116 RLL www.vishay.com Vishay BCcomponents Aluminum Electrolytic Capacitors Radial Long Life FEATURES • • • • 048 RML miniaturized 148 RUS higher CV-values 036 RSP 85 °C APPLICATIONS • Automotive, telecommunication, industrial and EDP • Stand-by applications in audio and video equipment • Coupling, decoupling, timing, smoothing, filtering and buffering in DC/DC converters • Portable and mobile equipment (small size, low mass) 116 RLL 105 °C Fig. 1 QUICK REFERENCE DATA DESCRIPTION Nominal case sizes (Ø D x L in mm) Rated capacitance range, CR Tolerance on CR Rated voltage range, UR Category temperature range Endurance test at 105 °C Endurance test at 85 °C Useful life at 105 °C Useful life at 40 °C, 1.3 x IR applied Shelf life at 0 V, 105 °C Based on sectional specification Climatic category IEC 60068 Long useful life: 2000 h at 105 °C Miniaturized, high CV-product per unit volume Natural pitch 2.5 mm and 5 mm Polarized aluminum electrolytic capacitors, non-solid electrolyte • Radial leads, cylindrical aluminum case, all-insulated (light blue) • Charge and discharge proof • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 VALUE 5 x 11 and 8.2 x 11 1.5 μF to 470 μF ± 20 % 6.3 V to 100 V -55 °C to +105 °C 1500 h 5000 h 2000 h 200 000 h 1500 h IEC 60384-4 / EN 130300 55/105/56 MARKING The capacitors are marked (where possible) with the following information: • Rated capacitance (in μF) • Tolerance on rated capacitance, code letter in accordance with IEC 60062 (M for ± 20 %) • Rated voltage (in V) • Date code in accordance with IEC 60062 • Code indicating factory of origin • Name of manufacturer • “-”-sign on top to identify the negative terminal • Series number (116) SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm) CR (μF) 1.5 3.3 4.7 6.8 10 15 22 33 47 68 100 150 220 330 470 6.3 5 x 11 8.2 x 11 Revision: 26-Apr-16 10 5 x 11 8.2 x 11 - 16 5 x 11 8.2 x 11 - 25 5 x 11 8.2 x 11 - UR (V) 35 5 x 11 8.2 x 11 - 40 5 x 11 8.2 x 11 - 50 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 8.2 x 11 5 x 11 5 x 11 8.2 x 11 8.2 x 11 8.2 x 11 8.2 x 11 - 63 8.2 x 11 8.2 x 11 - 100 8.2 x 11 8.2 x 11 - Document Number: 28316 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 116 RLL www.vishay.com Vishay BCcomponents DIMENSIONS in millimeters AND AVAILABLE FORMS ØD L - + 15 min F Case Ø D x L = 5 mm x 11 mm and 8.2 mm x 11 mm Pitch F = 5 mm 5 min Ød Fig. 2 - Form CA: Long leads Fig. 3 - Form TFA: Taped in box (ammopack) ØD L +1 4 0 - + Ød 5 ± 0.5 Case Ø D x L = 5 mm x 11 mm only Pitch F = 2.5 mm Case Ø D x L = 8.2 mm x 11 mm only Fig. 4 - Form CB: Cut leads Fig. 5 - Form TNA: Taped in box (ammopack) Table 1 DIMENSIONS in millimeters, MASS, AND PACKAGING QUANTITIES PACKAGING QUANTITIES NOMINAL CASE SIZE ØDxL CASE CODE Ød Ø Dmax. Lmax. F MASS (g) 5 x 11 11 0.5 5.5 12 2.5 ± 0.5 8.2 x 11 13 0.6 8.7 12 5.0 ± 0.5 FORM CA, CB FORM TFA, TNA 0.4 1000 2000 1.1 1000 1000 Note • For detailed tape dimension please see www.vishay.com/doc?28360 Revision: 26-Apr-16 Document Number: 28316 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 116 RLL www.vishay.com Vishay BCcomponents ORDERING EXAMPLE ELECTRICAL DATA Electrolytic capacitor 116 series SYMBOL DESCRIPTION CR Rated capacitance at 100 Hz, tolerance ± 20 % IR Rated RMS ripple current at 100 kHz, 105 °C IL1 Max. leakage current after 1 min at UR tan Z 220 μF/16 V; ± 20 % Nominal case size: Ø 8.2 mm x 11 mm; form TFA Ordering code: MAL211635221E3 Former 12NC: 2222 116 35221 Max. dissipation factor at 100 Hz Max. impedance at 100 kHz and 20 °C Note • Unless otherwise specified, all electrical values in Table 2 apply at Tamb = 20 °C, P = 86 kPa to 106 kPa, RH = 45 % to 75 %. Table 2 ELECTRICAL DATA AND ORDERING INFORMATION ORDERING CODE MAL2116 ..... UR (V) 6.3 10 16 25 35 40 50 63 100 IR NOMINAL IL1 Z CR CASE SIZE 100 kHz tan 100 Hz 1 min 100 kHz 105 °C ØDxL 100 Hz (μF) (μA) () (mA) (mm) BULK PACKAGING LONG LEADS FORM CA F (mm) CUT LEADS FORM CB F (mm) TAPED AMMOPACK FORM TFA F (mm) FORM TNA F (mm) 150 5 x 11 130 8.7 0.25 1.3 53151E3 2.5 - - 33151E3 5.0 73151E3 2.5 470 8.2 x 11 300 21 0.25 0.45 53471E3 5.0 63471E3 5.0 33471E3 5.0 - - 100 5 x 11 130 9.0 0.20 1.4 54101E3 2.5 - - 34101E3 5.0 74101E3 2.5 330 8.2 x 11 280 23 0.20 0.45 54331E3 5.0 64331E3 5.0 34331E3 5.0 - - 68 5 x 11 130 9.5 0.16 1.5 55689E3 2.5 - - 35689E3 5.0 75689E3 2.5 220 8.2 x 11 280 24 0.16 0.5 55221E3 5.0 65221E3 5.0 35221E3 5.0 - - 47 5 x 11 120 10 0.14 1.6 56479E3 2.5 - - 36479E3 5.0 76479E3 2.5 150 8.2 x 11 260 26 0.14 0.5 56151E3 5.0 66151E3 5.0 36151E3 5.0 - - 33 5 x 11 110 9.9 0.12 1.7 50339E3 2.5 - - 30339E3 5.0 70339E3 2.5 100 8.2 x 11 240 24 0.12 0.55 50101E3 5.0 60101E3 5.0 30101E3 5.0 - 2.5 33 5 x 11 110 10.9 0.12 1.7 57339E3 2.5 - - 37339E3 5.0 77339E3 100 8.2 x 11 240 27 0.12 0.55 57101E3 5.0 67101E3 5.0 37101E3 5.0 - - 1.5 5 x 11 50 3.5 0.09 4.0 51158E3 2.5 - 5.0 31158E3 5.0 71158E3 2.5 2.2 5 x 11 60 3.7 0.09 3.5 51228E3 2.5 - 5.0 31228E3 5.0 71228E3 2.5 3.3 5 x 11 65 4.0 0.09 3.1 51338E3 2.5 - 5.0 31338E3 5.0 71338E3 2.5 4.7 5 x 11 70 4.4 0.09 2.8 51478E3 2.5 - 5.0 31478E3 5.0 71478E3 2.5 6.8 5 x 11 75 5.0 0.09 2.5 51688E3 2.5 - 5.0 31688E3 5.0 71688E3 2.5 10 5 x 11 80 6.0 0.09 2.2 51109E3 2.5 - 5.0 31109E3 5.0 71109E3 2.5 10 8.2 x 11 160 6.0 0.05 1.0 90084E3 5.0 90085E3 5.0 90036E3 5.0 - - 15 5 x 11 90 7.5 0.09 2.0 51159E3 2.5 - 5.0 31159E3 5.0 71159E3 2.5 22 5 x 11 110 9.6 0.09 1.9 51229E3 2.5 - 5.0 31229E3 5.0 71229E3 2.5 22 8.2 x 11 190 9.6 0.06 0.9 90025E3 5.0 90086E3 5.0 90039E3 5.0 - - 33 8.2 x 11 190 13 0.09 0.77 51339E3 5.0 61339E3 5.0 31339E3 5.0 - - 47 8.2 x 11 210 17 0.09 0.65 51479E3 5.0 61479E3 5.0 31479E3 5.0 - - 68 8.2 x 11 240 23 0.09 0.55 51689E3 5.0 61689E3 5.0 31689E3 5.0 - - 10 8.2 x 11 160 7.0 0.06 1.3 58109E3 5.0 68109E3 5.0 38109E3 5.0 - - 22 8.2 x 11 190 11 0.06 0.9 58229E3 5.0 68229E3 5.0 38229E3 5.0 - 4.7 8.2 x 11 75 5.8 0.07 3.5 59478E3 5.0 69478E3 5.0 39478E3 5.0 - - 10 8.2 x 11 100 9.0 0.08 3.0 59109E3 5.0 69109E3 5.0 39109E3 5.0 - - Revision: 26-Apr-16 Document Number: 28316 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 116 RLL www.vishay.com Vishay BCcomponents ADDITIONAL ELECTRICAL DATA PARAMETER CONDITIONS VALUE Voltage Us 1.3 UR Surge voltage Urev 1 V Reverse voltage Current Leakage current After 1 min at UR IL1 0.006 CR x UR + 3 μA After 5 min at UR IL5 0.001 CR x UR + 3 μA Inductance Case Ø D x L = 5 mm x 11 mm Typ. 13 nH Case Ø D x L = 8.2 mm x 11 mm Typ. 16 nH Calculated from tan max. and CR (see Table 2) ESR = tan /2 f CR Equivalent series inductance (ESL) Resistance Equivalent series resistance (ESR) CAPACITANCE (C) 1 1.1 C C0 1.0 2 3 4 7 1 1.0 C C0 1 2 3 0.9 0.9 4 0.8 3 4 5 Curve 1: 50 V (≤ 2.2 µF) Curve 2: 50 V (> 2.2 µF) Curve 3: 50 V (≥ 15 µF) Curve 4: 35 V, 40 V, 63 V, 100 V Curve 5: 25 V Curve 6: 16 V Curve 7: 6.3 V, 10 V 0.8 2 0.7 Curve 1: 6.3 V Curve 2: 10 V, 16 V Curve 3: 35 V, 40 V, 63 V, 100 V Curve 4: 50 V 1 0.6 - 60 - 40 - 20 0 20 40 60 80 100 10 2 10 120 Tamb (°C) C0 = Capacitance at 20 °C, 100 Hz 0.7 6 7 10 3 10 4 C0 = Capacitance at 20 °C, 100 Hz Fig. 6 - Typical multiplier of capacitance as a function of ambient temperature f (Hz) 10 5 Tamb (°C) Fig. 7 - Typical multiplier of capacitance as a function of ambient frequency IMPEDANCE (Z) 103 Curve 1: 1.5 µF Curve 2: 2.2 µF Curve 3: 3.3 µF Curve 4: 4.7 µF Curve 5: 6.8 µF Curve 6: 10 µF Curve 7: 15 µF Curve 8: 22 µF 103 1 2 3 4 5 6 7 8 Z (Ω) 102 Curve 1: 2.2 µF Curve 2: 4.7 µF Curve 3: 10 µF, 100 V Curve 4: 10 µF, 50 V Curve 5: 22 µF, 50 V Curve 6: 33 µF Curve 7: 47 µF Curve 8: 68 µF Curve 9: 100 µF Z (Ω) 102 5 6 7 8 9 10 11 12 13 10 10 1 1 2 3 4 1 10-1 102 103 Case Ø D x L = 5 mm x 11 mm 104 105 6 f (Hz) 10 Tamb (°C) Fig. 8 - Typical impedance as a function of frequency Revision: 26-Apr-16 102 103 Case Ø D x L = 8.2 mm x 11 mm 104 105 106 f (Hz) Tamb (°C) Fig. 9 - Typical impedance as a function of frequency Document Number: 28316 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 116 RLL www.vishay.com Vishay BCcomponents RIPPLE CURRENT AND USEFUL LIFE MEA240 3.8 IA 3.7 IR 3.6 3.5 3.4 3.3 3.2 3.1 3.0 2.8 Lifetime multiplier 2.6 0 1. 2.4 5 1. 0 2. 2.2 0 3. 0 4. 2.0 0 6. 0 8. 12 20 30 60 (1) (1) 0 10 0 15 0 20 IA = Actual ripple current at 100 Hz IR = Rated ripple current at 100 Hz, 105 °C 1.8 1.6 1.4 1.2 1.0 0.8 0.5 0.0 40 50 60 70 80 90 Useful life at 105 °C and IR applied: 2000 h 100 110 Tamb (°C) Fig. 10 - Multiplier of useful life as a function of ambient temperature and ripple current load Table 3 MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY FREQUENCY (Hz) 50 100 300 1000 3000 10K to 100K UR = 6.3 V TO 10 V 0.70 0.77 0.86 0.92 0.96 1.00 IR MULTIPLIER UR = 16 V TO 35 V 0.60 0.71 0.85 0.93 0.96 1.00 UR = 40 V TO 100 V (CR 10 μF) 0.50 0.63 0.78 0.88 0.94 1.00 Table 4 TEST PROCEDURES AND REQUIREMENTS TEST NAME OF TEST REFERENCE PROCEDURE (quick reference) Endurance IEC 60384-4 / EN 130300 subclause 4.13 Tamb = 105 °C; UR applied; 1500 h Useful life CECC 30301 subclause 1.8.1 Tamb = 105 °C; UR and IR applied; 2000 h Shelf life (storage at high temperature) IEC 60384-4 / EN 130300 subclause 4.17 Tamb = 105 °C; no voltage applied; 1500 h After test: UR to be applied for 30 min, 24 h to 48 h before measurement Revision: 26-Apr-16 REQUIREMENTS UR 6.3 V; C/C: +15 %/-30 % UR > 6.3 V; C/C: ± 15 % tan 1.3 x spec. limit Z 2 x spec. limit IL5 spec. limit UR 6.3 V; C/C: +45 %/-50 % UR > 6.3 V; C/C: ± 45 % tan 3 x spec. limit Z 3 x spec. limit IL5 spec. limit no short or open circuit total failure percentage: 1% C/C, tan , Z: For requirements see “Endurance test” above IL5 2 x spec. limit Document Number: 28316 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000