Low Voltage Positive Quartz Crystal UnitsEmitter Coupled Logic VCXO 5.0x3.2 mm 55SMOVH*1 Actual size #2 #3 #2 #3 55SMOVH-HE CONNECTION PIN Vcontrol 1 “ L” OPEN or “H” 2 GND 3 Z OUTPUT 4 Z C-OUTPUT 5 VDD 6 HE : high enable Z : high impedance 0.64 55SMOVH-LE CONNECTION PIN Vcontrol 1 “ L” OPEN or “H” 2 GND 3 OUTPUT Z 4 Z 5 C-OUTPUT VDD 6 LE : low enable Z : high impedance 1.0 1.2 1.0 #1 #6 #5 #4 2.54 SOLDERING PATTERN 1.0 1.2 0.85x6 1.2 0.01μF ～ 0.1μF 1.27 1.27 OUTPUT WAVEFORM Operating Conditions Supply voltage (VDD) Control voltage (Vcon = Pin#1) Stand-by control voltage (Pin#2) Supply voltage Absolute Vcontrol voltage Max. Ratings Storage temperature Input current (Pin#2 = HE or LE) Stand-by current (Pin#2 = LD or HD)*2 Symmetry Rise and fall times (20% to 80% of amplitude) "0" Level ( 0゜ C to +85゜ C) Output (-40゜ C to +85゜ C) "1" Level ( 0゜ C to +85゜ C) "0" Level (-40゜ C to 0゜ C) "1" Level (-40゜ C to 0゜ C) Load Start-up time Frequency linearity Frequency slope Modulation bandwidth (-3 dB) SSB phase noise (at VDD = +3.3V & 122.880 MHz) RMS jitter (12 kHz to 20.000 MHz band) Disable delay time Enable delay time Vcon input impedance (Vcon-GND) Differential output voltage Aging Reflow condition TEST CIRCUIT VCXO Operating temperature 1.2±0.2 #1 ±80 ppm min. ±2 ppm max. (VDD ±10%) C to +70゜ C (Standard) -20゜ C to +85゜ C (W = Option) -40゜ +3.3V DC ±10% +1.65V ±1.65V DC VIH : 70% VDD min. VIL : 30% VDD max.*2 -0.3V to +5.0V DC -0.3V to VDD +0.3V DC C to +100゜ C -40゜ 90 mA max. 5.0 mA max. 45% to 55% at crossing point 1.0 ns max. VOL : +1.68V max. (+1.49V min.) VOH : +2.42V max. (+2.275V min.) VOL : +1.745V max. (+1.49V min.) VOH : +2.42V max. (+2.215V min.) 50 Ω into VDD -2V 10 ms max. 10 % max. Positive 20 kHz min. TCXO #4 3.2±0.2 #5 Frequency pulling VDD = +3.3V range Vcon = +1.65V ±1.65V Frequency change vs. input voltage CLK OSC 30.000 MHz to 170.000 MHz 55SMOVH(3.3VB) : ±50 ppm over -20゜ C to +70゜ C 55SMOVH(3.3VC) : ±30 ppm over -20゜ C to +70゜ C 55SMOVH(3.3VD) : ±25 ppm over -20゜ C to +70゜ C 55SMOVH(3.3VE) : ±20 ppm over -20゜ C to +70゜ C 55SMOVH(3.3VBW) : ±50 ppm over -40゜ C to +85゜ C 55SMOVH(3.3VCW) : ±30 ppm over -40゜ C to +85゜ C 55SMOVH(3.3VDW) : ±25 ppm over -40゜ C to +85゜ C Vcon = 1/2 VDD Frequency stability (over all conditions) #6 ● LVPECL VCXO ● WIDE FREQUENCY RANGE ● PACKAGE SIZE 5.0x3.2 mm Specifications Frequency range 55SMOVH LVPECL XTAL Item General part number 0.051 gm (wt.) 5.0x3.2 mm STANDARD SMD VCXO STANDARD SPECIFICATIONS 55SMOVH 5.0±0.2 30 to 170 MHz -157 dBc / Hz, Typical at 10 MHz offset 0.3 ps max. 200 ns max. 20 μs max. 10 MΩ min. +0.4V min. ±5 ppm max. at +25゜ C ±3゜ C for first year +250゜ C ±10゜ C for 10 seconds +170゜ C ±10゜ C for 1 to 2 minutes (preheating) OCXO (+3.3V FIXED LVPECL VCXO) WIDE FREQ. RANGE ( * 1 ) F inal par t num ber to be as s i gned w i th pac k age ty pe, i nput v ol tage, fr equenc y s tabi l i ty, oper ati ng tem per atur e a nd f requency. e. g. 55S M O V H- H E( 3.3VE) 155.520 MH z ( * 2 ) I nt er nal c r y s t al os c i l l ati on to be hal ted. LD : Low di s abl e H D : H i gh di s abl e PACKAGE DATA Item Lid Base TAPE SPECIFICATIONS ∅ 1.5 + 0 -0 .1 1.75±0.1 4.0±0.1 L 2.0±0.1 Package 55SMOVH Metal Ceramic Sealing Seam Terminal Tungsten (metalized) Gold / Nickel (surface) / (under) A C D Terminal plating RoHS B J M Compliant (Pb-free) F A B C D F J L M Reel Dia. Qty/Reel 5.4 3.5 12.0 5.5 8.0 1.5 0.3 1.4 180 1000pcs 105 MCF 55SMOVH VCXO