KSM5N65 650V N-channel MOSFET KERSMI ELECTRONIC CO.,LTD. Description This N-channel MOSFETS use advanced trench technology and design to provide excellent RDS(on) with low gate charge. It can be used in a wide variety of applications. Features 1) 2) 3) 4) BVDSS RDSON ID 650V 2.15Ω 5A Low gate charge. Green device available. Advanced high cell denity trench technology for ultra RDS(ON) Excellent package for good heat dissipation. TO-220 Absolute Maximum Ratings TC=25℃,unless otherwise noted Symbol Parameter Ratings Units VDS Drain-Source Voltage 650 VGS Gate-Source Voltage ±30 V V Continuous Drain Current-1 5.0 Continuous Drain Current-T=100℃ 2.6 Pulsed Drain Current2 18 EAS Single Pulse Avalanche Energy3 210 PD Power Dissipation4 100 TJ, TSTG Operating and Storage Junction Temperature Range -55 to + 150 ID A mJ W ℃ Thermal Characteristics www.kersemi.com 1 KSM5N65 KERSMI ELECTRONIC CO.,LTD. Symbol Parameter Ratings RƟJC Thermal Resistance, Junction to Case1 3.79 RƟJA Thermal Resistance, Junction to Ambient1 62.5 Units ℃/W Package Marking and Ordering Information Part NO. Marking Package KSM5N65 KSM5N65 TO-220 Electrical Characteristics TC=25℃ Symbol Parameter unless otherwise noted Conditions Min Typ Max Units Off Characteristics BVDSS Drain-Sourtce Breakdown Voltage VDS=0V,ID=250μA 650 — — IDSS Zero Gate Voltage Drain Current VDS=0V, VDS=32V — — 1 IGSS Gate-Source Leakage Current VDS=±20V, VDS=0A — — ±100 v μA nA VDS=VDS, ID=250μA 2.0 — 4.0 V VDS=10V,ID=6A — 2.0 2.15 VDS=2.5V,ID=5A — — — VDS=5V,ID=12A — 4.7 — — 515 670 — 55 72 — 6.5 8.5 — 10 30 — 42 90 — 38 85 On Characteristics VGS(th) GATE-Source Threshold Voltage RDS(ON) Drain-Source On Resistance² GFS Forward Transconductance Ω S Dynamic Characteristics Ciss Input Capacitance Coss Output Capacitance Crss Reverse Transfer Capacitance VDS=15V,VGS=0V, f=1MHz pF Switching Characteristics td(off) Turn-Off Delay Time tf Fall Time — 46 100 Qg Total Gate Charge — 15 19 Qgs Gate-SourceCharge VGS=4.5V, VDS=20V, — 2.5 — Qgd Gate-Drain “Miller” Charge ID=6A — 6.6 — ns ns ns ns nC nC nC — — 1.4 V — 300 — ns — 2.2 — nC td(on) Turn-On Delay Time tr Rise Time VDS=20V, VGS=10V,RGEN=3.3Ω Drain-Source Diode Characteristics VSD Source-Drain Diode ForwardVoltage² trr Reverse Recovery Time Qrr Reverse Recovery Charge VGS=0V,IS =1A IF=7A,di/dt=100A/μS www.kersemi.com 2 KSM5N65 KERSMI ELECTRONIC CO.,LTD. Notes: 1. The data tested by surface mounted on a 1 inch²FR-4 board 2OZ copper. 2. The data tested by pulsed, pulse width≤300us,duty cycle≤2% 3. The EAS data shows Max. rating .The test condition is VDD=25v,VGS=10V,L=0.1mH,iAS=17.8A 4. The power dissipation is limited by 150℃ junction temperature. Typical Characteristics TJ=25℃ Figure 1. On-Region Characteristics Figure 3. Capacitance Characteristics unless otherwise noted Figure 2. Transfer Characteristics Figure 4. On-Resistance Variation vs Drain Current and Gate Voltage www.kersemi.com 3 KSM5N65 KERSMI ELECTRONIC CO.,LTD. Figure 5. Gate Charge Characteristics Figure 7.Breakdown Voltage Variation vs. Temperature Figure 6. Body Diode Forward Voltage Variation vs. Source Current and Temperature Figure 8.Maximum Safe Operating Area Figure 9. Transient Thermal Response Curve www.kersemi.com 4