.75±0.1 4.0±0.1 2.0±0.1 A C D L B J M F A B C D F J L M Reel Dia. Qty/Reel 7.4 5.4 16.0 7.5 8.0 1.5 0.3 1.9 180 1000pcs 87