Voltage Crystal Oscillators Quartz Controlled Crystal Units 3.2x2.5 mm Item Specifications 32SMOVD*1 1.300 MHz to 55.000 MHz 55.000 MHz to 170.000 MHz 32SMOVD(B) : ±50 ppm over -20゜ C to +70゜ C 32SMOVD(C) : ±30 ppm over -20゜ C to +70゜ C 32SMOVD(D) : ±25 ppm over -20゜ C to +70゜ C 32SMOVD(E) : ±20 ppm over -20゜ C to +70゜ C 32SMOVD(BW) : ±50 ppm over -40゜ C to +85゜ C 32SMOVD(CW) : ±30 ppm over -40゜ C to +85゜ C 32SMOVD(DW) : ±25 ppm over -40゜ C to +85゜ C Vcon = 1/2 VDD Frequency stability (over all conditions) Actual size 2.5±0.2 Operating Conditions #2 1.0±0.2 #1 1.2 1.0 #2 Absolute Max. Ratings PIN 1 2 3 4 Supply voltage Vcontrol voltage Storage temperature Symmetry CONNECTION Vcontrol GND OUTPUT VDD SOLDERING PATTERN 1.9 1.1 1.3 0.01μF ～ 0.1μF 2.3 OUTPUT WAVEFORM ±130 ppm min. ±90 ppm min. +1.8V, +2.5V DC ±5% or +3.3V DC ±10% Supply voltage (VDD) 1.0 #3 n.a. ±2 ppm max. (VDD ±5%) C to +70゜ C (Standard) -20゜ C to +85゜ C (W = Option) -40゜ Input current (no load) 0.75 #4 ±110 ppm min. Operating temperature Control voltage (Vcon = Pin#1) 0.75 1.0 #1 n.a. Rise and fall times (20% VDD to 80% VDD level) Output (-40゜ C to +85゜ C) "0" Level "1" Level Load Start-up time Frequency linearity Frequency slope Modulation bandwidth (-3 dB) SSB phase noise Vcon input impedance (Vcon-GND) Aging Reflow condition +3.3V DC ±10% 1/2 VDD ± 1/2 VDD DC -0.3V to +5.0V DC -0.3V to VDD +0.5V DC C to +100゜ C -40゜ n.a. 2 mA max. (VDD = +1.8V) 3 mA max. (VDD = +2.5V) n.a. 20 mA max. (VDD = +3.3V) 5 mA max. (VDD = +3.3V) 45% to 55% at 1/2 VDD level n.a. 6 ns max. (VDD = +1.8V) 4 ns max. (VDD = +3.3V) 5 ns max. (VDD = +2.5V & +3.3V) VOL : 20% VDD max. VOH : 80% VDD min. 15 pF max. (CMOS) 10 ms max. 10 % max. Positive 20 kHz min. -130 dBc / Hz, Typical at 1 kHz offset (at 27.000 MHz & VDD = +3.3V) -125 dBc / Hz, Typical at 1 kHz offset (at 122.880 MHz & VDD = +3.3V) 10 MΩ min. ±5 ppm max. at +25゜ C ±3゜ C for first year +250゜ C ±10゜ C for 10 seconds +170゜ C ±10゜ C for 1 to 2 minutes (preheating) VCXO #3 ±100 ppm min. TCXO 3.2±0.2 VDD = +1.8V Vcon = +0.9V ±0.9V Frequency pulling VDD = +2.5V range Vcon = +1.25V ±1.25V VDD = +3.3V Vcon = +1.65V ±1.65V Frequency change vs. input voltage CLK OSC Frequency range 32SMOVD CMOS ● CMOS OUTPUT ● WIDE FREQUENCY RANGE ● PACKAGE SIZE 3.2x2.5 mm General part number 0.025 gm (wt.) 3.2x2.5 mm STANDARD SMD VCXO STANDARD SPECIFICATIONS 32SMOVD #4 VDD = +1.8V to +3.3V XTAL (+1.8V, +2.5V or +3.3V FIXED MODELS) 1.3 to 170 MHz OCXO 32SMOVD WIDE FREQ. RANGE VCXO ( * 1 ) F inal par t num ber to be as s i gned w i th pac k age ty pe, i nput v ol tage, fr equenc y s tabi l i ty, oper ati ng tem per atur e a nd f requency. e. g. 32S M O V D ( 1. 8VC ) 54.000 MH z PACKAGE DATA Seam Terminal Tungsten (metalized) RoHS 2.0±0.1 Gold / Nickel (surface) / (under) Compliant (Pb-free) D Ceramic Sealing Terminal plating 1.5 + 0 -0 .1 1.75±0.1 Metal ∅ MCF TEST CIRCUIT L C Base 4.0±0.1 32SMOVD M B J Lid TAPE SPECIFICATIONS A Item Package F A B C D F J L M Reel Dia. Qty/Reel 3.5 2.8 8.0 3.5 4.0 1.0 0.25 1.4 180 1000pcs 2000pcs 99