SKiiP 513 GD172-3DUW V3 Absolute Maximum Ratings Symbol Ts = 25°C unless otherwise specified Conditions Values Unit V System SKiiP® 3 VCC 1) Operating DC link voltage 1200 Visol DC, t = 1 s, main terminals to heat sink 5600 V It(RMS) per AC terminal, Tterminal <115°C 400 A IFSM Tj = 150 °C, tp = 10 ms, sin 180° 3500 A I²t Tj = 150 °C, tp = 10 ms, diode 61 kA²s fout fundamental output frequency 1 kHz Tstg storage temperature -40 ... 85 °C IGBT VCES IC SKiiP 513 GD172-3DUW V3 SKiiP technology inside Trench IGBTs CAL diode technology DC-Link voltage monitoring Integrated current sensor Integrated temperature sensor Integrated heat sink UL recognized File no. E63532 Typical Applications* • • • • Tj = 150 °C 1700 V Ts = 25 °C 540 A Ts = 70 °C 415 A ICnom Tj junction temperature 500 A -40 ... 150 °C Diode Features • • • • • • • • Tj = 25 °C Renewable energies Traction Elevators Industrial drives VRRM IF 1) With assembly of suitable MKP capacitor per terminal Tj = 150 °C 1700 V Ts = 25 °C 438 A Ts = 70 °C 334 A IFnom Tj junction temperature 400 A -40 ... 150 °C V Driver Vs power supply 13 ... 30 ViH input signal voltage (high) 15 + 0.3 V VisolPD QPD <= 10pC, PRIM to POWER 1500 V dv/dt secondary to primary side 75 kV/µs fsw switching frequency 14 kHz Characteristics Symbol Footnotes Tj = 25 °C Ts = 25°C unless otherwise specified Conditions min. typ. max. Unit Tj = 25 °C 1.9 2.4 V Tj = 125 °C 2.2 Tj = 25 °C 1.00 1.20 V Tj = 125 °C 0.90 1.10 V Tj = 25 °C 3 3.9 mΩ Tj = 125 °C 4.1 5 mΩ VCC = 900 V 195 mJ VCC = 1200 V 288 mJ IGBT VCE(sat) IC = 300 A at terminal VCE0 rCE Eon + Eoff at terminal IC = 300 A Tj = 125 °C V Rth(j-s) per IGBT switch 0.059 K/W Rth(j-r) per IGBT switch 0.072 K/W S33 © by SEMIKRON Rev. 0 – 13.08.2014 1 SKiiP 513 GD172-3DUW V3 Characteristics Symbol Ts = 25°C unless otherwise specified Conditions min. typ. max. Unit Tj = 25 °C 2.00 2.15 V Tj = 125 °C 1.80 Tj = 25 °C 1.1 1.2 V Tj = 125 °C 0.8 0.9 V Tj = 25 °C 2.6 3.4 mΩ Tj = 125 °C 2.9 3.7 mΩ VR = 900 V 36 mJ VR = 1200 V 43 mJ Diode VF = VEC IF = 300 A at terminal VF0 rF SKiiP® 3 Err at terminal IF = 300 A Tj = 125 °C V Rth(j-s) per diode switch 0.115 K/W Rth(j-r) per diode switch 0.18 K/W Driver Vs supply voltage non stabilized IS0 bias current @Vs=24V, fsw = 0, IAC = 0 Features Is k1 = 42 mA/kHz, k2 = 0.00211 mA/A2 VIT+ input threshold voltage (HIGH) • • • • • • • • VIT- input threshold voltage (LOW) RIN input resistance CIN input capacitance tpRESET error memory reset time tTD top / bottom switch interlock time tjitter jitter clock time tSIS short pulse suppression time ITRIPSC over current trip level 612 Ttrip over temperature trip level 110 VDCtrip over voltage trip level, input-output turn-on VCC = 1200 V propagation time IC = 300 A input-output Tj = 25 °C turn-off propagation time SKiiP 513 GD172-3DUW V3 SKiiP technology inside Trench IGBTs CAL diode technology DC-Link voltage monitoring Integrated current sensor Integrated temperature sensor Integrated heat sink UL recognized File no. E63532 Typical Applications* • • • • Renewable energies Traction Elevators Industrial drives Footnotes 1) With assembly of suitable MKP capacitor per terminal td(on)IO td(off)IO System 13 24 30 420 = 420 V mA + k1* fsw + k2 * IAC2 12.3 mA V 4.6 10 V kΩ 1 nF 0.0122 ms 3 µs 125 ns 0.625 0.7 µs 625 638 APEAK 115 120 °C 1200 V 1.4 µs 1.4 µs RCC'+EE' flow rate=8l/min, TFluid=50°C, water/ glycol ratio 50%:50% terminals to chip, Ts = 25 °C 0.5 mΩ LCE commutation inductance 12 nH CCHC per phase, AC-side 1.7 nF ICES + IRD VGE = 0 V, VCE = 1700 V, Tj = 25 °C Mdc DC terminals, SI Units 6 Mac AC terminals, SI Units 13 w SKiiP System w/o heat sink 2.4 kg wh heat sink 5.2 kg Rth(r-a) 0.0113 1.2 K/W mA 8 Nm 15 Nm S33 2 Rev. 0 – 13.08.2014 © by SEMIKRON SKiiP 513 GD172-3DUW V3 © by SEMIKRON Rev. 0 – 13.08.2014 3 SKiiP 513 GD172-3DUW V3 Fig. 1: Typical IGBT output characteristic Fig. 2: Typical diode output characteristics Fig. 3: Typical energy losses E = f(Ic, Vcc) Fig. 4: Typical energy losses E = f(Ic, Vcc) Fig. 5: Pressure drop Δp versus flow rate V Fig. 6: Transient thermal impedance Zth(j-r) 4 Rev. 0 – 13.08.2014 © by SEMIKRON SKiiP 513 GD172-3DUW V3 Fig. 7: Transient thermal impedance Zth(r-a) Fig. 8: Coefficients of thermal impedances Fig. 9: Thermal resistance Rth(r-a) versus flow rate V © by SEMIKRON Rev. 0 – 13.08.2014 5 SKiiP 513 GD172-3DUW V3 Heat sink 6 Rev. 0 – 13.08.2014 © by SEMIKRON SKiiP 513 GD172-3DUW V3 System This is an electrostatic discharge sensitive device (ESDS), international standard IEC 60747-1, Chapter IX * The specifications of our components may not be considered as an assurance of component characteristics. Components have to be tested for the respective application. Adjustments may be necessary. The use of SEMIKRON products in life support appliances and systems is subject to prior specification and written approval by SEMIKRON. We therefore strongly recommend prior consultation of our staff. © by SEMIKRON Rev. 0 – 13.08.2014 7