Datenblatt

CX9SM AT CRYSTAL
13.5 MHz to 250 MHz
Ultra-Miniature Surface Mount AT Quartz Crystal
DESCRIPTION
Designed and manufactured in the USA, Statek’s CX9SM
AT quartz crystal is the newest device available in frequencies
ranging from 13.5 MHz to 250 MHz. This device has been
specifically designed for applications requiring a very small
foot print and low profile. It is 4.1 mm x 1.5 mm with a height
under 1 mm. Using micro-machining processes, this surfacemountable crystal is hermetically sealed within an ultraminiature ceramic package to ensure high stability and low
aging. Tight calibration and excellent frequency/temperature
stability make the CX9SM ideally suited for many high
frequency applications.
ceramic lid
PACKAGE DIMENSIONS
FEATURES
A
Low profile (less than 1 mm)
TOP
BOTTOM
High shock and vibration survival
D
Ultra-miniature, surface mount design
B
Available with glass or ceramic lid
C
Hermetically sealed ceramic package
Excellent aging characteristics
TYPICAL
Designed for low power applications
Full military testing available
Designed, manufactured and tested in the USA
MAXIMUM
DIM
inches
mm
inches
mm
A
0.160
4.10
0.170
4.32
0.068
1.73
B
0.060
1.50
APPLICATIONS
C
-
-
Medical
D
0.031
0.79
see below
0.038
0.97
Medical RF Telemetry
Cardiac Rhythm Management
Cochlear Implants
THICKNESS (DIM C) MAXIMUM
Infusion Pump
CERAMIC
Industrial & Communications
Down-hole Data Recorder
Process Control
Environmental Control
GLASS
inches
mm
inches
mm
SM1
0.035
0.90
0.034
0.87
SM2/SM4
0.035
0.90
0.034
0.87
SM3/SM5
0.037
0.94
0.036
0.91
Telemetry
Ruggedized Instrumentation
Military & Aerospace
Smart Munitions
Missile Telemetry
Ruggedized Communications
Aviation Equipment
10158 - Rev C
STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com
SPECIFICATIONS
TERMINATIONS
Specifications are typical at 25OC unless otherwise noted.
Specifications are subject to change without notice.
Designation
SM1
SM2
SM3
SM4
SM5
Fundamental Frequency 14.7456 MHz 24 MHz 49 MHz
Motional Resistance R1(Ω)
65
30
30
Motional Capacitance C1 (fF)
1.2
1.6
2.1
Quality Factor Q (k)
140
150
60
Shunt Capacitance C0 (pF)
0.6
0.8
1.0
Calibration Tolerance1
+
_
Load Capacitance
10 pF
Drive Level
200 µW MAX for f ≤ 50 MHz
Termination
Gold Plated
Solder Plated
Solder Dipped
Solder Plated (Lead Free)
Solder Dipped (Lead Free)
Max Process Temperature 260OC for 20 sec.
100 ppm, or tighter as required
SUGGESTED LAND PATTERN
(unless specified otherwise)
0.048 (1.22)
100 µW MAX for f > 50 MHz
Frequency-Temperature
Stability1,3
+
_
50 ppm to +_ 10 ppm (Commercial)
+
_
100 ppm to +_ 20 ppm (Industrial)
+
_
0.080
(2.03)
+
_
100 ppm to 30 ppm (Military)
Aging, first year
5 ppm MAX (better than 1 ppm available)
Shock, survival
100,000 g, 0.3 ms, 1/2 sine
Vibration, survival4
20 g, 10-2,000 Hz swept sine
Operating Temp. Range
-10OC to +70OC (Commercial)
-40OC to +85OC (Industrial)
-55OC to +125OC (Military)
Storage Temp. Range
-55OC to +125OC
3
0.132 (3.35)
inches (mm)
EQUIVALENT CIRCUIT
C0
Max Process Temperature 260OC for 20 sec.
1. Other tolerances available. Contact factory.
2. Does not include calibration tolerance. The characteristics of the frequency stability over
temperature follow that of the AT thickness-shear mode.
3. 5 ppm MAX for frequencies below 40 MHz. For tighter tolerances and higher frequencies
contact factory.
4. Per MIL-STD-202G, Method 204D, Condition D. Random vibration testing also available.
1
L1
C1
R1
2
R1 Motional Resistance L1 Motional Inductance
C1 Motional Capacitance C0 Shunt Capacitance
PACKAGING OPTIONS
• Tray Pack
• 16mm tape, 7” or 13” reels
Per EIA 481 (see Tape and Reel data sheet 10109)
HOW TO ORDER CX9SM AT CRYSTALS
CX9
S
“S” if special or
custom design.
Blank if Std.
HG
HG = High
Shock
C
C=
Ceramic Lid
Blank =
Glass Lid
SM1
–
SM1 = Gold Plated
SM2 = Solder Plated
SM3 = Solder Dipped
SM4 = Solder Plated
Lead Free
SM5 = Solder Dipped
Lead Free
49.0M
,
Frequency
M = MHz
100
/
Calibration
Tolerance
@ 250C
(in ppm)
100
/
—
Temp. Range:
C = -10OC to +70OC
I = -40OC to +85OC
M = -55OC to +125OC
S = Customer Specified
Frequency
Stability over
Temp.Range
(in ppm)
OR
—
/
—
/
200
Total
Frequency
Tolerance
(in ppm)
I
/
/
I
Operating Temp. Range:
C = -10OC to +70OC
I = -40OC to +85OC
M = -55OC to +125OC
S = Customer Specified
10158 - Rev C
STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com