036 RSP www.vishay.com Vishay BCcomponents Aluminum Electrolytic Capacitors Radial Semi-Professional FEATURES • Useful life: 3000 h at +85 °C, 750 h at +105 °C • Reduced leakage current • Miniaturized, high CV-product per unit volume • Natural pitch 2.5 mm and 5 mm • Polarized aluminum electrolytic capacitors, non-solid electrolyte • Radial leads, cylindrical aluminum case, all-insulated (light blue) • Charge and discharge proof • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 148 RUS higher CV- values 031 RLC low leakage current 036 RSP longer life 116 RLL APPLICATIONS miniaturized • Automotive, telecommunication, industrial, EDP, and audio-video • Coupling, decoupling, smoothing, filtering, buffering, timing • Portable and mobile equipment (small size, low mass) 038 RSU Fig. 1 QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case sizes (Ø D x L in mm) 5 x 11 and 8.2 x 11 2.2 μF to 470 μF Rated capacitance range, CR ± 20 %; ± 10 % on request Tolerance on CR 6.3 V to 100 V Rated voltage range, UR Category temperature range -55 °C to +85 °C Endurance test at 85 °C 2000 h Useful life at 105 °C 750 h Useful life at 85 °C 3000 h 80 000 h Useful life at 40 °C, 1.4 x IR applied Shelf life at 0 V, 85 °C 500 h Based on sectional specification IEC 60384-4 / EN130300 Climatic category IEC 60068 55/085/56 MARKING The capacitors are marked (where possible) with the following information: • Rated capacitance (in μF) • Tolerance on rated capacitance, code letter in accordance with IEC 60062 (M for ± 20 %) • Rated voltage (in V) • Date code in accordance with IEC 60062 • Code indicating factory of origin • Name of manufacturer • Minus-sign on top to identify the negative terminal • Series number (036) SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm) CR (μF) 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 150 220 330 470 6.3 5 x 11 8.2 x 11 - Revision: 26-Apr-16 10 5 x 11 5 x 11 8.2 x 11 8.2 x 11 16 5 x 11 5 x 11 8.2 x 11 8.2 x 11 8.2 x 11 - 25 5 x 11 8.2 x 11 8.2 x 11 - UR (V) 35 5 x 11 5 x 11 8.2 x 11 - 40 5 x 11 8.2 x 11 - 50 5 x 11 5 x 11 8.2 x 11 8.2 x 11 - 63 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 8.2 x 11 5 x 11 5 x 11 8.2 x 11 8.2 x 11 8.2 x 11 8.2 x 11 - 100 8.2 x 11 8.2 x 11 - Document Number: 28312 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 036 RSP www.vishay.com Vishay BCcomponents DIMENSIONS in millimeters AND AVAILABLE FORMS ØD ØD L L + - + - 4 +0 1 15 min. Ød F Ød 5 min. 5 ± 0.5 Case Ø D x L = 8.2 mm x 11 mm only Fig. 2 - Form CA: long leads Fig. 3 - Form CB: cut leads Pitch F = 2.5 mm Case Ø D x L = 5 mm x 11 mm only Pitch F = 5 mm Case Ø D x L = 5 mm x 11 mm and 8.2 mm x 11 mm Fig. 4 - Form TFA: taped in box (ammopack) Fig. 5 - Form TNA: taped in box (ammopack) Table 1 DIMENSIONS in millimeters, MASS AND PACKAGING QUANTITIES NOMINAL CASE SIZE ØDxL CASE CODE Ød Ø Dmax. Lmax. F MASS (g) 5 x 11 11 0.5 5.5 12 2.5 ± 0.5 8.2 x 11 13 0.6 8.7 12 5.0 ± 0.5 PACKAGING QUANTITIES FORM CA, CB FORM TFA, TNA 0.4 1000 2000 1.1 1000 1000 Note • For tape dimensions, please see www.vishay.com/doc?28360. Revision: 26-Apr-16 Document Number: 28312 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 036 RSP www.vishay.com Vishay BCcomponents ORDERING EXAMPLE ELECTRICAL DATA SYMBOL CR IR IL1 tan Z DESCRIPTION Rated capacitance at 100 Hz, tolerance ± 20 % Rated RMS ripple current at 100 Hz, 85 °C Max. leakage current after 1 min at UR Max. dissipation factor at 100 Hz Max. impedance at 10 kHz and 20 °C Electrolytic capacitor 036 series 100 μF/16 V; ± 20 % Nominal case size: Ø 5 x 11 mm; Form TFA Ordering code: MAL203635101E3 Former 12NC: 2222 036 35101 Note • Unless otherwise specified, all electrical values in Table 2 apply at Tamb = 20 °C, P = 86 kPa to 106 kPa, RH = 45 % to 75 % Table 2 ELECTRICAL DATA AND ORDERING INFORMATION UR (V) 6.3 10 16 25 35 40 50 63 100 CR 100 Hz (μF) NOMINAL CASE SIZE ØDxL (mm) 100 330 47 150 220 470 33 100 150 220 330 68 100 220 22 47 150 15 68 10 33 47 100 2.2 3.3 4.7 6.8 10 10 15 22 22 33 47 68 10 22 5 x 11 8.2 x 11 5 x 11 5 x 11 8.2 x 11 8.2 x 11 5 x 11 5 x 11 8.2 x 11 8.2 x 11 8.2 x 11 5 x 11 8.2 x 11 8.2 x 11 5 x 11 5 x 11 8.2 x 11 5 x 11 8.2 x 11 5 x 11 5 x 11 8.2 x 11 8.2 x 11 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 8.2 x 11 5 x 11 5 x 11 8.2 x 11 8.2 x 11 8.2 x 11 8.2 x 11 8.2 x 11 8.2 x 11 Revision: 26-Apr-16 IR IL2 100 Hz tan 2 min 85 °C 100 Hz (μA) (mA) 130 300 95 150 260 400 90 160 230 280 390 140 210 310 87 130 270 72 180 60 110 160 250 25 38 45 55 70 120 80 100 150 160 190 210 80 110 7 16 6 12 17 31 7 13 18 24 35 13 18 36 8 13 35 7 20 6 13 18 33 4 5 5 6 7 7 9 11 11 16 21 29 9 16 0.20 0.20 0.16 0.20 0.16 0.20 0.14 0.16 0.14 0.16 0.16 0.14 0.12 0.14 0.10 0.12 0.12 0.10 0.10 0.08 0.10 0.08 0.10 0.06 0.06 0.06 0.06 0.06 0.04 0.07 0.08 0.05 0.06 0.07 0.08 0.06 0.06 Z 10 kHz () 1.7 0.52 2.8 1.3 0.59 0.43 2.7 1.6 0.6 0.55 0.48 1.8 0.7 0.55 2.7 1.9 0.6 3.7 0.81 4.5 2.1 0.96 0.7 18 12 8.5 5.9 4.0 2.8 3.1 2.7 1.4 1.2 1.0 0.88 3.5 1.8 ORDERING CODE MAL2036....... BULK PACKAGING TAPED AMMOPACK LONG LEADS CUT LEADS FORM F FORM F FORM F FORM F CA (mm) CB (mm) TFA (mm) TNA (mm) 53101E3 2.5 33101E3 5.0 73101E3 2.5 53331E3 5.0 63331E3 5.0 33331E3 5.0 54479E3 2.5 34479E3 5.0 74479E3 2.5 54151E3 2.5 34151E3 5.0 74151E3 2.5 54221E3 5.0 64221E3 5.0 34221E3 5.0 54471E3 5.0 64471E3 5.0 34471E3 5.0 55339E3 2.5 35339E3 5.0 75339E3 2.5 55101E3 2.5 35101E3 5.0 75101E3 2.5 55151E3 5.0 65151E3 5.0 35151E3 5.0 55221E3 5.0 65221E3 5.0 35221E3 5.0 55331E3 5.0 65331E3 5.0 35331E3 5.0 56689E3 2.5 36689E3 5.0 76689E3 2.5 56101E3 5.0 66101E3 5.0 36101E3 5.0 56221E3 5.0 66221E3 5.0 36221E3 5.0 90001E3 2.5 90027E3 5.0 90389E3 2.5 90094E3 2.5 90098E3 5.0 90391E3 2.5 90099E3 5.0 90101E3 5.0 90103E3 5.0 57159E3 2.5 37159E3 5.0 77159E3 2.5 57689E3 5.0 67689E3 5.0 37689E3 5.0 90004E3 2.5 90028E3 5.0 90392E3 2.5 90104E3 2.5 90108E3 5.0 90393E3 2.5 90011E3 5.0 90012E3 5.0 90031E3 5.0 90109E3 5.0 90111E3 5.0 90113E3 5.0 58228E3 2.5 38228E3 5.0 78228E3 2.5 58338E3 2.5 38338E3 5.0 78338E3 2.5 58478E3 2.5 38478E3 5.0 78478E3 2.5 58688E3 2.5 38688E3 5.0 78688E3 2.5 58109E3 2.5 38109E3 5.0 78109E3 2.5 90036E3 5.0 90041E3 5.0 90181E3 5.0 58159E3 2.5 38159E3 5.0 78159E3 2.5 58229E3 2.5 38229E3 5.0 78229E3 2.5 90117E3 5.0 90118E3 5.0 90139E3 5.0 58339E3 5.0 68339E3 5.0 38339E3 5.0 58479E3 5.0 68479E3 5.0 38479E3 5.0 58689E3 5.0 68689E3 5.0 38689E3 5.0 59109E3 5.0 69109E3 5.0 39109E3 5.0 59229E3 5.0 69229E3 5.0 39229E3 5.0 - Document Number: 28312 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 036 RSP www.vishay.com Vishay BCcomponents ADDITIONAL ELECTRICAL DATA PARAMETER Voltage Surge voltage Reverse voltage Current CONDITIONS VALUE Us 1.15 UR Urev 1 V After 1 min UR = 6.3 V to 100 V After 5 min UR = 6.3 V to 100 V Leakage current IL1 0.006 CR x UR + 3 μA IL5 0.001 CR x UR + 3 μA Inductance Case Ø D x L = 5 mm x 11 mm Case Ø D x L = 8.2 mm x 11 mm Typ. 13 nH Typ. 16 nH Calculated from tan max. and CR (see Table 2) ESR = tan /2 f CR Equivalent series inductance (ESL) Resistance Equivalent series resistance (ESR) CAPACITANCE (C) 1.1 C C0 1.0 5 1 C C0 1.1 1.0 0.9 1 2 3 0.8 1 3 4 5 0.9 0.8 Curve 1: 63 V Curve 2: 50 V Curve 3: 35 V; 40 V; 100 V Curve 4: 16 V; 25 V Curve 5: 6.3 V; 10 V 5 0.5 -60 -40 -20 0 20 40 60 C0 = Capacitance at 20 °C, 100 Hz 0.7 0.6 0.5 80 Tamb (°C) 6 Curve 1: 63 V (2.2 µF) Curve 2: 63 V (> 2.2 µF) Curve 3: 50 V Curve 4: 35 V; 40 V; 100 V Curve 5: 25 V Curve 6: 16 V Curve 7: 6.3 V; 10 V 4 0.7 0.6 2 102 10 7 103 104 f (Hz) C0 = Capacitance at 20 °C, 100 Hz Fig. 6 - Typical multiplier of capacitance as a function of ambient temperature 105 Tamb = 20 °C Fig. 7 - Typical multiplier of capacitance as a function of ambient temperature IMPEDANCE (Z) Curve 1: 2.2 µF Curve 2: 3.3 µF Curve 3: 4.7 µF Curve 4: 6.8 µF Curve 5: 10 µF Curve 6: 15 µF Curve 7: 22 µF Curve 8: 33 µF Curve 9: 47 µF Curve 10: 68 µF Curve 11: 100 µF Curve 12: 150 µF 103 Z (Ω) 1 2 3 4 5 6 7 8 9 10 11 12 102 10 103 Z (Ω) 102 55 66 77 88 99 10 10 11 11 12 12 13 13 10 1 1 2 3 4 Curve 1: 2.2 µF Curve 2: 4.7 µF Curve 3: 10 µF, 100 V Curve 4: 10 µF, 63 V Curve 5: 22 µF, 63 V Curve 6: 33 µF Curve 7: 47 µF Curve 8: 68 µF Curve 9: 100 µF Curve 10: 150 µF Curve 11: 220 µF Curve 12: 330 µF Curve 13: 470 µF 1 102 103 Case Ø D x L = 5 mm x 11 mm 104 105 f (Hz) Tamb = 20 °C Fig. 8 - Typical impedance as a function of frequency Revision: 26-Apr-16 106 102 103 Case Ø D x L = 8.2 mm x 11 mm 104 105 f (Hz) 106 Tamb = 20 °C Fig. 9 - Typical impedance as a function of frequency Document Number: 28312 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 036 RSP www.vishay.com Vishay BCcomponents RIPPLE CURRENT AND USEFUL LIFE CCC205 3.3 IA 3.2 IR 3.1 3.0 2.8 2.6 2.4 Lifetime multiplier 2.2 0 1. 5 1. 2.0 0 2. 0 3. 0 4. 1.8 10 30 Useful life at 85 °C and IR applied: 3000 h (1) 50 0 7 (1) 1.4 1.2 1.0 0.8 0.5 0.0 15 20 IA = Actual ripple current at 100 Hz IR = Rated ripple current at 100 Hz, 85 °C 0 6. 1.6 40 50 60 70 80 90 100 Tamb (°C) Fig. 10 - Multiplier of useful life as a function of ambient temperature and ripple current load Table 3 MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY FREQUENCY (Hz) IR MULTIPLIER UR = 16 V TO 35 V 0.85 1.00 1.20 1.30 1.35 1.40 UR = 6.3 V TO 10 V 0.90 1.00 1.12 1.20 1.25 1.30 50 100 300 1000 3000 10 000 UR = 40 V TO 100 V 0.80 1.00 1.25 1.40 1.50 1.60 Table 4 TEST PROCEDURES AND REQUIREMENTS TEST NAME OF TEST Endurance PROCEDURE (quick reference) REFERENCE IEC 60384-4 / EN130300 subclause 4.13 REQUIREMENTS Tamb = 85 °C; UR applied; 2000 h UR 6.3 V; C/C: +15 %/-30 % UR > 6.3 V; C/C: ± 15 % tan 1.3 x spec. limit Z 2 x spec. limit IL5 spec. limit Useful life CECC 30301 subclause 1.8.1 Tamb = 85 °C; UR and IR applied; 3000 h UR 6.3 V; C/C: +45 %/-50 % UR > 6.3 V; C/C: ± 45 % tan 3 x spec. limit Z 3 x spec. limit IL5 spec. limit No short or open circuit Total failure percentage: 1 % Shelf life (storage at high temperature) IEC 60384-4 / EN130300 subclause 4.17 Tamb = 85 °C; no voltage applied; 500 h After test: UR to be applied for 30 min, 24 h to 48 h before measurement C/C, tan , Z: for requirements see “Endurance test” above IL5 spec. limit Revision: 26-Apr-16 Document Number: 28312 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000