TPH3002PD PRODUCT SUMMARY (TYPICAL) VDS (V) 600 RDS(on) () 0.29 Qrr (nC) GaN Power Low-loss Switch 29 D Features Low Qrr Free-wheeling diode not required Quiet Tab™ for reduced EMI at high dv/dt GSD pin layout improves high speed design RoHS compliant S D Applications G High frequency operation Compact DC-DC converters AC motor drives Battery chargers Switch mode power supplies TO-220 Package Absolute Maximum Ratings (TC=25°C unless otherwise stated) Symbol Parameter Limit Value Unit ID25°C Continuous Drain Current @TC=25°C 9 A ID100°C Continuous Drain Current @TC=100°C 6 A 33 A IDM Pulsed Drain Current (pulse width:100 s) VDSS Drain to Source Voltage 600 V VTDS Transient Drain to Source Voltage a 750 V VGSS Gate to Source Voltage ±18 V PD25°C Maximum Power Dissipation 65 W Case -55 to 150 °C Junction -55 to 175 °C -55 to 150 °C 260 °C TC Operating Temperature TJ TS TCsold Storage Temperature Soldering peak Temperature b Thermal Resistance Symbol Parameter Typical Unit RΘJC Junction-to-Case 2.3 °C /W RΘJA Junction-to-Ambient 62 °C /W Notes a: For 1 usec, duty cycle D=0.1 b: For 10 sec, 1.6mm from the case February 7, 2014, DA TPH3002PD www.transphormusa.com 1 TPH3002PD Electrical Characteristics Symbol (TC=25C° unless otherwise stated) Parameter Min Typical Max Unit Test Conditions Static VDSS-MAX Maximum Drain-Source Voltage 600 VGS(th) Gate Threshold Voltage 1.35 1.8 - 0.29 - 0.76 - 2.5 - 10 RDS(on) RDS(on) IDSS IDSS Drain-Source On-Resistance (TJ = 25°C) Drain-Source On-Resistance (TJ = 175°C) Drain-to-Source Leakage Current, TJ = 25°C Drain-to-Source Leakage Current, TJ = 150°C V VGS=0V 2.35 V VDS=VGS, ID=1mA 0.35 Ω VGS=8V, ID =5.5A, TJ = 25°C Ω VGS=8V, ID =5.5A,TJ = 175°C µA VDS=600V, VGS=0V, TJ = 25°C µA VDS=600V, VGS=0V, TJ = 150°C 60 Dynamic CISS Input Capacitance - 785 - COSS Output Capacitance - 26 - CRSS Reverse Transfer Capacitance - 3.5 - CO(er) Output Capacitance, energy related - 36 - CO(tr) Output Capacitance, time related - 63 - Qg Total Gate Charge - 6.2 9.3 Qgs Gate-Source Charge - 2.1 - Qgd Gate-Drain Charge - 2.2 - td(on) Turn-On Delay tr Rise Time 4 Td(off) Turn-Off Delay 10 tf Fall Time 4.5 VGS=0 V, VDS=400V, f =1 MHz pF VGS=0 V, VDS=0 V to 480 V nC VDS =100 V b , VGS= 0-4.5 V, ID = 5.5A ns VDS =480 V , VGS= 0-10 V, ID = 5.5 A, RG= 2 Ω 7.5 Reverse operation IS Reverse Current - - 12 A VSD Reverse Voltage - 2.3 2.9 V VSD Reverse Voltage - 1.8 2.3 V trr Reverse Recovery Time - 30 ns Qrr Reverse Recovery Charge - 29 nC VGS=0 V, TJ=100oC, Duty=5%, >10kHz VGS=0 V, IS=6A, TJ=25oC, Duty=10, >10 kHz VGS=0 V, IS=3A, TJ=25oC, Duty=10%, >10 kHz IS=5.5A, VDD=480 V, di/dt =450 A/s, TJ=25oC Notes b: Qg does not change for VDS>100 V February 7, 2014, DA TPH3002PD www.transphormusa.com 2