53D Datasheet

53D
www.vishay.com
Vishay Sprague
Aluminum Capacitors
+85 °C, Tubular, Axial Lead, General Purpose
FEATURES
• General purpose capacitor
• Rugged construction
Available
• Largest CV ratings in axial leaded capacitor
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
QUICK REFERENCE DATA
RIPPLE CURRENT MULTIPLIERS
DESCRIPTION
VALUE
Nominal case size 
Ø D x L in mm
Operating temperature
MULTIPLIERS
+75 °C
1.4
+65 °C
1.7
+45 °C and below
2.0
FREQUENCY (Hz)
-40 °C to +85 °C
WVDC
50 TO 60
300 TO 400
1000 AND UP
-10 %, +50 %; -10 %, +75 %
0 to 50
0.85
1.10
1.15
6.3 WVDC to 450 WVDC
51 to 299
0.85
1.15
1.20
Axial leads
300 to up
0.80
1.30
1.40
Rated voltage range, UR
Termination
Life validation test at 85 °C
1000 h: CAP  15 % from initial
measurement.
ESR  1.5 x initial specified limit.
DCL  initial specified limit.
Shelf life at 85 °C
500 h: CAP  10 % from initial
measurement.
ESR  1.3 x initial specified limit.
DCL  2.0 x initial specified limit.
DC leakage current
(after 5 min charge)
AMBIENT TEMPERATURE
15 μF to 220 000 μF
Rated capacitance range, CR
Tolerance on CR
TEMPERATURE
0.75" x 1.125"
[19.05 x 28.575]
to
1.375" x 4.125"
[34.925 x 104.775]
LOW TEMPERATURE PERFORMANCE
CAPACITANCE RATIO C-40 °C/C+25 °C MINIMUM AT 120 Hz
Rated Voltage (WVDC)
I = k CV
k = 6.0 at +25 °C;
k = 36.0 at +85 °C
I in μA, C in μF, V in Volts
Capacitance Remaining
0 to 40
35
41 to 63
45
64 to 100
60
101 to 350
20
351 to 450
15
ESR RATIO ESR-40 °C/ESR+25 °C MAXIMUM AT 120 Hz
Rated Voltage (WVDC)
Multiplier
0 to 40
60
41 to 63
55
64 to 100
65
101 to 350
180
351 to 450
190
DIMENSIONS in inches [millimeters]
CASE
CODE
STYLE 6 AND 7
D
L
TYPICAL
WEIGHT
CASE
CODE
GE
0.760 ± 0.020
[19.3 ± 0.51]
1.141 ± 0.062
[29.0 ± 1.58]
0.46 oz.
(13 g)
GJ
0.760 ± 0.020
[19.3 ± 0.51]
1.641 ± 0.062
[41.7 ± 1.58]
GS
0.760 ± 0.020
[19.3 ± 0.51]
GT
HE
STYLE 6 AND 7
D
L
TYPICAL
WEIGTH
GL
0.760 ± 0.020
[19.3 ± 0.51]
2.141 ± 0.062
[54.4 ± 1.58]
0.74 oz.
(21 g)
0.67 oz.
(19 g)
GP
0.760 ± 0.020
[19.3 ± 0.51]
2.641 ± 0.062
[67.1 ± 1.58]
0.88 oz.
(25 g)
3.141 ± 0.062
[79.8 ± 1.58]
1.16 oz.
(33 g)
KS
1.135 ± 0.020
[28.8 ± 0.51]
3.141 ± 0.062
[79.8 ± 1.58]
2.54 oz.
(72 g)
0.760 ± 0.020
[19.3 ± 0.51]
3.641 ± 0.062
[92.5 ± 1.58]
1.34 oz.
(38 g)
KT
1.135 ± 0.020
[28.8 ± 0.51]
3.641 ± 0.062
[92.5 ± 1.58]
2.96 oz.
(84 g)
0.885 ± 0.020
[22.5 ± 0.51]
1.141 ± 0.062
[29.0 ± 1.58]
0.63 oz.
(18 g)
KD
1.135 ± 0.020
[28.8 ± 0.51]
4.141 ± 0.062
[105.2 ± 1.58]
3.35 oz.
(95 g)
Revision: 04-Nov-13
Document Number: 42037
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
53D
www.vishay.com
Vishay Sprague
DIMENSIONS in inches [millimeters]
CASE
CODE
HJ
HL
HP
HS
HT
JE
JJ
JL
JP
JS
JT
KE
KJ
KL
KP
STYLE 6 AND 7
D
L
TYPICAL
WEIGHT
0.885 ± 0.020
[22.5 ± 0.51]
0.885 ± 0.020
[22.5 ± 0.51]
0.885 ± 0.020
[22.5 ± 0.51]
0.885 ± 0.020
[22.5 ± 0.51]
0.885 ± 0.020
[22.5 ± 0.51]
1.010 ± 0.020
[25.7 ± 0.51]
1.010 ± 0.020
[25.7 ± 0.51]
1.010 ± 0.020
[25.7 ± 0.51]
1.010 ± 0.020
[25.7 ± 0.51]
1.010 ± 0.020
[25.7 ± 0.51]
1.010 ± 0.020
[25.7 ± 0.51]
1.135 ± 0.020
[28.8 ± 0.51]
1.135 ± 0.020
[28.8 ± 0.51]
1.135 ± 0.020
[28.8 ± 0.51]
1.135 ± 0.020
[28.8 ± 0.51]
1.641 ± 0.062
[41.7 ± 1.58]
2.141 ± 0.062
[54.4 ± 1.58]
2.641 ± 0.062
[67.1 ± 1.58]
3.141 ± 0.062
[79.8 ± 1.58]
3.641 ± 0.062
[92.5 ± 1.58]
1.141 ± 0.062
[29.0 ± 1.58]
1.641 ± 0.062
[41.7 ± 1.58]
2.141 ± 0.062
[54.4 ± 1.58]
2.641 ± 0.062
[67.1 ± 1.58]
3.141 ± 0.062
[79.8 ± 1.58]
3.641 ± 0.062
[92.5 ± 1.58]
1.141 ± 0.062
[29.0 ± 1.58]
1.641 ± 0.062
[41.7 ± 1.58]
2.141 ± 0.062
[54.4 ± 1.58]
2.641 ± 0.062
[67.1 ± 1.58]
0.95 oz.
(27 g)
1.02 oz.
(29 g)
1.38 oz.
(39 g)
1.73 oz.
(49 g)
2.08 oz.
(59 g)
0.81 oz.
(23 g)
1.02 oz.
(29 g)
1.55 oz.
(44 g)
1.87 oz.
(53 g)
2.22 oz.
(63 g)
2.54 oz.
(72 g)
0.92 oz.
(26 g)
1.31 oz.
(37 g)
1.73 oz.
(49 g)
2.15 oz.
(61 g)
STYLE 6 AND 7
CASE
CODE
LE
LJ
LL
LP
LS
LT
LD
ME
MJ
ML
MP
MS
MT
MD
D
L
TYPICAL
WEIGTH
1.260 ± 0.020
[32.0 ± 0.51]
1.260 ± 0.020
[32.0 ± 0.51]
1.260 ± 0.020
[32.0 ± 0.51]
1.260 ± 0.020
[32.0 ± 0.51]
1.260 ± 0.020
[32.0 ± 0.51]
1.260 ± 0.020
[32.0 ± 0.51]
1.260 ± 0.020
[32.0 ± 0.51
1.375 ± 0.020
[34.9 ± 0.51]
1.375 ± 0.020
[34.9 ± 0.51]
1.375 ± 0.020
[34.9 ± 0.51]
1.375 ± 0.020
[34.9 ± 0.51]
1.375 ± 0.020
[34.9 ± 0.51]
1.375 ± 0.020
[34.9 ± 0.51]
1.375 ± 0.020
[34.9 ± 0.51]
1.141 ± 0.062
[29.0 ± 1.58]
1.641 ± 0.062
[41.7 ± 1.58]
2.141 ± 0.062
[54.4 ± 1.58]
2.641 ± 0.062
[67.1 ± 1.58]
3.141 ± 0.062
[79.8 ± 1.58]
3.641 ± 0.062
[92.5 ± 1.58]
4.141 ± 0.062
[105.2 ± 1.58]
1.141 ± 0.062
[29.0 ± 1.58]
1.641 ± 0.062
[41.7 ± 1.58]
2.141 ± 0.062
[54.4 ± 1.58]
2.641 ± 0.062
[67.1 ± 1.58]
3.141 ± 0.062
[79.8 ± 1.58]
3.641 ± 0.062
[92.5 ± 1.58]
4.141 ± 0.062
[105.2 ± 1.58]
1.13 oz.
(32 g)
1.62 oz.
(46 g)
2.11 oz.
(60 g)
2.65 oz.
(75 g)
3.14 oz.
(89 g)
3.63 oz.
(103 g)
4.16 oz.
(118 g)
1.38 oz.
(39 g)
1.98 oz.
(56 g)
2.57 oz.
(73 g)
3.21 oz.
(91 g)
3.81 oz.
(108 g)
4.44 oz.
(126 g)
5.04 oz.
(143 g)
-
-
-
-
DIMENSIONS AND AVAILABLE FORMS
L
CL
D
63.50
min.
PVC sleeve
63.50
min.
Lead diameter
No. 18 AWG (0.040" [1.016 mm] Dia.)
ORDERING EXAMPLE
Electrolytic capacitor 53D series: 53D 282 G 025 GJ 6
DESCRIPTION
CODE
53D
282
G
025
GJ
6
EXPLANATION
Product type
Capacitance value (2800 μF)
Tolerance (G = -10 %/+75 %; F = -10 %/+50 %)
Voltage rating at 85 °C (025 = 25 V)
Can size (see Dimensions table)
Sleeve and sealing (6 = P.V.C. sleeve)
Note
• For lead (Pb)-free/RoHS compliant products add suffix “E3” to part number.
Example: 53D282G025GJ6E3
Revision: 04-Nov-13
Document Number: 42037
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
53D
www.vishay.com
Vishay Sprague
ELECTRICAL DATA AND ORDERING INFORMATION
MAX. ESR AT +25 °C
120 Hz
(m)
MAX. RMS RIPPLE AT +85 °C
120 Hz
(mA)
CAPACITANCE
(μF)
CASE
CODE
PART NUMBER
6900.0
HJ
53D692G016HJ6
73
2150
10 000.0
HL
53D103G016HL6
52
2840
2800.0
GJ
53D282G025GJ6
16 WVDC AT +85 °C, SURGE = 18 V
25 WVDC AT +85 °C, SURGE = 35 V
103
1650
4300.0
HJ
53D432G025HJ6
72
2170
6200.0
HL
53D622G025HL6
51
2870
11 000.0
JP
53D113G025JP6
33
4230
1100.0
GE
53D112G035GE6
219
980
2100.0
GJ
53D212G035GJ6
111
1590
35 WVDC AT +85 °C, SURGE = 45 V
3200.0
HJ
53D322G035HJ6
77
2090
4700.0
HL
53D472G035HL6
54
2780
8300.0
JP
53D832G035JP6
34
4110
50 WVDC AT +85 °C, SURGE = 70 V
1000.0
GE
53D102G050GE6
231
950
1300.0
GJ
53D132G050GJ6
131
1470
1900.0
HJ
53D192G050HJ6
94
1900
2800.0
HL
53D282G050HL6
65
2540
3800.0
JL
53D382G050JL6
51
3090
5000.0
JP
53D502G050JP6
40
3810
1000.0
GJ
53D102G063GJ6
145
1400
2200.0
HL
53D222G063HL6
86
2210
350.0
JL
53D351F200JL6
499
1000
460.0
JP
53D461F200JP6
379
1250
56.0
GE
53D560F250GE6
100.0
GJ
53D101F250GJ6
1593
420
130.0
HJ
53D131F250HJ6
1238
520
63 WVDC AT +85 °C, SURGE = 80 V
200 WVDC AT +85 °C, SURGE = 250 V
250 WVDC AT +85 °C, SURGE = 300 V
3035
263
400 WVDC AT +85 °C, SURGE = 450 V
100.0
JL
53D101F400JL6
1524
560
140.0
JS
53D141F400JS6
1084
790
150.0
JS
53D151F400JS6
1011
820
Revision: 04-Nov-13
Document Number: 42037
3
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000